Question about PC Desktops

1 Answer

Philips SPC900NC How do I get the camera microphone to work through its USB connection

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

Hi john673,

make sure that the specific driver/software for that camera is installed properly, apparently the audio driver for the microphone is also included on the software packaged with it. If you din't have the drivers, you may try to download it here:

http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?scy=US&slg=AEN&cat=PC_CAMERAS_CA&sct=WEBCAMS_SU&session=20080513045623_121.97.80.100&grp=PC_PRODUCTS_GR&ctn=SPC900NC/27&mid=Link_Software&hlt=Link_Software

if the camera and its drivers are installed properly, you may check the voice recording properties of your pc and try selecting the philips/usb microphone from the drop down box.

hope this helps

Cheers and best regards,

Posted on May 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I am trying to use a new Logitech USB desktop microphone with my Mac OS X version 10.4.11. It seems to be working beecause the screen icon fluctuates when I speak, but I cannot find a way to record...


please keep the microphone a bit away from ur screen... its because, powerful electro magnets will be ther in the microphone... wen u keep it very close to the screen, the waves cause the fluctuation in the screen which wil shorten the life off ur screen

Jun 15, 2008 | PC Desktops

Tip

How to use a pc camera(web cam)


· Insertthe installation disc that comes with your webcam (PC camera) and follow theinstructions to install the drivers. This varies with different models andmanufacturers. · Connect the USB cableattached to your webcam to an open USB port on your computerwhen prompted to by your installation disc. · Place the webcam on topof your monitor and maintain a distance of about three feet at most. Thisensures that you remain in frame and the camera stays in focus. · Adjust the angle of thewebcam so that the lens and the built-in microphone are facing you. Adjust yourdesktop speaker to face you for proper audio playback. · Launch the messengerprogram you like to use and begin video chatting with your family and friends

on Oct 07, 2010 | PC Desktops

1 Answer

Microphone dosen't work


Just go and buy a microphone on its own, they are cheap maybe 10, it will plug in and work perfectly, you have over complicated yourself

Apr 19, 2014 | Dell Dimension 8300 PC Desktop

1 Answer

I want to put my video on my pc but im not sure what connections from camera to pc i have a sony and i only see on the pc a place for head phones or for a microphone


Your camera probably came with a cable that helps you do this. The cable has a rectangular USB connector on one side, and a smaller trapazoid connector on the other end. This cable connects your camera to your PC. The cable goes into the side of your camera, and the larger end goes into the BACK of your computer. There are usually 2-6 USB connectors on the back of the computer. It doesn't matter which one you connect the camera to - they're all the same. When you connect the camera, your computer should automatically come up with instructions. Good luck!

Mar 03, 2010 | E-Machines T5048 (7136) PC Desktop

1 Answer

Microphone doesn't work with small plug


I'm just taking a stab in the dark here but bare with me on this, I got a lot of info stored in this old head so it takes a while.

If you look at the jack for the microphone, Does it have 2 sleaves and a pin or just 1 sleave and a pin. If it has 2 then you will need an adaptor (Normaly Stereo jack to XLR). If it has 1 sleave then your going to need a preamp.

Apr 20, 2009 | PC Desktops

1 Answer

Ive conected my philips webcam SPC110NC to the usb port in my computer and ive tried to use it on windows msgr. no pic has showed. me and the person im connecting to have the same camera, neither one can...


What a joke. You have to install or at least configure drivers (from Philips; read what came with the camera for a site to get drivers by) for the camera to work. Then, when you can select the camera as an input device and 'scan' images (e.g. in GIMP or IrfanView or some photo tool) from the Philips unit, you're ready to configure Windows Messenger to use it. After that...you should be seeing pictures fine.

It's like you connected a piano to an orchestra, but no pianist (or more directly, a camera head to a vision controller, but no shutter sync control.)

Sep 30, 2008 | PC Desktops

2 Answers

My computer tells me I am not connected to a usb cable


Were you able to solve your problem?

Brian

Aug 01, 2008 | PC Desktops

2 Answers

I buy a webcam spc900nc/27 but is not working n my computer has windows vista


hi there,

please try these links:-

http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?scy=CA&slg=ENG&cat=PC_CAMERAS_CA&sct=WEBCAMS_SU&session=20080413160731_209.59.110.56&grp=PC_PRODUCTS_GR&ctn=SPC900NC/27&mid=Link_Software&hlt=Link_Software

http://www.opendrivers.com/driver/247742/philips-webcam-spc900nc-27-driver-r5b-windows-xp-english-free-download.html

http://www.opendrivers.com/driver/247743/philips-webcam-spc900nc-27-pc-software-v1.0.900.48-windows-all-free-download.html

Apr 13, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...