Question about Canon PowerShot SD600 Digital Camera

1 Answer

I just got a new hp laptop with windows 7. i loaded the software for the camera successfully and the driver for the camera. when i connect the camera to the computer with the usb cord, the camera is not opeing the eos utility and i don't think it is recognizing hte connection. do i need to do anything else to set up the connection?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Canon Master
  • 102,366 Answers

Consider NOT using the USB connection.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use Canon ZoomBrowser or any other photo cataloging program.

Posted on Apr 06, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Audio drivers foe windows 7 for compaq/hp M2225 AP LAPTOP ?


1.. Make sure you are connected to the internet.
2.. go to this website.. http://www.hp.com, go to support and click on the Download drivers.
3.. locate your product and download the appropriate driver.
4.. Install it and restart your pc..

Apr 09, 2014 | Computers & Internet

1 Answer

Windows 7 installation disc doesn't see SATA hard drive


If your motherboard's BIOS is properly configured for SATA controllers and you burned the Windows 7 RC1 ISO image correctly, Windows 7 should recognise and install on a SATA drive without any third-party drivers. Consult your motherboard's User's Guide for assistance in setting up the BIOS properly.

In case Still Having Problem Then Follow Us For Computer Support For On : Computer Support

Feb 06, 2014 | HP Pavilion dv6130us Notebook

1 Answer

For a HP dv7-6135dx laptop, the integrated webcam and microphone have stopped working. Is there a way to repair the laptop? Out of warranty.


what OS , no OS state, is this dead XP, ?
or WINDOWS 7??????
LEARN THAT DRIVERS MUST MATCH
Both the PC (exactly) and the OS loaded.
here are the w7 drivers, load them.

click multi-media here. see that cyberlink, cam

https://support.hp.com/us-en/drivers/selfservice/hp-pavilion-dv7-6100-entertainment-notebook-pc-series/5082216/model/5118973


looks like support is until 2021... good news for you.
what I'd do is back all those drivers up so you dont need to find them when they get corrupted.

did you install W10 in this box.
yes, bingo 2.... lots of things dead. oops.

Aug 11, 2017 | HP Webcam

1 Answer

Hp G42-415x running window ultimate 7 need hp webcam software to install to make the built in camera to work. Please help I format the hard drive and there is no recovery disk so I reinstall new vers


415DX (corrected) windows 7 32bit or 64?
first off there are only 3 ways (besides 2 day google searches and gettng infected 10 time)
what are the, in order. of easy and safe.
step are you connected to the internet.? yes/no..
if no ,there will be now drivers...
i see you formatted the HDD. that kills dead the free windows from HP doing that. its gone now.
so what w7 disk is that FROM WHOM? MS?, hacker? whom?
media used matters.
  1. go to Device manager and see if cam is there, click update.
  2. go to HP, see link below, get the drivers you deleted.
  3. run scan tools to learn what camera is there and get driver from the maker of cam. ask.


what you need is the HP driver.
load all these, cept BIOS.

i guessed 64bit

this is your support page, get them while still there (be savvy)

https://support.hp.com/us-en/drivers/selfservice/hp-g42-400-notebook-pc-series/4346229/model/5048622

Jul 26, 2017 | HEWLETT-PACKARD G42-415DX Laptop

1 Answer

After getting Windows 7 I can't use the scanner button on my F340 aqll in one and I can't figureout the scanner feature on Windows 7


It sounds like you installed the generic OS driver from Windows 7. This driver only works for the printer. (Alternatively, you do not have the monitor program running or the destinations set in the HP software.)

If you plugged in the data cable before installing the HP software, uninstall the printer (Devices and Printers) then disconnect the data cable (USB). Go to http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=1128309& and select your Win7 version (32- or 64-bit). Then click Next. Expand the section marked driver and download the Full Software. Install the software. Connect the data cable when prompted to do so. (Try a new USB cable since scanning requires bi-directional communication with the printer and can fail when the printer works). Avoid using a USB hub or print server.

If you do have the HP software installed, check that the monitor program is running (Start > Control Panel > System and Security > Adminstrative Tools > Component Services > Services.) The line for the HP monitor should say started. You may need to download and install the patches or the diagnostic utility from the above site to find a specific problem with the Win7 installation.

Next launch the HP software and attempt to scan from the computer. Next use the settings that give good results to program the defaults for the scan destination buttons. Now try to use the scan buttons on the all-in-one.

Once you have the HP drivers for both the printer and the scanner installed, the Windows 7 Fax and Scan and Paint programs should let you successfully scan from the computer. (New scan for fax and scan. File > Import from Camera or Scanner > New Scan for Paint.)

I hope this helps.

Cindy Wells

Apr 24, 2011 | HP Deskjet F340 All-In-One Printer

1 Answer

I have a HP 5550 SCANNER.And i bought a hp laptop with windows 7. but the scanner doesnt support windows 7. what can i do??


The basic driver for Vista may work. http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=77362&lang=en&cc=us&taskId=135&prodTypeId=15179&prodSeriesId=77360 (select the appropriate version 32-bit or 64-bit)

Alternatively, try connecting the scanner to the computer and loading a generic WIA driver from the OS.

In either case, if they work, you will not be able to use the buttons on the scanner to launch scans. Instead use Windows Fax and Scan (New Scan) or Paint (File > Import from Camera or Scanner) to acquire scans. (You can also acquire scans in Photo Gallery if you download and install that software from Microsoft. Alternatively, you can buy a third-party software for scanning and OCR.)

I hope this helps.

Cindy Wells
(I've gotten other older scanners to work with basic drivers; it's worth the shot even without the full-featured software.)

Jul 29, 2010 | HP ScanJet 5550c Flatbed Scanner

1 Answer

Hp laptop show web camera for windows 7


Go here and go to Page 1 of the comments thread. You will find every driver you need for hp dv2000 running Windows 7, both 32 and 64 bit.

http://h30434.www3.hp.com/t5/Operating-systems-and-software/Windows-7-Upgrade-Guide-for-dv2000-models/td-p/186936/page/8

Enjoy...you need to Download the "Cyberlink YouCam" software.

Jul 13, 2010 | HP Pavilion dv2000t 14.1" Notebook Laptop...

1 Answer

I can't get the driver software to work on my computer and it won't recognize the camera. I'm runnning a newer HP laptop top with Windows 7.


Older versions of Kojak's EasyShare software do not support the Windows 7 operating system, but Kodak's new version 8 does. You probably just need to download/install the new software at www.kodak.com

Dec 31, 2009 | Kodak EasyShare C913 Digital Camera

1 Answer

My wife has a Premiere Microscope Digital Camera, Model MA88, purchased in 2007. Her old laptop computer died on the 23 December 2009, necessitating purchase of a new laptop computer which had Microsoft...


Turn back to XP or buy one of those $150 mini laptops (netbooks) that run on XP like the acer aspire one, dell mini 9 or the hp onenote, and load the software for it there.

Dec 25, 2009 | Premiere Microscopes Science & Laboratory

Not finding what you are looking for?
Canon PowerShot SD600 Digital Camera Logo

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

169 Answers

old marine
old marine

Level 3 Expert

1978 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...