Question about HP LaserJet 2820 Printer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
My HP Color Laserjet 2600n Printer is giving me error as
" 50.2 Fuser error " . then every time i have to reatart my printer.
please give me suggestion.
thanks and regards.
Posted on Mar 28, 2008
The problem you are having is with a clutch also known as CL2 or T2 Clutch. The part is available through HP at http//:partsurfer.hp.com. Just put in the part number RH7-5335-000CN and it will come right up for order. It cost 26.73 plus shipping.
The disassembly is a little intense but completely do-able with the service manual walking you through it. The clutch is part of the drive assembly on page 366 (#3). The diagram looks intimidating but its not as the full hunk can be taken off and then the clutch removed for replacement.
Here's a free copy of the manual:
Hope that helps you. If so hit it with a fixya!
Posted on Aug 30, 2008
I had the same error, I had to take the left side cover off, (looking at the front of the machine) and found a small piece of paper that ended up right in the middle of a sensor flag! Of ALL the places to land. I pulled it out, it worked, end of problem! When you get the side cover off, the sensor flag is located in the middle/bottom of the printer. Hope this helps, happy fixin'.
Posted on Sep 08, 2008
SOURCE: FUSER ERROR
I just reviewed both of the above fuser issues (50.2 & 50.3). Both are highly likely (even if recently replaced) fuser damaged. I have included below a link to a free HP service manual for your machines. Start on page 309 using a volt/ohms meter to test the fuser. To address the "Guest" inquiry regarding the HVPS, there is a separate HVPS however please be aware that it is not part of the fusing circuit in this machine. If anything it would be the LVPS (Low Voltage Power Supply) however very remote. Odds are maybe 1 in 200 on your best day. I'd put 10 fusers in the machine before I bought 1 LVPS. This machine is known to eat fusers. The HVPS and LVPS at this time are just about bulletproof. PLEASE TRY TESTING THE FUSER AGAIN USING THE MANUAL PAGE 309 TO 311. If your really want the power supplies though, they are on the part number list at the end of the manual. I just looked it up and we have repaired 74 of machines to date with not one PS ever used. 59 of the 74 have been for fuser issues.
Here's the manual link:
Hope that helps you both. :)
Posted on Sep 10, 2008
From Woody Friesen:
Did the printer have a rough ride? HP's service manual suggests this to be a laser error on the yellow laser scanner, though these printers usually withstand shipping without any problems. Just for grins, if you can get the printer to get to READY again, run the printer through a complete calibration (from the control panel: Configure Device/Print Quality/Calibrate Now). The DC controller circuit board is also a possibility, but given the error code popped up almost as soon as you plugged the machine in suggests the yellow scanner has suffered some sort of mechanical damage from the trip. If the calibrate routine doesn't remedy the problem and you want to be sure, you could do the major disassembly required and swap the yellow scanner with the scanner for another color in the printer and if the error code changes to 51.2M (magenta), 51.2C (cyan) or 51.2K (black) (the code will reflect which scanner you exchanged with the one in the yellow position) you'll have confirmed the scanner is the problem, or if no change, then the DC controller is next in the chain.
Posted on Dec 24, 2008
Tips for a great answer:
Nov 01, 2016 | HP LaserJet 4700 Printer
Apr 12, 2012 | HP LaserJet 2840 Printer
Feb 17, 2012 | HP Laserjet Cp2025n Printer
Mar 11, 2009 | HP Color LaserJet 3500 Printer
Dec 12, 2008 | HP LaserJet 4600dn Color Printer
162 people viewed this question
Usually answered in minutes!