I applied for internet banking for SBI. Then SBI send me a letter writing my User ID and password. When i try to login using these numbers, I could not open. Is there difference between User name and User ID?

Sorry but we do not have info on foreign banks

You need to enter user Id and password .

The answer will depend on which bank you use. In general, if you have lost your password for online access, there is usually a link on the bank login page that says something like "Forgot your password?" and/or "Forgot your user ID?" Click on that link to see instructions for your particular bank.

you need to apply for internet banking with Westpac to get a user name and password.
Then www.westpac.com.au and in the top right corner is the login to do internet banking.

Visit your chosen bank's website and select the option that initiates the Net banking process. Enter your name, address and email address in the designated fields.

Provide your ATM or check card number and pin, and your Social Security Number, if required by the bank, in the format specified in the registration form.


Read the terms and conditions, which list what to expect in online banking and the bank's confidentiality policies regarding your personal information.
This section asks for your agreement--check the box provided to indicate your agreement. Proceed to create your log-in name and password, which you'll use to access your account online.

Create a strong password that uses both numbers and letters.
You must provide a security question, which the bank will use to retrieve your log-in details in case you forget it.


Complete the registration form.
Log in to your account using your ID and password, and check the account details.

Passwords and login information must be aquired from your bank before anything else. They normally come with concise details.

If there is no Java application for your phone you can use SBI mobile Banking via GPRS(internet).Follow the instructions belowFirst Please send SMS : MBSREG to 9223440000.and they will send your User ID and Password......But before to enjoy this you need to change your Password so again SMS Smpin<space>userid<space>old password<space>new password to 9223440000.After which you should visit your SBI Home Branch office for complete registration.Good luck

you were scammed

I got this info from the online User Manual:

1. go to web address http://192.168.10.1/
2. Enter the User ID. The default factory setting is "admin"
3. Enter the Password. The default factory setting is "motorola"
4. Click Control Panel > Device Security
5. In the Login User ID field, enter your User ID. Create an ID that contains multiple casesensitive characters as well as numbers. It cannot be longer than 64 bytes.
6. In the Login Password field, enter your Login Password. Create a password that contains multiple case-sensitive characters as well as numbers and symbols like “_ + )”.
   It cannot be longer than 64 bytes.
7. Re-enter your Password.
8. Click Apply.
9. Once the settings have been accepted, click Restart and log back into the Configuration Utility using your new User ID and Password.
10. Select Wireless > Basic.
11. Change the SSID to a user-friendly name and click Apply.
12. Navigate to Wireless > Security.
13. Select WPA-PSK from the ESS Authentication options.
14. Select TKIP from Encryption Status options.
15. Click Apply and then click Restart. Your wireless security configuration is now complete.
16. 
    

WEP is easily hacked by hackers. WPA-PSK with TKIP encryption is the newest, most secure wireless security measures and you can follow these directions to set it up this way.

Hope this helps you out! If so please give me positive rating (4 thumbs up)

To set up the correct security protocols for your router:
1 Click Control Panel > Device Security.
2 In the Login User ID field, enter your User ID. Create an ID that contains multiple casesensitive
characters as well as numbers. It cannot be longer than 64 bytes.
3 In the Login Password field, enter your Login Password. Create a password that
contains multiple case-sensitive characters as well as numbers and symbols like “_ + )”.
It cannot be longer than 64 bytes.
4 Re-enter your Password.
5 Click Apply.
6 Once the settings have been accepted, click Restart and log back into the
Configuration Utility using your new User ID and Password.
7 Select Wireless > Basic.
8 Change the SSID to a user-friendly name and click Apply.
9 Navigate to Wireless > Security.
10 Select WPA-PSK from the ESS Authentication options.
11 Select TKIP from Encryption Status options.
12 Click Apply and then click Restart. Your wireless security configuration is now
complete.