I have a belkin N wireless Modem - router and i try to connect to the internet but i doesnt, all the lights are blue exepct the internet one, that flashes orange...and when i troubleshoot it says that the dns server is not responding, i tried to flush the dns and register it again but still nothing, i even tried to reset the router and still nothing...can somebody help me

sounds like you have to reset the router and put in your info again as when it was new ...

1. Take a Ethernet cable and connect your modem from internet port of the belkin router and power on your modem.
2. Take another Ethernet cable and connect your computer from Anyone empty Ethernet port of the belkin router. (if you have laptop then you may connect your laptop using wireless facility. You will find the username and password in the back of your router) .
3. Now you need to power on your modem and wait for all lights to turn into green or blue lights. If all you have yellow light on your router. Then you need to restart your modem and wait for 2 minute. For more information you can visit : Belkin Router has solid orange light
4. If you have solid green light on your belkin router, you need to go to your computer and open your browser.
5. At the very top address bar you need to type the ip address 192.168.2.1 for opening the router setup page. (Sometimes the ip address may be different, you can check the router's ip address via running the ipconfig)
6. Now you will be able to see belkin router setup page, so you need to click on detect my connection.
7. If your computer will able to detect the connection properly then this will forward you to the wireless setup page. Here this will ask you to change the password (If you want) and click on next.
8. Finally you will able to see all configurations window, so you need to check all configuration and click on save and continue to save all settings on your router. Now you belkin router will reboot and this will show you router admin page.

Finally your belkin router will setup and you will able to use the internet. you may try to connect the devices, whatever you want to connect with it.

Hi Friend,
Before checking these.please disconnect the Modem from router.Connect the Modem directly to your computer or laptop and check whether you are able to access the internet. If not please check with you Internet Service Provider.

Regards,
Aysaam

When there is limited connectivity check if the laptop gets an IP address from the router. ELse try configuring it manually. Restart the laptop if necessary.

Please rate if helpful.

Thanks

Wireless light will lit up only if any wireless computer is connected to Belkin's wireless network.
First, connect to Belkin's wireless network that you can scan.
After you connect, try to go online
It ll work...

When facing the router, Globe/Internet LED is on the right. Below are the LED indicators; Check the steps below:

Wireless Security - This light will only turn on if the wireless security is enabled.

Wireless-Computer Status - This light will turn on if a wireless computer is connected to the router.

Wired-computer Status - This light will turn on if a wired computer is connected to the router. Connect the wired computer to any gray port on the router. (There are 4 gray ports).

Router Status - Power light. Solid blue means the router is on and ready.

Modem Status - If this is off, it means the router is not connected to the modem. Make sure the cable is connected from the modem to the yellow port on the router.

Internet Status - This light will indicate if the router is connected to the internet.

If this is the first time you are installing the router, then what is important is to get the router, wired-computer and modem lights ON. Once they are on, you may insert the CD that came with the Belkin router to setup the internet connection and wireless settings.

Try restoring the Belkin back to the factory default by powering up the Belkin and pressing the RESET button on the back of the Belkin for 7 secs. Then connect a LAN cable from the computer to the Belkin, open IE browser and type the configuration IP address and configure the wireless settings ie. SSID, encryption etc. The computer wireless cards will need to be configured with the Belkin wireless settings to allow them to communicate with the Belkin.

Hi jackmyrtue,

Here's what the lights on the front indicate:


A. Wireless Security

• OFF Wireless security is off
• Solid Blue Wireless security is on

B. Wireless-Computer Status

• OFF Wireless computer is not present
• Solid Blue Wireless computer is connected to the Router
• Blinking Amber Problem with wireless computer onnecting properly to the Router

C. Wired-Computer Status

• OFF Wired computer is not present
• Solid Blue Wired computer is connected to the Router
• Blinking Amber Problem with wired computer connecting properly to the Router

D. Router/Power Status

• When you apply power to the Router or restart it, a short period of time elapses while the Router boots up. During this time, the "router" icon blinks.
• When the Router has completely booted up, the "router" icon becomes a solid light, indicating the Router is ready for use.
• OFF Router is off
• Blinking Blue Router is booting up
• Solid Blue Router is on and ready

E. Modem Status

• This icon lights in blue to indicate that your modem is connected properly to the Router.
• It turns amber when problem is detected.
• OFF Router is NOT connected to modem
• Solid Blue Router is connected to modem and functioning properly
• Blinking Amber Problem with modem

F. Internet Status
This unique icon shows you when the Router is connected to the

• Internet. When the light is off, the Router is NOT connected to the Internet.
• When the light is blinking amber, the Router is attempting to connect to the Internet.
• When the light is solid blue, the Router is connected to the Internet.

When using the "Disconnect after x minutes" feature, this icon becomes extremely useful in monitoring
the status of your Router’s connection.

• OFF Router is NOT connected to the Internet
• Blinking Amber Router is attempting to connect to the Internet
• Solid Blue Router is connected to the Internet

I hope this helps figure out your PS3 issue.

Thanks and don't forget to leave a rating.

Mark

the red light means u havent got a connection if u have installed properly try upgrading the firmware the problem might be the routers
http://www.belkin.com/support/product/?lid=en&pid=F5D9230-4&scid=221