Question about Stanley 77 500 Intellilaser Pro Stud Sensor & Laser Level

Open Question

I need the instructions to use the Stanley FatMax Stud sensor 400, please.

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Just purchased a Stanley FatMax 10-778 retractable

1. Make sure the side lock is unlocked.
2. Push the thumb tab all the way to the front of the blade handle.
3. Insert the blade in the opening, you may notice two notches on the top side of the blade.
4. Press the small blade release button as you slide the blade into the knife. You may have to jiggle up and down to get the two notches on the blade fully into the handle.

If properly inserted, the exposed area of the blade should look very close to an equilateral triangle.

make sure both notches of the blade are inside the handle. They notch into the thumb lever.

good luck

Posted on Apr 11, 2010

Testimonial: "Thanks so much!"

nielsonplumb
  • 89 Answers

SOURCE: I have a stanley FatMax. How do I insert the blade

On the side there is a big gold wheel, twist counter clockwise and the case should split in half, the blade is held by a magnet, prise the old blade off and replace with new one, then put case back together and tighten gold wheel clockwise
Goodluck!

Posted on Mar 07, 2011

  • 1015 Answers

SOURCE: my stanley stud sensor 200

Without knowing what room you are using it in it could be a underlayment of wire mesh that you are reading. If it is an older home this was used often as a backing for plaster instead of lath.Thank you.

Posted on Jun 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I calibrate a FatMax digital level?


Mark, Automatic calibration, check the little pockets on case instructions inside, the instructions show how.
Check the attached links,
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Stanley FatMax Digital level mp4

Stanley fatmax digital level instructions Measuring Tools Measuring Tools

STANLEY HAND TOOLS Measuring Leveling Layout Levels Stanley FatMax Digital...

http://www.microprecision.com/equipment/STANLEY-CALIBRATION.html

Mar 04, 2016 | Measuring Tools & Sensors

1 Answer

Stanley instructions


Try using a magnet instead. Move the magnet back and forth against the wall, slowly... until it sticks to one of the ferrous screws hidden in the sheetrock. These hidden screws are holding the wall board/sheetrock onto a stud.
Magnets! Free stud finder! and no batteries to replace!

Aug 26, 2014 | Stanley 77 500 Intellilaser Pro Stud...

1 Answer

Instructions


Here's is a link to the manual for download - direct from Stanley.
Good luck!

May 22, 2013 | Stanley 77 500 Intellilaser Pro Stud...

1 Answer

I NEED AN INSTRUCTION MANAL FOR STANLEY CL2


You should be able to get information from Stanley Black and Decker

Apr 08, 2013 | Cross Cst Stanley No.CL2 Fatmax Line Self...

1 Answer

Stanley fatmax s300 manual


Go to http://www.youtube.com/watch?v=QInszVD9WpE&feature=youtu.be - doesn't tell you everything, but better than the manual Stanley ship with the product, which is just a collection of hard to decipher graphics.

Feb 03, 2013 | Stanley Measuring Tools & Sensors

1 Answer

Instruction for Stanley FatMax Stud Sensor Finder 400 (77-730)


Please people dont waste your money but a cheap standard one Stanley 77-730 stud finder is bad does not work at all , miss my old cheapy never failed me

Mar 05, 2012 | Stanley Measuring Tools & Sensors

1 Answer

Need instruction manuals


you can find manuals for power tools such as the stud sensor at http://powertool.manualsonline.com/

Dec 31, 2009 | Stanley 77 500 Intellilaser Pro Stud...

1 Answer

Dont know how to use


Hello,

Here are instructions to get the manual for this sensor:

Go to:
Stanley Support

Click on the "Knowledge Base" link.

When the window opens type 77 115 in the search block and click on "Search". (NOTE: Leave a space between 77 and 115 or this will not work.)

The Instruction manual should be on top of the list that appears.

Click on the link under the "Article Name". (77-115 Intellisensor Plus Instructions)

On the next window click on the small icon under "Format". That will open up a PDF file for you. Save it to your computer for future use.

If you have any trouble, just comment back.

Thanks for using Fixya.

Mar 24, 2009 | Stanley 77 115 Intellisensor Plus Stud...

Not finding what you are looking for?
Stanley 77 500 Intellilaser Pro Stud Sensor & Laser Level Logo

Related Topics:

1,410 people viewed this question

Ask a Question

Usually answered in minutes!

Top Stanley Measuring Tools & Sensors Experts

Lawrence Oravetz

Level 3 Expert

9324 Answers

Steve

Level 3 Expert

3287 Answers

john h

Level 3 Expert

11176 Answers

Are you a Stanley Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...