Question about Tally Line Matrix T6050 Printer

5 Answers

SHUTTLE ERROR The printer did not print with a sound as if it is trying to print and after sometimes, it displys shuttle error

Posted by on

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Check shuttle sensor (during trasmission it will show 5v and when it does not reflect it will show 0.4v) and see where there is ant teer in shuttle belt..

Posted on Jun 21, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 193 Answers

Does one have to tear the printer down to get to the belt..I have a service on this one..help me?!

Posted on Jul 09, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Shuttle fault error

Posted on May 27, 2009

Check shuttle motor belt-probably fell off

Posted on Jun 04, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Clean the Encoder Strip and Sensor at Shuttle... in T6306

Posted on Jan 30, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not printing properly


Mainly canon ip printer show 5200 error. It means your printer's hardware may be in trouble. It may be occur in your paper feeder unit. printer head unit or due to various kind of sensor. try to find what kind of unit is in trouble.
Thank you

Jun 01, 2013 | Printers & Copiers

1 Answer

My HP Deskjet 3050A copies and scans but will not print


go to devices and printers check whether there is check on pause printing or any previous documents wating to print delete all documents restrat and try again to print
second issue will be some cartidge issue any error disply on machine or pc

Apr 10, 2013 | Printers & Copiers

1 Answer

Where we get IBM printer model 6400 010 print head ?


Its not really a print head, its a shuttle assy, The shuttle takes individual frets are you looking for the frets or the whole shuttle assy? What ever you are looking for i would need the shuttle part# in order to get you the correct shuttle of fret.

Feb 28, 2012 | IBM 6400 Matrix Printer

1 Answer

Hardware may be


first of all do one thing and that is keep your platen marked A,B,C in b or c position then start printer if it prints then it means your shuttle gets very much tight in position A, for that please switch off the printer remove paper and loose your shuttle and adjust your shuttle according to the movement of paper. also do one thing that is clean your shuttle senser also.

Feb 19, 2009 | Printronix Line Matrix P5005B Printer

2 Answers

Error 058 Shuttle Jam on an IBM 6400 Matrix printer


Normal 0 I suggest you get a sheet of Card Stock (Heavy paper) and place it in the feed way. Then press the print button applying a slight amount of pressure on the Card Stock so it will feed through the printer. The reason for this is in some cases I have been able to clear the paper track of debris that was deposited there over time.
Worth a try, as I have fixed a number of printers this way, saving costly repairs.
Hope this helps. Bud

Jan 06, 2009 | IBM 6400 Matrix Printer

3 Answers

"Shuttle jam" see manual problem on Printronix line matrix P 500E printer


Verify that there is nothing clamped between the platen and the shuttle.

Last time I had this fault, it turned out to be a broken wire in the harness that connects the CMX board to the shuttle module.

Other possibilities include a failed shuttle or CMX board.

Steve W
LazerTek LLC

Jul 06, 2008 | Printronix Line Matrix P5005B Printer

3 Answers

Print stops after 2 pages !


Hi my tally printer 6218 giving Ribbon motion fault, what could be done to remedy this error message ?

Jan 19, 2008 | Tally T6218 Matrix Printer

1 Answer

058 shuttle jam


Hi,
This can happen for a number of reasons.:-

a. The print mechanism needs to be adjusted ( You'll need a technician to do this if yu are not familiar.

b. Something is clogging the print mechanism, eg Old ribbon residue, or sticky labels etc.

c. The paper thickness lever is set to incorrect setting . Try adjusting it out .

Aido

Jan 18, 2008 | IBM 6400 Matrix Printer

1 Answer

Pixma mp150


when i get copy or print the appear on disply error #2 pls helpe me 2 find solution. error service 5100. For my mp 160 printer

Dec 12, 2007 | Canon PIXMA MP150 All-In-One InkJet...

Not finding what you are looking for?
Tally Line Matrix T6050 Printer Logo

Related Topics:

606 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tally Printers & Copiers Experts

Toby
Toby

Level 1 Expert

34 Answers

Tony

Level 3 Expert

2598 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Tally Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...