Question about Hitachi Televison & Video

1 Answer

I have a 50DX10B TV ,the red when you try to set it on digital array is pulled down in the top left corner ,the cross is flipped on its side,picture is pulled down across the top of screen,red color,double image.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 505 Answers

Sounds like a convergence failure, here is a tutorial I made:
http://www.fixya.com/support/r5001731-convergence_diagnosing_convergence
Let me know if I can be of further assistance.

Posted on Sep 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Green and blue color sansui tv


No red color is the problem to your set. The video output section circuit, the board plugged on to the neck of the picture tube need to be troubleshooted for any defective component/s or loose solder terminals. Visit the site named 'Electro-help' for more details. Click this link. View it in 'Flip card' option, which can be selected from the drop down box menu by the [Sidebar] tag, at the top left corner of the display window. It will make search easy. There are more than 900 posts to different brand TVs now.
Pull up older posts there, and come towards the post describes about 'one color predominant screen'. You can get more details.

Oct 05, 2012 | Sansui 27" TV

1 Answer

Red is pulled down ,double image,top left corner, Hitachi 50dx10b hitachi


I have the same problem except my red and green are both doing it. the blue is straight but fuzzy.

Nov 09, 2010 | Hitachi Televison & Video

1 Answer

Can not line up the red digital array crosses along the left side of the tv screen


Same thing happened with mine, tried to fix it myself with no avail, called a repairman, $300 to fix.

May 09, 2010 | Hitachi FDX Series 43FDX10B 43" Rear...

1 Answer

Green wave on left top and center top in my 43FDX11B TV


replaced both convergence ics in the tv.also check for open resistors near the convergence stk ics.

Jul 17, 2009 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

My 60" Phillips tv has a blurry picture at the bottom and the top


The convergence output IC's need to be changed. A very common problem with all projection tvs.

Jun 04, 2009 | Philips 60PP9352 60" Rear Projection...

1 Answer

Apex gb5108


Your Convergence is off. Go through the menue to the CONVERGENCE and follow the on screen instructions.

Start with the RED gun and align each cross point starting with the upper left corner.

You will be pulling the red to match the green.

If the television shuts down during this process, it will reset the convergence and you can try again.

After you get the red gun perfectly aligned with the green, start with the blue.

follow the on screen directs and don't forget to store.

Use the remote for these adjustments.

I hope that this helps..

Jan 06, 2008 | Apex Digital GB5108 51" Rear Projection...

1 Answer

Digital Array?


Replace IK04 and IK05, both STK392-110, but use instead STK392-150's for greater reliability. And don't get some Chineese knock-offs - use original Sanyo replacements. If you don't know where to get those try ACME Enterprises in Florida,
http://www.acme-sales.net/index.shtml
Also measure the low ohm feed resistors in that circuit. However usually just replacing the convergence amps will restore normal video...
Bill

Nov 17, 2007 | Hitachi 43FDX01B TV

2 Answers

Convergence problem, lower left corner fixed green gun convergence bows upward


You have a componet out of tolerance in the green drive circuits, resistor or capacitor. If you have the service manual you should be able to take some raedings off the test points for the circuit and be able to track it down. I am enclosing a link where you can purchase the service manual for that set for 10.99. They will mail it to you unless you go back to the site and request that they email it to you by clicking on the contact us link. They also offer unlimited free support if you purchase your manual. I am one of their support techs. Hope this helps. Heres the link
http://servicemanuals.vstore.ca/

Dec 27, 2006 | Pioneer PRO-119 60" Rear Projection...

1 Answer

Digital Array?


I have the very same problem. Was there a solution to landfill2004?

Nov 13, 2006 | Hitachi 50GX30B 50". Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2315 Answers

The Knight
The Knight

Level 3 Expert

73691 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...