Question about Sony DVP-NS725P DVD Player

1 Answer

Trying to connect sony dvd player to hdtv

I have a sony dvd player DVP-NS725P that I am trying to connect to a receiver and to my HDTV. I am so confused with all these cables Help

Posted by on

  • Anonymous Mar 19, 2014

    My Sony 5280S-CB-Plus won't work when I connect it to my computer mother board when I start my computer

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 170 Answers

You will need some cables first. It's really not that difficult once you know what each cable does.

Since you're only connecting from the DVD player to a receiver, this should be simple.

There are 4 solutions depending on what cables you have.

Composite - Yellow, Red, and White ended connectors.
S-Video - Black 4-pin connectors.
Component - Green, Blue, Red and sometimes extra Red, White for audio.
HDMI - heavy cable with a wide/flat connector.

Composite connection - Connect the yellow end to the yellow Video Out of the DVD player and to the DVD Video In on the receiver. Connect the Red audio connector to the Red Audio out of the DVD player, the White connector to the White Audio out of the DVD player, and then connect those to the Red and White Ins for DVD Audio on the Receiver.

S-Video Connection - This is the same as the Composite video connection, but connect the black 4-pin cable into the S-Video out of the DVD player and into the In for DVD on the back of the receiver instead of using the yellow video cable. The S-Video cable is a video only cable and uses the same audio cables (the red and white ended cables) for audio.

Component Connection - On the back of the DVD player, connect the 3 video cables that are Red to Red, Blue to Blue, and Green to Green. These will be labeled Y for Green, Cb/Pb for Blue, and Cr/Pr for Red. Connect these video cables to the inputs of the receiver the same way Y for Green, Cb/Pb for Blue, and Cr/Pr for Red. The audio connection is the same as composite and there should be a place on the DVD player that will tell you what audio is for Component. This is also the same on the back of the receiver.

HDMI Connection - This one is the easiest to connect as your audio and video are in the same cable. Plug in your HDMI cable in the back of the DVD player (there should only be one) and then to the HDMI connection for DVD on the back of the receiver.

Now...once you have your connections made, turn on your DVD player, set your receiver to DVD, and enjoy.

If your receiver does not have video inputs, you will need to run the video lines directly to your TV while the audio lines go to your receiver. This will mean you will need to set the receiver to DVD as well as change the channel of the TV to the input you have the DVD player plugged into.

I hope this helps.

Posted on May 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to program an insignia tv with my remote need the code


According to the SONY instruction manual they do not support insignia TV's with this remote sorry for the bad news

Dec 03, 2010 | Sony DVP-NS725P DVD Player

Tip

Sony DVP-NS725P Region free code.


This region free hack also works for the DVP-NS725P using the original remote control. If the first one fail try the second one, it works like a charm.
Thanks a lot....

SONY DVP-NS300, DVP-NS305, DVP-NS400D, DVP-NS700, DVP-S330, DVP-S335, DVP-S360, DVP-S336, DVP-S525D, DVP-S530D, DVP-S535D, DVP-S536D, DVP-S725D, DVP-S735D

Multi-Region:

Turn On the unit with the remote controller
Wait until "no disc" appears in the unit's display
Press Pause, 3, 1, 4, 1, 5, 9
The word "CODE" should appear in the display
Within five seconds, press the key that corresponds to the zone you want i.e. 0 for region free, 1 for region 1, 2 for region 2 and so on
Again, within 5 seconds, press Pause and Power
If the above fails to work then you may wish to try the following:

Put the player into Standby mode
Press 1 and Return on remote for region 1, 2 and Return for region 2, and so on. Use 0 and Return to return player to default region settings
Press P-Mode and Return to play DVD's with the selected region, auto-switching is Off
Press Audio and Return for auto-switching On
Press Angle and Return for MacroVision On
Press Subtitle and Return for MacroVision Off

on Mar 07, 2010 | DVD & Blu-Ray Players

1 Answer

Getting "can not play disc" message from sony DVP-NS725P dvd player.


Have you tried taking off the cover to see if the disc is spinning inside when you get this message? The motor that spins the disc could be shot.

Sep 04, 2010 | Sony DVP-NS725P DVD Player

1 Answer

Unlock Sony DVP NS725p


Ensure the child lock feature is disabled. Attempt to open the disc tray. If the issue is not resolved, turn off the DVD player. Unplug the power cord from the electrical outlet for 30 seconds. Plug the power cord back into the electrical outlet. Attempt to open the disc tray. If the disc tray still does not open, simultaneously press the POWER + STOP + EJECT buttons. If the disc tray still does not open, simultaneously press the DISC1 + STOP + EJECT buttons or the RETURN + ENTER+ POWER buttons. If the issue is still unresolved, service may be required. The Sony eService Web site at http://eservice.sony.com/ can assist you in obtaining service from a Sony Service Center or locating a Sony Authorized Servicer.

Jul 24, 2010 | Sony DVP-NS725P DVD Player

1 Answer

My sony DVP-NS725P will not play discs


Run a DVD disc cleaner through it and see if that helps. If not then open it up and manually clean the laser pickup lens. Then give it a go. If that didn't help, then open it back up and replace the optical drive.

Feb 18, 2010 | Sony DVP-NS725P DVD Player

1 Answer

What is a good burn program for this DVD player? I have tried 3 different programs, and all them will not play in the dvd player. I have a MAC.


The Mac and software is not the problem. The Sony DVD player is the culprit. Sony has some proprietary bullsh.t lock hardwired into their system to not play burned discs.

Go on e-bay and look for region free DVD players, which will play any disc like a champ. Sony is a good brand, but they are picky about playing certain discs. Re-gift this thing to someone during Christmas or sell it.

Dec 17, 2009 | Sony DVP-NS725P DVD Player

1 Answer

Dvp ns725p says: cannot play this disc


Is it for all discs or just certain types of discs? Some DVD players simply cannot play some formats unfortunately. Often, the issue is with burned DVD-R or DVD+R discs or CD Video. Sometimes it's simply a matter of a bad burn. Refer to your manual as to the formats compatible with your player.

Nov 07, 2009 | Sony DVP-NS725P DVD Player

1 Answer

Need a code to unlock it


i have a daewoo dvd5700 and the remote got lost. I am in search of key codes for a universal remote in order to program the unit and use it. can you help me. Thank you, Sincerely yours, James S. McMillian 210-330-5562 alamohippy@aol.com

May 28, 2009 | Sony DVP-NS725P DVD Player

1 Answer

SONY DVPNS725P


no cant be done sorry

Apr 09, 2007 | Sony DVP-NS725P DVD Player

Not finding what you are looking for?
Sony DVP-NS725P DVD Player Logo

362 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96396 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Nasir Muhammad
Nasir Muhammad

Level 2 Expert

148 Answers

Are you a Sony DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...