Question about Canon PowerShot A75 Digital Camera

2 Answers

LCD Monitor remains black except in stitch assist mode

I would like to get the LCD screen working in all other modes. I have treid removing and replacing the batteries. I have held set and then turned on the power and I have tried resetting settings to default as listed on page 73 on themanual. when in stitch mode. The reset settings to default comes on and the busy sign comes on but nothing resets. Any suggestions?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

I think this is most likely: A/V plug has become faulty: http://www.fixya.com/support/t980272-a85_lcd_stays_off_in_all_modes_except

Posted on Dec 03, 2011

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Can you see the menus?? Can you see pics in "reveiw" mode? If yes, and this is only a "taking picture" issue, then the LCD is good. You probably have a bad CCD. Canon USA will repair this for free. Go here for details. They will send you 2 emails. One with the UPS label and another with info sheets to be sent with the defective camera
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Posted on May 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When in video recording mode LCD screen and viewfinder are black when the lens cap is off.


It could one of a few problems:

1. The viewfinder is pulled out and "PRIORITY" is set to "FINDER".

Push the viewfinder back in or set "PRIORITY" to "LCD".

2. The LCD monitor's brightness setting is too dark.

Adjust the brightness of the LCD monitor.

3. If the monitor is tilted upward 180 degrees, open the monitor fully.

Download the manual for more info:
JVC GR D290 Manual

Jan 19, 2014 | JVC GR-D290 Mini DV Digital Camcorder

1 Answer

Monitor screen is like in sleep mode. It has power, but it won't show anything.


candlelig840, Your "cold-cathode-fluorescent-lamp" back-lit lcd monitor may not be in sleep-mode!! However, it may be in "black screen" or "Blank n Black screen" mode. Spend an hour doing some reading in my fixya profile and read testimonials and follow the web links. Your monitor isn't any different than any other brand in it's basic design and operation!!! Again, read my and other LCD monitor tech's ("budmrtn" , "buddymc" ) for information on doing your own repair or to find out all your options you have when dealing with CCFL back-lit LCD panel that is now black and lifeless!! If you live in or near a large (>2 million) city, give a call to local TV/lcd repair shop and question them about black screen and what is the top cause of lcd monitor/ lcd tv black screen failures. If you need further assistance after you research your monitor's problem do another comment here on fixya and we will be glad to help you. Do not rate this response. If you do, you will break the link and not have option to do further comments back to this posting. 12fixlouie

Mar 03, 2010 | LG Flatron L1715S 17" LCD Monitor

2 Answers

No display powershot a75


Did you get a solution to your problem? I am experiencing the exact same thing with my A75. Still takes pictures and displays them for the 2 second preview, then back to black. And they download fine, too. But I get the same black screen in every mode except stitch assist and movie mode. Thanks.

Jun 06, 2009 | Canon PowerShot A75 Digital Camera

1 Answer

Sharp light turns green thern turns yellow screen goes black


it is going into sleep mode, good luck with this.... i am currently asking how to get my hard drive to quite putting my monitor into sleep mode.

although it hasn't worked for me because my screen stays black, one of the options given to me is to try to start in safe mode and then adjust your settings to "never" on the energy/sleep/hibernate mode

some one else suggested that i remove and reseat the video card

hopefully one of those will work for you

Feb 14, 2009 | Sharp LL 172A-B 17" LCD Monitor

1 Answer

Dell172fpb 17" monitor


Self-Test Feature Check (STFC) Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:
  1. Turn off both your computer and the monitor.
  2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove Analog (blue connector) cables from the back of computer.
  3. Turn on the monitor. The floating 'Dell - self-test Feature Check' dialog box should appear on-screen (against a black background) if the monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains green and the self-test pattern will scroll through the screen continually.
  4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check your video controller and computer system; your monitor is functioning properly.

Thanks
proton

Oct 26, 2008 | Dell E171FPb 17" Flat Panel LCD Monitor

2 Answers

A85 LCD stays off in all modes except "stitch"


Hi Toonz
I have exactly the same problem as Shimoni and Antonio with my 4 years old A85.
But sorry, its not a problem of the CCD, cause we all get a clear actual picture on the LCD but just in stitch mode! In any other shooting or playback mode the LCD is dark. So the sensor must be working well and Canon Germany doesnt repair for free. Our failure is different and we have to pay much more than the camera is worth ;-((
Dieter, Munich

Aug 28, 2008 | Canon PowerShot A85 Digital Camera

2 Answers

LCD screen is black except in stitch assist mode.


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

May 13, 2008 | Canon PowerShot A75 Digital Camera

1 Answer

Monitor Message = "No Signal"


see i use Compaq too
they don't generally except other modes

did u try that monitor with other pc where it worked

u should install proper monitor software ... u will found it from the cd given wit Ur monitor


Apr 24, 2008 | Mag Innovision lt456s 14" Flat Panel LCD...

3 Answers

My monitor will remain black when notebook is powered up


test it with another monitor if you things then maybe the LCD has a fault.  Come back here for more instructions

Oct 15, 2007 | Acer Aspire 5100 Notebook

Not finding what you are looking for?
Canon PowerShot A75 Digital Camera Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

165 Answers

old marine
old marine

Level 3 Expert

1814 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...