No disk for the printer - Office Equipment & Supplies

Go To Below official HP Printer Page For Your problem, HP Color LaserJet Enterprise 500 M551N Printer Error Codes and Support Hope It's resolve all Your Printer Problem,
Or Still having Problem Then follow Us For HP Support

Follow the procedure :-
Printer printing in different language 

1. Go to the Start Menu
2. Go to Printers and Faxes
3. Right Click on the printer
4. Go to Properties
5. Select the Advanced Tab
6. Click on New Driver
7. The add printer Driver Wizard will come up
8. Click next
9. Click on have Disk
10. Click on browse to locate the disk 
11. Cliclk OK
12. Reinstall driver from the English folder in the printer disk. (you will need the printer disk)

Thanks for using Fixya.

The installation disk is called Software and Driver Disk, and will report printer model.

If you do not have the disk, you can to download the software from one of the following locations:

Official Canon Drivers and Software

Canon USA:DRIVER & DOWNLOADS

After downloading is finished, unplug the printer USB and run the software that you downloaded.
The software installer will tell you when to connect USB.

Fiend your solution direct from Lexmark. Here is your solution



http://www.lexmark.com/printer/prob676ijt65/solution

To all Lexmark owners with the lost disk problem.

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

• Unplug printer USB.
• Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
• Download driver from website, or use the disk and run the install file.
  
• Follow driver installation wizard.
• Plug back printer when prompted from installation wizard.

If you instead want to purchase a new disk, bear in mind that Lexmark does not distribute replacement install disk for all models.

Contact Lexmark here, to see if the disk for your printer is available.


Note:some printerdoes not work on Vista, if you do not find any driver download for Vista on your model page, that means your model is not Vista compatible.

printer did work with computer before it crashed.

I need help installing the X6170 Lexmark without the disk

try this link for those drivers

NV RAM and HD
To initialize NVRAM
1. Remove any installed accessories (for example, a stapler/stacker).
2. Turn the printer off.
3. Hold down the DOWN ARROW ( ) button, and then turn the printer on. Continue holding
down the DOWN ARROW ( ) button until all three printer control-panel lights flash once and
then remain on. This might take up to 10 seconds.
4. Press the UP ARROW ( ) button.
5. Press the PAUSE/RESUME button. The display should show SKIP DISK LOAD.
6. Press the UP ARROW ( ) button until NVRAM INIT is highlighted.
7. Press the SELECT ( ) button. The printer initializes NVRAM and then continues its poweron
sequence.
Hard-disk initialization
CAUTION A hard-disk initialization erases and reformats the printer hard disk. Perform a hard-disk
initialization only if an error code on the control panel indicates an EIO disk error. Always try
initializing the hard disk before replacing it.
NOTE Before performing a hard-disk initialization, print a menu map and a configuration page (see
Menu map and Configuration page). Use the information on the configuration page to reset
any customer-set printer configuration values that the hard-disk initialization procedure
changes.
To initialize the hard disk
1. Turn the printer off.
2. Hold down the PAUSE/RESUME button, and then turn the printer on. Continue holding down
the PAUSE/RESUME button until all three printer control-panel lights flash once and then
remain on. This might take up to 10 seconds.
3. Press the BACK ARROW ( ) button. The display should show INITIALIZE DISK.
4. Press the SELECT ( ) button. The printer initializes the hard disk and continues its power

I have misplaced my installation disk for Lexmark/Z600...Model #4126-K03. Can I download it from internet??????
thanks/fish