Question about Sony Handycam DCR-TRV27 Mini DV Digital Camcorder

1 Answer

C31:42 This is the error signal I am getting. I don't know what it is. john

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Contributor
  • 1,812 Answers

This can be caused by several problems including the transmission gear in the tape mechanism not engaging properly or a defective clutch in the take-up spool and can be repaired fairly inexpensively. However, it’s not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I’m a professional repair technician with over 20 years in the business and have repaired many of these. I’m semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Posted on Sep 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need a drive belt routing picture for a John Deere x300 mower


For a routing or installation diagram, contact John Deere directly.

Sep 11, 2017 | John Deere Garden

1 Answer

John deere 3320 error code 03


Err 03 Reverse Pedal. Voltage signal out-of-range or not calibrated. Machine does not drive. Contact your John Deere dealer.

Oct 14, 2015 | John Deere Garden

1 Answer

How to add brake lights/turn signals to rsx 850i john deere gator


I would look into buying a turn signal and brake light kit, I saw a couple on Ebay. Also should be able to get them at your local John Deere dealer, although like anything green they get good green money for it.

Apr 29, 2015 | John Deere 2014 Gator RSX 850i Midnight...

1 Answer

Signal and brake light problems; Indicators flash fast on dash but not outside; Emergency flashers flash normally on the dash but still nothing on the outside. Brake lights don't work. This has been an...


Replace the turn signal switch. They can be fixed if your up to it, but you have to disassemble the switch. there are parts that have to go back in the right order. Let me know. The longer you let this go , you will start to lose the headlights. All the outside lights run threw the turn switch.

Sep 21, 2011 | 2005 Pontiac Montana

2 Answers

We bought a house with this lock and don't know how to cancel the previous code and start a new one. We don't know how many digits to put in for the code.


To change your code:

1. Remove the inner cover plate from the lock.

2. Locate the small round reset button near the left side of the circuit board (Red or Black).

3. To program, press the reset button once, then enter your 4-8 digit code on the exterior keypad, then immediately press the middle lock button on the exterior keypad. You will hear a beep. This signals that your code has been accepted.

4. To enter a second code, follow the same procedures as in step 3, but this time press the reset button twice then enter your code.


hope this helps

John

Sep 16, 2011 | Weiser Lock Powerbolt 1000 Lock

1 Answer

I have a red screen and is says a serious error hqas occured contact cust support


No easy fixes for problems that don't give an error code. Go to the support site for PS3's and contact customer support like it says.

http://us.playstation.com/support/?s=ps3#ps3x

Good luck in getting your system fixed!
John Vickers

Aug 12, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

I don't know where the signal light flasher is located the signal lights don't flash


Your vehicle has 2 flasher relays. One for the turn signals and one for the hazard lights. The turn signal flasher relay is located on the drivers side, under the dash, mounted on the drivers (Left) side of the steering column. The hazard flasher is mounted on top of the steering column. Do not get them mixed up.

Aug 12, 2011 | 1991 Chevrolet Corsica

1 Answer

My turning signal don't work but the flashers do work. I have changed all fuses and they still don't work.


since you know where the fuses are, you also know where the flashers are. the flashers are the same part so unplug the one for the emergency flasher and put it into the socket for the turn signals and vice versa. if the signals now work but not the emergency flasher you know to get a new flasher unit at any parts store. the flasher units are cubes about an inch on each side plugged into the fuse panel.

Jun 27, 2011 | 1995 Chevrolet Caprice Classic

Not finding what you are looking for?
Sony Handycam DCR-TRV27 Mini DV Digital Camcorder Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

287 Answers

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...