Question about Health & Beauty

1 Answer

Repairing electric razor

Need to know how to clean electric razor and put in new heads

Posted by on

1 Answer

Questions,
What can be done to eliminate self-starting; slide switches which have become exremely sensitive to the touch and often times turn on when set down after use.
Slide switch covers no longer return to full "off" position. Ive had to use scotch tape to prevent them powering on when placed in suitcase, for example. Is this problem characteristic of Braun razors?
Can a nonprofessional open up casing to administer a very thorough cleaning? And where would one get an instructional schematic? Can one be obtained from Braun?

Thx!! Vince

Posted on May 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I take apart razor to lubricate the motor?


Oster Classic 76 hair clipper - take apart to clean or fix ...

? 9:53
https://www.youtube.com/watch?v=nu8UaoCxtxo
Feb 20, 2010 - Uploaded by darwincollins
It is an amateur video demonstrating how to take apart a Classic 76 clipper. ... your clipper with Oster Kool Lube 3 Clipper BladeCoolant Lubricant Cleaner. .... Motor did not slide out but all wires shredded and motor was in pieces ... What's that little button just below the '76' for and how do you know exactly ...

MOTOR TEST Checking the motor on broken Hair clippers ...

? 0:32
https://www.youtube.com/watch?v=TaWUxcdGBSg
Mar 29, 2015 - Uploaded by You can Fix It!!!!
Testing motor on shears clipper trimmer razor shaver. How doyou know if the blades or motor are brok... ... oils oiling oileddisassemble disassembling take apart taking apart .... 3:21. How To ' Change Cord ' Change Switch ' How To Repair Wahl Clippers ' - Duration: 2:24. by ronsclassickuts 13,453 views.

How to sharpen a Norelco electric shaver - Instructables

www.instructables.com/.../How-to-sharpen-a-Norelco-electri...

InstructablesYou will need a small brush to clean shaver and heads, also a flat piece of ... I then take a tool I made from a broken Norelco razor and a writing pen which ... Mix a 1;3solution of White toothpaste [1] and Mineral Oil [3] on the back of a ... Disassemble[keep the screens & blades mated] and spray with Bathroom Cleaner. 5.

Taking Care the Right Way to Keep Electric Razor Like New




Dec 06, 2015 | Health & Beauty

Tip

How to use an electric shaver


If you are a using an electric shaver for the first time, I hope that this article will get you going. Proper techniques will ensure the best, closest shave possible. Maintaining the razor by properly cleaning and recharging it will also ensure that the razor works correctly and does not malfunction during use. Proper care and maintenance of the electric razor will also ensure that the razor will last for years to come. Consider this article as a shaving-best-practices template for your first electric shaver.<br /> <br /> Firstly, clean your face and dry it. Electric shavers do a better job when your face is clean. Turn the electric razor on and begin shaving against the direction of hair growth, moving the shaving head linearly and in circles. Circular motion Stretch the skin with your other hand to make the hair stand up straighter so the razor blades shave closer.<br /> <br /> After shaving, turn it off and rinse the cutting heads under warm water. You can also use jet clean system once a week to clean your shaver. Make sure that you charge it for the time specified in user manual. Overcharging may cause damage to the battery.

on Mar 03, 2011 | Health & Beauty

1 Answer

How do i clean my with my philips hq2000. instructions are in a different langue


  • 1 Set the Jet Clean System base on a flat surface and pull the cleaning reservoir out of the base.
  • 2 Unscrew the fill cap on the reservoir, pour Jet Clean Solution into the reservoir and replace the reservoir in the base.
  • 3 Plug the power cord of the cleaning base into and electrical outlet.
  • 4 Remove the protective cover on the razor head and place it to the side. The protective cover must be removed or the cleaning system will not work.
  • 5 Slide the razor head into the base, push back on the razor handle and press the locking lever down to keep it in place. The indicator light on the cleaning base will blink, indicating the razor is inserted properly and charging.
  • 6 Press the "On/Off" button on the side of the cleaning base. The razor will lower into the cleaning solution and begin the cleaning process, which takes approximately one hour. The razor will rise out of the cleaning solution when the cleaning process is complete.
  • 7 Lift up on the locking lever, remove the razor from the cleaning base and rinse the razor heads under warm water to remove any remaining cleaning solution. The razor is now clean and ready for use.

