Question about Polaroid i832 Digital Camera

1 Answer

Camera lens r out and not getting in..the red light is blinking but camera not getting on..plz help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful.

Regards
Andrea

Posted on Sep 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Light blinking after LCD screen replacement


Go to Kodak site and find out the significance of the blinks and you will be guided accordingly.

Sep 03, 2017 | Kodak EasyShare M863 Digital Camera

1 Answer

Lens stuck on zoom, and rattle


sure your machine has been exposed to sand and moisture, so this all stuck and short circuit, take it to a technician but I would advise discard

Aug 04, 2012 | Kodak EASYSHARE M340 Digital Camera

1 Answer

On myC643, the lense will not retract, green light blinks on/off then the red light blinks several times.


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Nov 25, 2010 | Kodak Cameras

1 Answer

I dropped my camera and it won't turn on!


OoW repair: 48,44 pounds
Alternative Trade up: Where you trade your old camera to a new camera for 25-30% less than market price.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Nov 01, 2009 | Kodak Easyshare 1725043 M893Is Digital...

1 Answer

Focus error


Very common Fuji lens problems. Find a good independent repair shop that may be able to fix. Fuji will charge a huge sum to replace lens.

Jul 01, 2009 | Fuji FinePix S7000 Digital Camera

1 Answer

Access light is blinking.


We have a D40X and had a similar problem! 
What I did was pretty much reset everything! Take the batteries out, reset to factory settings and reinsert media card. I'm sure the other users did not do permanent damage and it may just be attempting to process corrupt data.
Hope you are taking pix again SOON!

Dec 03, 2008 | Nikon D40 Digital Camera with G-II 18-55mm...

1 Answer

Kodak easyshare c533 lens is stuck


after 4 seconds view screen pic melts and goes blurry

Oct 19, 2008 | Kodak EasyShare C533 Digital Camera

1 Answer

Flash not working


i think your problem is that you are not flipping open the flash... the flash doesnt automatically flip open... and the blinking red icon in the lower left just means that since there isnt enough light, the camera will spend a bit longer to allow more light to enter the lens, hence you need to keep the camera steady and not shake it... hope this helped

May 20, 2008 | Canon PowerShot S5 IS Digital Camera

2 Answers

Problem in lens opening


Dear sir
I purchased Kodak EasyShare Digital Camera (5.5 mega pixcel)last year. but now i am facing lens opening problem in my camera.
When we on the camera the green light is blinking but when lens trying to open its became dead.(no red signal)
but i can able to review photos no problem in reviewing.
No problem in battery i tryed all kind of battery but same problem.
Pls. suggest how to slove & if possible pls give the address of authoried kodak service center in pune

Aug 28, 2007 | Kodak EasyShare C330 Digital Camera

Not finding what you are looking for?
Polaroid i832 Digital Camera Logo

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Cameras Experts

kakima

Level 3 Expert

102366 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Are you a Polaroid Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...