Question about Singer CE350

Open Question

I have a PR620 Brother embrodiery machine and the bobbin thread is showing up on top. It has never done this bebore. I have changed bobbin thread oiled and cleaned the machine. Can you suggest a solution. Thank you,

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Bobbin won't p/u thread Singer 478

i have no idea how to thread this machine ?

Posted on Aug 16, 2008

  • 1 Answer

SOURCE: brother ls2125 bobbin not picking up thread

you have the wrong size bobbin in ,its to high over the bobbin case causing it to rap around the bobbin.

Posted on Feb 10, 2009

  • 6 Answers

SOURCE: Singer CG 550 Top thread keeps wraping around the bobbin and jam

Have you checked the top thread is correctly placed in the spring of the bobbin case?

Posted on Feb 21, 2009

  • 1 Answer

SOURCE: janome straight stitch loose

I don't know if this is the right answer for any of you, but thought I'd put my 2 cents worth in. Often this can be the bobbin in backwards. It needs to unwind a certain way depending on the machine. I've heard a phrase for this: Mind your p's and q's which means some wind off to the right like a q, others to the left like a p. Mine has to unwind one way then be slipped backwards into a little slot or it does that loose bottom thread looping and bunching someone here mentioned. It seems everytime I get that problem I rethread the top thread 100 times before it clicks again and I remember it could be the bobbin thread. Either your manual will tell you the correct way, or you could experiment and try one or the other. Once you figure out whether you're a p or a q, mark it on your machien somewhere to remind yourself.

Good Luck and Happy Sewing!

Posted on Apr 04, 2009

ladydijjmp
  • 9 Answers

SOURCE: Top thread keeps getting wrapped around bobbin case on LX-3125

You should hold the end of the thread coming through the needle until the thread has grasped the bobbin thread.

Posted on Jun 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My brother pe770 is allowing bobbin thread to show on top sporadically which makes the stitching look like it is speckled with white. I have adjusted tension..cleaned and changed everything.


Shelia,

when sewing these parts of the design, (small stitches? ) load your bobbin with the same top thread. Just match the top thread color, and done! No more white bobbin thread in the topside of your designs.

Cheers,
Kelly
Embroidery Services
San Diego, CA

Feb 25, 2015 | Brother PE770 Computerized Sewing Machine

1 Answer

Why does the bobbin keep showing up on top of the embroidery? I have changed the bobbin, I have rethreaded the top thread, I have changed the needle, I have cleaned the bobbin area. How else can the...


Loosen the top tension a little or tighten the bobbin tension ever so slightly. If that fails you can always color the bobbin threads with a magic marker the same color as the embroidery thread. You might go to Superior Thread's web site and try some prewound bobbins. They are worth their weight in gold. Dr. Bob knows all about all kinds of thread and is very good about answering questions. I think some of his Thread University videos are available too.

Jul 15, 2014 | Brother PE-770 Embroidery Machine

1 Answer

Free motion quilting bobbin thread come to the top


check the timing between the needle and rotating hook also check the teeth for possible lost of timing maybe low or high to much.

Nov 06, 2013 | Brother CS6000i Computerized Sewing...

1 Answer

Embroidering in blue thread, and the white bobbin thread was coming through on the material. Adjusted the tension to -8, sprayed the bobbin casing and area lightly with WD40, changed the bobbin, changed...


The white bobbin thread was showing on the top of the material correct? Make sure bobbin thread is in the tension correctly, check the top thread spool and make sure thread is not caught around it, if you have a manual top tension make sure that is set correctly. Personally I would never use wd40 in a sewing machine, sewing machine specific oil is always better. You seem to be describing two different problems. The thread bunching is probably from the thread jump out of the take up lever.

Sep 12, 2013 | Brother Sewing Machines

1 Answer

Bobbin thread showing on top


Lower thread showing on top is usually a lack of tension under. lower tension can be readjusted on the bobbin case but if U cannot readjust the tension, it means that ther is somthing between the tension blade and the bobbin case body. Remove the tension blade, clean and readjust.

