I want to connect my pc to my sanyo dp26648 - Sanyo DP26649 26 in. TV

go to this link and see if you can find your manual. Manual for sanyo dp26648 Google Search

try it on another set first to see if game or the set is the issue.

There are two reasons why your Sanyo DP26648 would has sound but no image and both are equally likely in our experience.

First, you may have a problem in the section of the power board that supplies the backlight module (called inverter) with 24V.

We've seen that several times and the problem is usually minimal - only electrolytic capacitors gone bad - and other times not so minimal.

We have a repair service for that power board and we may have some boards available too...check out at

http://www.coppelltvrepair.com/search?Q=DP26648+&As=false&Pf=&Pt=&Sid=false&btnsearch=Search

We do not sell parts through fixya. However, shopjimmy.com, http://www.shopjimmy.com/catalogsearch/result/?q=DP26648, has many parts for the DP26648 from TVs that were damaged in shipping. These are used but have only been run during QC testing at the factory. The power supply is listed as out of stock but lists for $64 when they have it.

Some other Sanyo TV parts are available here: http://www.partandproducts.net/sanyo-tv-parts.html . This site also lists the power supply as out of stock.

I hope this helps.

Cindy Wells

Required main board for Sanyo DP26648 lcd tv is available in Shop Jimmy.com for $70
Click to view image of board, make sure your tv model is as shown in your question headings.
Thanks.

Turn off and on

Pixal on Remote

use the coaxs that srews in

Hi,

You can refer to 2 tutorials :-

http://www.techlore.com/article/10061/How-To-Connect-a-Computer-To-Your-TV/

http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-tv/

Thanks.

remote is worn out cannot change volume, channel , check info etc most buttons have stopped functioning I need code to set up universal remote need it now.