Question about Konica Minolta bizhub C250 All-In-One Laser Printer

1 Answer

Konica Minolta Error code C-D351 on a Bizhub C250

This is the message that apears on the screen when I turn on my Konica Minolta Bizhub C250:

Malfunction detected. Please call your technical representative.
C-D351

I already reboot it, also pressing the utility key, but it keeps on apearing...

What else can I do?

Posted by on

  • LupitaR May 21, 2008

    I have already unplugged it from the network, but it still show the error message...

    Thanks....

  • Anonymous Mar 13, 2014

    konica minolta bizhub C250 fax

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi

I have come across this kind of problem.

Is your BizHub on the network? If yes, please switch it off completely, and take the Ethernet cable out of the BizHub.

Wait for atleast 30 seconds and reconnect the cable. Now start the printer again and see if the error message goes away.

Hope this helps!

Posted on May 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bizbub 6501 error code c2823


Konica Minolta Bizhub C6501 Error Code C-2812 , what is it

www.justanswer.com > Printers
Question - Konica Minolta Bizhub C6501 Error Code C-2812 , what is it - 2F. Find the answer to this and other Printers questions on JustAnswer.

Error Code Konica Minolta Bizhub Pro C6501 Error Code C2804 ...

www.copytechnet.com > ... > Konica Minolta

Jan 13, 2011 - 10 posts - ‎6 authors
Hi Frens, I have encountered error code C2804 with my Konica Minolta Bizhub ProC6501. It's happening again n again so how to fix it ...

Konica Minolta gamma 3 Questions & Answers - Fixya

www.fixya.com > Forum > Tags > gamma 3
Question about bizhub C250 All-In-One Laser Printer ... Have a konica bizhub c6500 and getting error code 2861 any help please C 2861= ... Error C-2801 with Konica Minolta C6501 C-2801 Gamma correction /Y aborted. ... DEVELOPER (C,M,Y,K) CHARGING CORONA (C,M,Y,K) the error code C-2823 appear on starting ...

Jan 05, 2016 | Konica Minolta Printers & Copiers

1 Answer

Error C-D36F apear in my minolta c250


NVRAM problems better calll KM tech because this kind of error codes need specialez tech and procedure like NVRAM data recovery etc

Feb 28, 2014 | Konica Minolta bizhub C250 All-In-One...

1 Answer

C-1116 message on Bizhub 500


In Konica minolta Buz C550 copier teh C-1116 error code refer to :
output OP center press transportation motor drive.Check the transmission driver mechanical components(gears,rollers).To reset press and hold on the Utility key and turn ON the copier,wait to displayed Trouble reset message,release the Utility key ,touch the message,turn OFF the copier ,wait 2 minutes and turn ON.

Mar 07, 2013 | Konica Minolta bizhub C250 All-In-One...

3 Answers

P-21 and p-5 error message. and fully cyan color comes.


here is the link
http://www.ebookbay.com/ebook/938/konica-minolta-bizhub-c250-sm

if you have any problem contact me.

Download

Nov 27, 2011 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Hi In our office Konica Minolta C250 ,it show message mulfunction. error:- c0206


Hi,
C-0206 relates to tray 3.
With the copier turned on do the following
Open paper tray 3, remove paper, close tray, open then shut front door, load paper into tray 3 - hey presto!!
If the fault comes back you could have paper stuck behind the tray or have a defective lift up motor.
Regards
Taminol

May 13, 2009 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Error code C-D351 on a Bizhub C250


didn't find this code, so dis you read the code correctly and is the model write. you can try troble reset. turn off printer and then on again, holding utility key down. push trouble reset, and reboot again.

May 05, 2008 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Error code C-D351 on a Bizhub C250


are you sure that you have a correct model and malfunction ccode ??? i cant find this code on bizhub C250

May 01, 2008 | Konica Minolta bizhub C250 All-In-One...

3 Answers

Bizhub c250 error code


hi
the problem is
"An exceptional
instance occurred
due to the unexpected
Parameter in
the System F/W"
you need to upload a new f/w to the copyer

best reg
pini - israel

Feb 12, 2008 | Konica Minolta bizhub C250 All-In-One...

2 Answers

Konica Minolta bizhub C250


i think that your fax is not set up right, or maybe the machine is missing admin and machine e-mail address, that can cause too this problem.

Dec 12, 2007 | Konica Minolta bizhub C250 All-In-One...

3 Answers

Konica Milota Bizhub C250 Error Message


First power off the printer completely. Then power it back on while holding the UTILITY/COUNTER button. You will see the minolta logo, then you will see a troubleshoot reset button. Press it, you will see an OK result. Power off the printer again, then power it back on without holding the button and everything should work.

Aug 13, 2007 | Konica Minolta bizhub 250 All-In-One Laser...

Not finding what you are looking for?
Konica Minolta bizhub C250 All-In-One Laser Printer Logo

1,052 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...