Question about Gemini XL-500 Turntable

2 Answers

How can i connect a gemini turn table with a ground cable to a input that dont have the ground connection gchristinam@yahoo.com

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Usually an external ground connection may be required if there is an audio hum present after hooking up the turntable to the amplifier.If no hum is present,then the ground cable may not be required to be connected.Also check the audio quality on play back.The ground circuit is normally completed through the RCA plugs of the right and left channels.

Posted on Sep 07, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,603 Answers

See if you can attach the ground wire to a point on the chassis of the device you are connecting it to.

Posted on Sep 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect a turntable to Yamaha Rx-v630


If your turn table has a ground wire with the R and L wires then you can not connect it to this receiver. Unless you have a switch on the turn table that chooses between internal or external amp. If you have the switch, pick external amp and then run your R and L into your TV/CD input. Good luck to you.

Jun 06, 2016 | Yamaha RX-V630 Receiver

2 Answers

Pluging in a turntable


I dont understand why you would want to connect a turntable into your phone. Can you explain?

Mar 30, 2008 | Audio Players & Recorders

1 Answer

How can I hook up my jvc rx-6018v to a gemini xga-2000 amplifier?


you can do it a couple of different ways, depending on what you're trying to do with your set-up.if you're trying to do something different than what I describe here, add a comment.
for independent volume control (each unit contols volume to a set of speakers independent of each other) use the rca 'tape' out of the jvc into the rca inputs on the back of the gemini.this puts a stereo signal from the jvc to the gemini. if you want your gemini to power your subs, get an rca y-splitter (single female to double male) and a single rca cable, hook single rca cable to sub out of jvc, connect y-splitter to gemini rca inputs, and single rca to y-splitter.

Mar 05, 2013 | JVC RX-6018V Receiver

1 Answer

I dont know how to set up a mixer Gemini 3610 to my laptop and my powered speaker i want to know what cables i need


There are several possible solutions for this. The cheapest and easiest is to do the following:
Solution 1:
1. Get an RCA stereo plug to 3.5 mm plug. This will go from your mixer to your computer. This will not be the highest quality, but will work.
2. Get an XLR cable of the length you need. I would guess a standard one with a male connection on one end and a female on the other. Connect this to your powered speaker. Also, this is a guess as you didn't include the type of powered speaker, so I can't tell you for sure which cable to use.
Solution 2:
1. An alternate idea for better sound quality would be to run a D/A converter similar to this one: http://www.sweetwater.com/store/detail/USBMix/It would give you a much higher sound quality for everything. You would run from your Gemini to this. From this device, you would run a USB cable to your computer, and a 1/4" cable to your powered speaker.

Jul 19, 2012 | Gemini Sound Products Gemini Cdm-3610 Mp3/...

1 Answer

How to connect the gemini to the computer


Easy.

In general, your PC's sound card (and its controlling software) will determine what it can connect to.

Even the most basic PC would have stereo analog output via the typical green 1/8" connector or a headphone jack that easily adapts to RCA pair for REAL audio connection. Any Line Level input EXCEPT PHONO would accept the PC's output. The output level would be controlled by the sound card software and settings.

The Gemini's Input would accept the Green stereo audio or speaker output from a standard PC, once adapted. Select Line In.

http://i.ehow.co.uk/images/a04/fa/r2/subwoofers-as-home-entertainment-set-1.1-800X800.jpg

The Gemini's Output (Record Master) would perform similarly if adapted to your PC's audio input, whatever that may turn out to be (usually Mic, maybe Line In).

Find your PC's Sound Controls and enable the applicable input. make sure the volumes of both Inputs and Outputs are turned up.

Though not applicable to theGemini, more-advanced sound cards and audio hardware would have similar adaptable 5.1 or 7.1 (paired) analog outputs and / or digital audio outputs that conform to the s/pdif or Dolby Digital standards.

Mar 12, 2011 | Philips Gemini CDM-500

2 Answers

Welding fine , then machine quit welding, would still rev up, but barely arch!


I had the same problem except it was with a miller welder. it was a bad ground connection on the ground cable. if you have an ohm meter. turn off your machine,but do not unplug it. check for resistance from chassis ground on machine to input ground if your input on the machine is good you may have a bad cable,input connection or the ground clamp may not be making a good connection to the cable. good luck!

Dec 21, 2010 | Lincoln Electric Ranger Gxt 250 Amp...

1 Answer

How can i connect my Gemini Turntable which has a ground cable connection to a device that does not have a ground cable connection?


Hi, slip the ground cable in the side of the rca connection to the device without earth point.It makes no difference if it goes in the left or right jacks. styluscity@gmail.com

Sep 06, 2010 | Gemini XL-500 Turntable

1 Answer

One turn table goes louder than the other any ideas?


If you are comparing the isignal using the same input, the problem is in the cartridge, it may have loose the ground connection or the cartridges are differents and each cartridge may have different output.
if you are using different inputs, one of them (the lowest) may be connected to the line input instead of the phono input.

Oct 28, 2009 | Technics Audio Players & Recorders

1 Answer

Trouble connecting skartz cable to audiosonic dvd/recorder


usually the button is marked av .make sure you select the correct source av1,2,3,ect

May 03, 2009 | Loewe Table PLA530 30" TV

1 Answer

How do I connect a reciever to Gemini pmx-2500


look for pre out on your gemini hook up phono cables to these then to any input on your reciever,eg cd, switch reciever to cd turn up and away you go

Jun 20, 2008 | Gemini Audio Players & Recorders

Not finding what you are looking for?
Gemini XL-500 Turntable Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gemini Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

Vito Vacirca Jr.

Level 2 Expert

140 Answers

sean tan

Level 1 Expert

15 Answers

Are you a Gemini Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...