Question about George Foreman GRP99 Indoor Grill

1 Answer

Grill won't heat up

I've had my GRP99 for two years and love it, but recently, it's been acting up. Sometimes, it won't heat up at all. Other times, it'll heat up, but the temperature will drop dramatically after I put the food on it to the point where I can put my hand on the grill. Most of the time, it works fine, but when it acts up, I have to unplug it and start all over again, sometimes two or three times. I paid $100 for this thing and it should last well over two years. Any advice.

Posted by on

  • bwdan Jun 10, 2008

    I have had my Foremand Grill only two months, I have the same problem-- the grill won't heat and displays an error.

  • cometomyneed Jun 16, 2008

    I have a GGR5oB and I have had it for about a year now. It worked great last summer when I would take out to use. I took it out of storeage this last week to use and it doesnt' work. It looks like the plug is not making a connection to the grill it self. Now for something that hasn't been used since last year and should stop working tells me it is POOR workamn ship.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 368 Answers

Hi shuttergirl,

It sounds like you may be needing some replacement parts (and a manual if you don't have one already. Evidently there are some reliability issues with the original parts

Go to

http://prc.prodregister.com/prodprotect/applica/

And click on "George Foreman" (lower-right portion of the page), it redirects you to a secure webpage where you can register.

https://secure.prodregister.com/prodprotect/applica/gf.shtml

Part of the page reads:
"Call toll-free or visit our websites for assistance if you need more help.

Parts & Accessories:
Phone: 1-800-738-0245 (Monday–Friday, 8:30 a.m. to 8:00 p.m., ET)

Product Warranty:
Service: 1-800-231-9786 (Monday-Friday, 8:30 a.m. to 8:00 a.m., ET)"


If I can be of further assistance, let me know. If this helps or solves the issue, please rate it accordingly.

Thanks in-advance for using Fixya.com,

Jon

Posted on Dec 30, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turbo won't work


emission control tank full, will make it act like that. have it checked out. good luck

Jul 18, 2013 | 2002 Renault Megane

1 Answer

Car Won't Start (Sometimes)


it may have jumped timing.

Mar 16, 2013 | 1992 Buick Regal

1 Answer

L have an Elna 1010 that has never been plugged in. Do I need to oil it before I use it? Is it ready to go after all these years?


check in the manual and see if it's self oiling or not,, some
machine parts are soaked in oil from the factory & don't need
to be oiled other machines have to be oiled,,if the manual doesn't
say then contact elna customer service and ask them.
I won't promise the machine will work or won't work if it's been
sitting for years ,sometimes the grease can become sticky and
hard.
you'll be able to tell as soon as you start sewing, make sure you
read the manual completely, that way you know what the machine
will do and what it won't do.
always use the proper needle for the fabric
and the proper foot
if you go over a seam and the machine seems to struggle, take your
foot off the foot pedal and use the handwheel to move the needle
manually over the seam, that way you don't bend a needle and cause
the machine to jump time.
also make sure to have a comfortable chair and good lighting and
a good seam ripper just in case of a mistake.
if you get frustrated while sewing, get up and walk around, that can
help clear your mind, I've had to do that plenty of times and I've
been sewing for 30 years.
if you don't have a manual send me a comment and I'll try to find you one.
there are several websites that have tutorials and other things for
a quilter,,
happy sewing

Oct 19, 2012 | Elna 2007 Mechanical Sewing Machine

1 Answer

2001 Ford Escape rear hatch and window won't open all the time


sounds like the system needs lubricated you'll have to remove door panel to access the rods as well as the lock mechanism clean off an lub check for any bent or loose parts rubbing

Jul 07, 2012 | 2001 Ford Escape

2 Answers

Key turns fine. Car won't turn on. Won't even crank. Sometimes pushing key further into the ignition switch with a bit of pressure helps. Battery is one year old.


What you are saying is the key switch is worn out, and there is a separate problem with the engine performance.
Either an import shop or the dealer are your options here.

Jun 29, 2012 | Saab Cars & Trucks

1 Answer

The dryer works fine in TimeDry mode, but in Intellidry mode it dries very slowly. The "Moisture Moniture" indicator lights start and stay at "Less Dry". I have replaced the moisture...


you could have bad gas coils.if the timer doesn't advance in auto dry most likely you're having heat problems,when the dryer heats and then the heat shuts off then the timer will advance,when the heat comes back on the timer stops,it does this until the clothes are dry.gas coils when starting to fail will work normally until they get hot and then no heat until the coils cool down then they will work again,on time dry the timer just keeps counting down until the time runs out no matter what's happening to the dryer.i've seen the coils fail after the first 10 minutes and other times for 20 to 30 minutes but usually if the load is big and in time dry the clothes will feel warm and you'll need to dry them a second time to get them fully dry,also while you're in ther you should clean out the dryer at least once a year,clean out the duct that the lint filter slides into,vacuum out the cabinet where the motor is and blow out the vent line,if it's a long run i use a leaf blower to blow out the line,remove it from the back of the dryer,stick the leaf blower into the vent line and blow it out,i've blown out birds nest out of some lines, your clothes will dry on time,you won't go through so many parts and you won't have to worry about a dryer fire,the gas coils are on top of the gas valve,remove the two phillips screws,lift off the cover and change out the coils.next time you use the dryer keep an eye on it,after it runs for 20 minutws start checking it,you'll hear a click,then another click and the flame will lite,look into the gas tube and if the flame isn't liting then you have bad gas coils.

Sep 10, 2011 | Maytag MDG7600AW Gas Dryer

1 Answer

Cranks but won't start sometimes. Also has cut out while idleing in traffic and again cranks but won't start. car has new battery.


From what i've seen over the years with the Chryslers i've encountered. Your describing to the "T" what appears to be a bad Crank Sensor. I will bet money that if you replace the crank sensor it will solve your problem. BUT...Also know that a bad fuel pump can do exactly what you describe in your statement. Once the pump get hot it gets to acting stupid, but yet again so can the Crank Sensor. Still, my money is on the Crank Sensor.

Jul 27, 2011 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
George Foreman GRP99 Indoor Grill Logo

421 people viewed this question

Ask a Question

Usually answered in minutes!

Top George Foreman Kitchen Appliances - Others Experts

Mike

Level 3 Expert

4349 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Angel Joseph Jr.
Angel Joseph Jr.

Level 2 Expert

684 Answers

Are you a George Foreman Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...