Jun 26, 2012 | Brother PE770 Computerized Sewing Machine

2 Answers

Brother pe770 bobbin thread is showing on top of fabric.


First check threading. If it is done properly, then it's probably because it is dirty between the lower tension blade and the bobbin case body. Remove this blade, clean, reassemble and it shoud work.

Dec 26, 2011 | Brother PE770 Computerized Sewing Machine

1 Answer

I am experiencing tension issues. Same fabric and thread, worked with the first spooling of the bobbin. Re-spooled the bobbin and now the tension is all messed up. Cannot tighten, and it's gathering...


Good day!

please try this simple tips:

Good day!

A sewing machine operator can often help themselves when their machine does not operate properly.
Here are some simple instructions, which if properly used can save time and mechanics service calls.
TROUBLE;UPPER THREAD KEEPS BREAKING;
This could be trouble;================Do this;
1.Top tension to tight================loosen tension 1 turn
2.Machine improperly threaded=========check threading
3.Thread twisted on guide post========"
4.Thread twisted out of tension======="
5.Take up spring bent or broken=======Check action of spring
6.Thread jumped off pull off finger===Check threading
7.Needle bent or burred===============new needle
8.Bad cone of thread==================try another cone
TROUBLE;LOWER THREAD KEEPS BREAKING;
1.Bobbin tensionspring to tight=======Loosen tension slightly
2.Bobbin threaded wrong===============check threading
3.Bobbin wound to tight or uneven=====try new bobbin
4.lint or thread on bobbin case=======clean inside case
5.Lint or thread inside hook==========clean inside hook
6.Bobbin case nicked bent or burred===check/change case
TROUBLE;MACHINE STARTED SKIPPING STITCHES;
1.Needle bent or burred===============change
2.Needle set in crooked===============Check
3.Thread jumped off take up spring====check threading
4.Thread jumped off pull off finger===check threading
TROUBLE STITCHES SHOWING LOOPS;
1.Forming loops on top of cloth=======Tighten bobbin tension
======================================or loosen top tension.
2.forming loops on bottom of cloth====Tighten top tension
3.Bobbin placed in case incorrectly===remove and replace
4.Bobbin thread slipped from under====check threading of
tension===============================bobbin case
5.Lint or thread in top tension=======clean between tension discs


Thank you and good luck.

Jun 07, 2011 | Brother CS-6000

1 Answer

Stitching trouble


Here is a trouble shooting chart - http://www.emblibrary.com/EL/elprojects/SimpleProduct_ELP.aspx?CS_ProductID=PR1238&CS_Catalog=Elprojects

I would start with cleaning (see maintenance section of the user's manual).

This has to be done more often with sewing/embroidery machines that have a drop-in bobbin.

Be sure to use bobbin thread for machine embroidery.

Always thread the machine with the presser foot up. This will insure the thread is seating into the tension control.

Apr 30, 2010 | Brother Disney PE-180D Computerized Sewing...

2 Answers

I have a brother 270D and the upper thread keeps breaking (common i know) but ive done everything int he trouble shooting section of the manual.. its only when i embroider too. checked different tensions,...


I had the same problem with my machine and what was causing the problem was the use of the wrong size bobbin. Check and make sure you are using the right size (type a) and if you can get bobbins already wound it would be better. Hope this will help you

May 14, 2009 | Brother SE-270D Computerized Sewing...

1 Answer

Problems


I had the same problem, but I then got a shorter bobbin. what is happening is that the bobbin is too tall and the tread is getting stuck in the bobbin. It helped me from trashing my machine.

Aug 25, 2008 | Brother PE-150V Computerized Sewing...

Not finding what you are looking for?
Singer CE350 Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Cindy Wells

Level 3 Expert

5060 Answers

mystery_soul

Level 1 Expert

41 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...