Question about Kodak ESP 3 Multifunction Printer/ Copier/ Scanner

1 Answer

My kodak ESP3 will print and copy but it will not scan as it did just a few weeks ago.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Hi,

When some device suddenly goes haywire, the first thing to try is refreshing its driver. Drivers are just software programs, and sometimes they get corrupted.
So try updating your printer's driver. The latest version is available for free download at
http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?pq-path=12666/12667&product=EKN034524
While you're at the Kodak site grabbing the current driver, look around in the FAQ and see if others have reported a similar problem - or drop Kodak a note and they should respond.
If a new driver doesn't work, try updating the scanning software (it may be updated too by now), attaching your printer to a different USB port, or changing out the USB cable - in that order.
If none of the above work, your scanner could have "gone south" - but if so, check if the warranty will cover your trouble for replacement.

Good luck!

Posted on Sep 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Software disk will not down load can I down load the drivers etc online


Please go to the Kodak model ESP3 multi-function printer support page by clicking on the link below, or copy and paste into your browser.

Print the instructions for installationo of the software / drivers, then download and follow the prompts to install the Kodak ESP3 multi-function printer.

Make sure you select the operating system on your computer, ea XP, Vista or Windows 7.

Good Luck

http://support.en.kodak.com/app/answers/detail/a_id/36460/selected/true

Aug 28, 2011 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

I have a kodak esp3 printer and i have never been able to get it to scan. In scan mode it just comes out with black lines I can not find a phone number for kodak on the box or in the box it`s just like...


Dear Sir/Ma'am,

If you get lines on the scans usually the scanner CCD is faulty - Please print a picture and then copy that picture, If the print looks fine but the copy has lines then then scanner on the printer is faulty and the printer would need to be replaced (if in Warranty).

Please then contact Kodak with the outcome of the steps listed above. You can contact Kodak either on 0870 243 0270 or email them on kdisc.allinone.uk@support.kodak,com (UK only)

Regards,
CViveiros

Oct 23, 2009 | Office Equipment & Supplies

1 Answer

My printer will not print anything on the paper, I have checked and it has ink and is hooked to the computer by the USB port


Kodak ESP3:

Print a demo sheet.
1. Verify that inkjet paper is loaded in the paper tray.
2. Press and hold Scan + Copy/Resume simultaneously until the On/Off light flashes green.

Does a blank print appear? If so:

contact Kodak at 1-800-421-6699.
To expedite the call, provide the agent with the one of the following reference IDs - PH02 for image quality problems or BP01 for problems with blank prints.

If slowly and in increments, reference BP02

Sep 24, 2009 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

Printer says paper jam, now scanner wont work


you will need to open it to remove this piece of paper.

Aug 14, 2009 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

Black vertical line (1 inch wide) appears while scanning/copying


For this kind of problem you need to call the tech support because the printer is already messed up and it is in need of replacement

Hope this help

Byron

Jun 15, 2009 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

Kodak ESP3 scanner problem


Uninstall the driver then after that install it again.If is not work reboot your pc.

May 19, 2009 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

Scanning


See page 33 in the user manual:


http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/ESP3/ESP3-UG_en-US.pdf

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

May 06, 2009 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

Kodak esp3 scanning question


How do I scan a picture from my Kodak ESP3 printer to send to someone?

Jan 20, 2009 | Office Equipment & Supplies

Not finding what you are looking for?
Kodak ESP 3 Multifunction Printer/ Copier/ Scanner Logo

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Cindy Wells

Level 3 Expert

5056 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...