Question about Bushnell PinSeeker 1500 20-5103 Rangefinder

1 Answer

I have a PinSeeker 1500. The unit stopped working properly. The power and the mode function still work, bu has not yardage display. There is something getting lose inside the unit. When you shake it, you can here something moving inside. What should I do?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,083 Answers

This is always a tough decision. You never really know what's going on until you take something apart. Chances are a support for the laser has a broken part. Here is a web blog about having the unit fixed:
http://www.golfwrx.com/forums/topic/402500-bushnell-1500-pinseeker-repair/
This will give you an idea of what to expect by having it serviced. Here is Bushnell's support page:
http://www.bushnell.com/products/gps/product-support/support-steps/
Good luck, hope this helps, and thanks for using FixYa.

Posted on Sep 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not give me yardage readout ??? Bullseye blinks but does not display yardage


http://www.bushnell.com/manuals/rangefinders/20-5102_Pinseeker.pdf here is the manual it will show you how to reset and also trouble shoot the issue there is an explantion to your problem on thre to on page 8 let me know if this worked please

Mar 17, 2011 | Bushnell Pinseeker 1500 Rangefinder

1 Answer

Rangefinder is 4+ seasons old - will not lock-in


for this you will need to send the unit into their repair at 8500 marshall drive lenexa ks 66214 4-6 week turnaround and put your name address and telephone number inside the package. if there is a cost they will send an estimate.

Mar 11, 2010 | Bushnell Pinseeker 1500 Rangefinder

1 Answer

I have a bushnell 1500 which has stoppeed reading yardages


for this you will need to send the unit into their repair at 8500 marshall drive lenexa ks 66214 4-6 week turnaround and put your name address and telephone number inside the package. if there is a cost they will send an estimate.

Sep 11, 2009 | Bushnell PinSeeker 1500 20-5103...

1 Answer

Bushnell 1500 pinseeker with slope+/- to go from M to Yards


Hold down the "MODE" button until the "M" starts to flash......touch the mode button again till the "Y" flashes........then touch the "FIRE" button on top.....(square button) Then it will be set to read in yards....not meters.

mtg

May 16, 2009 | Bushnell Pinseeker 1500 Rangefinder

1 Answer

No yardage displayed


The rangefinder is out of alignment. Vibration, dropping these units make small mirrors inside move slightly. Over time the receiver cannot see what the transmitter puts out. Bushnell can fix, 4-5 weeks w/o unit.

Mar 18, 2009 | Bushnell PinSeeker 1500 20-5103...

1 Answer

Yardage does not shows up at times


First, make sure you are using alkaline batteries only. Heavy duty batteries don't generate enough current for the laser to operate properly. (pg4-para2 of the manual) If the rangefinder hits targets 120 yards or less and doesn't hit targets farther....the unit needs an alignment. Send it in to bushnell, they will repair it.

Feb 16, 2009 | Bushnell Pinseeker 1500 Rangefinder

1 Answer

My Pinseeker will turn on but will not give any yardage.


Sounds like the unit needs an alignment. If the crosshairs appear in the display and stay on....it needs a CPU board and reprogramming.

Jan 13, 2009 | Bushnell Medalist Rangefinder

2 Answers

LOB ...what does it mean ????


LoB =Low Battery condition

This will happen will new heavy duty batteries also. They don't generate enough current to operate the laser properly. Use alkaline batteries only. (pg.4-para 2 of the manual)

Nov 27, 2008 | Bushnell PinSeeker 1500 20-5103...

2 Answers

Pinseeker 1500 just illustrates 1888 YM


Here's where you can get the manual:

http://www.bushnell.com/customer_service/manuals/rangefinders/20-5103_Pinseeker.pdf

I'm having the same problem, but the normal yardage seems to be working fine. I tried calling Bushnell, they said I would have to send it in to them and they would fix it. I'm thinking it's got to be something easy to fix.

Does anyone have any answers?

Oct 18, 2007 | Bushnell PinSeeker 1500 20-5103...

Not finding what you are looking for?
Optics Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bushnell Optics Experts

Joe Lalumia aka...
Joe Lalumia aka...

Level 3 Expert

3186 Answers

kakima

Level 3 Expert

102366 Answers

Mark Campeau

Level 1 Expert

44 Answers

Are you a Bushnell Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...