  • If you just have the solution and not the Jet Clean System, then I would presume you could soak just the heads in the solution to clean them and then rinse it off.


  • Jul 22, 2014 | Philips Norelco Hq200 Jet Clean Solution 2...

    1 Answer

    I have a Philips Norelco 7310XL razor and I have a problem. I recently moved, and in the process, something happened, and my razor isn't working. When I turn the razor on, the blades turn slightly and then...


    It sounds like maybe one of the blades is damaged and it is jamming the whole thing. Try taking apart the head assembly and then insert each head one by one turning the shaver on in between each one. This should identify if one is damaged and causing the problem

    If you require new heads, you will find them at shaveroutlet.com. See link below

    http://shaveroutlet.com/norelco-philips-hq8-spectra-sensotec-replacement-heads-p-251.html

    Sep 18, 2010 | Philips Norelco 7310XL Electric Shaver

    1 Answer

    My razor blade heads no longer rotate but when removed the mechanism underneath is spinning normally - the razor is clean and fully charged.


    It sounds like your heads are damaged and need replaced. You can not repair theheads if damaged. You will find replacements for Arcitec shavers at shaveroutlet.com. See link below

    http://shaveroutlet.com/norelco-philips-rq10-arcitec-replacement-heads-p-353.html

    May 06, 2010 | Norelco Arcitec Electric Shaver with Jet...

    1 Answer

    I have taken out the heads to clean and put them back and n ow it wont shave me


    Remove the head assembly again and check to see if anything is out of place or missing. If not, try reinstalling the shaver head assembly and give each individual head a light push and spin to try to get the drive connections to line up with the razor.

    Then turn the razor on and off quickly for a second or so to let the razor align itself with the shaver heads. If this doesn't resolve the issue, then my first reaction is that you're missing a part(s) that might have fallen out when cleaning.

    Give it a try and let me know if it resolved the problem.

    Hope you find this Very Helpful and best regards!

    Aug 20, 2009 | Philips Philishave HQ7780 Electric Shaver

    1 Answer

    My R-1000 remington head broke


    You can order a replacement from - ElectricShaverStore.com for $8.95 plus shipping

    May 30, 2009 | Remington R-1000 Electric Shaver

    1 Answer

    How i clean my razor


    I have this razor as well. Just flip the heads open, dump the hairs in the garbage and rinse the heads (while open) under hot water. Keep the heads open until dry and close on up.

    May 20, 2009 | Norelco Arcitec Electric Shaver -...

    1 Answer

    The razor head comes loose from the two arms.


    I had a similar problem where one of the side covers popped off. I was able to reattach it, by carefully aligning the spring and pushing back into place. If you've lost the pin, you're out of luck. Braun does not make these kinds of parts available for user servicing, unfortunately.

    However, the 7000 series models are all compatible with each other in terms of motor, battery, and razor head armature. You could try locating a moderately used example on the cheap (maybe less than $20) and then cannibalize it for the parts you need.

    Do NOT send it off to Braun for servicing, as you will be charged much more than the shaver is worth. If it comes to that, you're better off just going with an 8000 series shaver.

    Mar 11, 2009 | Braun Syncro 7526 Electric Shaver

    4 Answers

    Clean Cycle Never Ends


    i have the same issue but the charge/clean light on the razor itself wont come on or charge at all. Braun said to send it in for repair/exchange and to find out whats wrong with it.

    Mar 04, 2007 | Braun Flex XP II 5790 Electric Shaver

    Not finding what you are looking for?
    Health & Beauty Logo

    Related Topics:

    399 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Health & Beauty Experts

    Robin Hill
    Robin Hill

    Level 3 Expert

    1262 Answers

    wcdoc1953
    wcdoc1953

    Level 2 Expert

    278 Answers

    yadayada
    yadayada

    Level 3 Expert

    69244 Answers

    Are you a Health and Beauty Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...