Question about Office Equipment & Supplies

3 Answers

Code will not open safe and key will not turn fully

Posted by on

  • 6 more comments 
  • drdermotraft Sep 06, 2010

    Lexsor electronic safe. It is not a fax machine but a home safe

  • drdermotraft Sep 06, 2010

    It is not a fax machine but a safe.

  • drdermotraft Sep 06, 2010

    I have a home safe made by Lexsor. It is an electronic safe. My code will not open the safe, it has stopped working. The back up key will not open it either. Is there some code I key in to allow key to open safe manually ?

  • drdermotraft Sep 06, 2010

    I do not have a problem with a fax machine, I have a xlesor electronic safe that will not open with either a key or code

  • drdermotraft Sep 06, 2010

    thank you but there is an error in my request . I do not have a problem with a a fax but with a lexsor electronic safe that will not open

  • drdermotraft Sep 06, 2010

    thank you that was most helpful

  • drdermotraft Sep 06, 2010

    device is a safe ,not a fax machine. It is an electronic safe made by Luxsor . The key pad code will not work and the manual key will not work. I think there is a code that needs to be inserted before the manual key works. Can you help?

  • drdermotraft Sep 06, 2010

    Sorry lyzmorato the safe is made by Lexsor not Luxsor

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

Hi.

I did not know that Lexsor was manufacturing safes, I thought that they produced mainly stereos and TVs.

When a safe does not respond to the code and does not open with keys, standard procedure is:

Calling Manufacturer special safe support.
Getting the emergency code calculated on safe part number.
Getting a technician at home to open the safe if that does not work.

Unfortunately Lexsor is a China based manufacturer that does not offer much support.

The only alternatives are dropping them an email, or getting support through the retailer (eg. Dixons).

Here the contacts:

enquiries@lexsor.com

Dixons: www.dixons.co.uk
Pcworld: www.pcworld.co.uk
Currys: www.currys.co.uk


State the situation and ask for a release code if available. If there is no important good or document inside the safe you can arrange repair or replacement with the retailer. If support given is insufficient, then the only choice is the blacksmith.

If for some reason the save must be replaced, I suggest getting a product from a manufactured specialized in production of safes.

Best regards.

Ginko.

Posted on Sep 06, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,566 Answers

Can you tell me the model of your device?

Posted on Sep 05, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 503 Answers

Hi,

Remove the beige cover where the paper comes out and close the gray door. Please post your feedback and Vote if the problem resolved as per your satisfaction.

Posted on Sep 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have key and code...safe will not open


Sentry Safe not unlocking - YouTube

? 0:36
https://www.youtube.com/watch?v=4mbtSUAoS6w
May 8, 2013 - Uploaded by 1diazsantana1
When i put the pass-code on my Sentry Safe the handle will remain locked and I ... mine dont want to open either! i get 5 beeps ... How To: Open A Locked Sentry Safe If You ForgotCombination Code Or Lossed Key Model Is ...

Opening a Sentry Safe with a Rubber Mallet, some WD-40 ...

idoneitmyself.com/.../opening-a-sentry-safe-with-a-rubber-mallet-some-...
May 7, 2010 - Since this safe can only be opened with an electronic code, this is a .....i have sentry V260 electronic with key, no handle. cant find key and ...

Jan 05, 2016 | Sentry Safe Fire-Safe .8 Cubic Ft....

1 Answer

My safe, a Cathedral EA15 Will not lock. Any suggestions people?



Instructions
  1. 1

    Enter your code on the keypad located on the front of the safe. Some electronic digital safes require you to input a special character like "#" before and after your code. The safe should either beep, have a LED turn green, or display "OPEN" if you have correctly entered the code.

  2. 2

    Turn the handle to the right within five seconds of correctly entering the code. If you wait too long, the safe will lock and you will have to enter your code ag

3

Open the safe with a key. Use your emergency key that came with the safe to open it if you forgot the code or if the batteries have died. Remove the key cover from either the handle or the control panel to reveal the lock.

  1. 1

    Enter your code to open the safe.

  2. 2

    Place the electronic digital safe into code reset mode. On some models you need to hold the last digit of the code or press the "*" button to get into code reset mode. Other safes require you to open them and press a small red button on the inside of the door.

  3. 3

    Enter your new code on the keypad and press "#" to finish. Some safes may require you to press "*" or a letter to finish the code. If the safe requires it, enter the new code again to confirm that you entered it correctly.

  1. 1

    Use your code to open the electronic digital safe's door.

  2. 2

    Locate and remove the battery cover on the inside of the door.

  3. 3

    Replace the used batteries with new ones. For most safes, this will require two or four AA batteries.

  4. 4

    Test the batteries. Use your code while the door is open to test the batteries before closing the safe.

Feb 08, 2015 | Locks & Locksmithing

1 Answer

I have a round key for my safe and it will not open the safe this is the first time it has been locked.


You have to first fully seat the key into the safe, then push down on the top of the safe, then turn the key. It should work, my brother has one and that is how he has to open it.

Jan 26, 2011 | Sentry Fireproof Safe

4 Answers

How to unlock a cathedral electronic safe ea25


After opening the electronic safe (with the pre-set factory code of 159B) locate the small red button on the
inside of the door near the hinge.

2. Press the red button and then release it, you will hear a beep. DO NOT SHUT THE DOOR UNTIL YOU HAVE CONFIRMED THAT YOUR NEW SECURITY CODE HAS BEEN ENTERED CORRECTLY.
3. With the door open, enter your own personal security code, which can be 3- 8 digits long, and confirm your new code by pressing the letter “B” on the electronic touch pad. Before you close the door, try the new security code to make sure the lock release the knob so you can turn it and retract the live action locking bolts.
If the code fails, go through steps 1-3 again. If the code works successfully, then you should lock the safe. When you open the safe in the future enter the security code you have set followed by the letter “B” and turn the knob.

If the incorrect security code is entered 3 times you will have an automatic lockout for 20 seconds before you can try your code again. If the incorrect security code is entered 3 additional times there will be a 5- minute lockout before the code can be tried again.

BATTERY REPLACEMENT
This safe uses 4- AA batteries. Under normal use, batteries will last about 1 year. When the battery is low, a red light will come on warning you that the battery is low. To test the batteries, enter your security code. If the batteries are low the red light located in the middle of the top of the keypad will start to flash.

To replace the batteries, open the safe door with your security code and turn the knob. Push the batteries cover plate, which is located on the back of the door, and replace the old batteries.

YOU MUST PROGRAME YOUR SECURITY CODE AFTER YOU REPLACE THE BATTERIES. SEE STEPS 1- 3 UNDER “ENTERING YOUR SECURITY CODE”.
TROUBLE KEY
A “Trouble key” has been provided in case you forget or lose your security code. Remove the small central panel from the front of the faceplate. Insert the key and turn it counter clockwise. Then turn the knob on the door towards the right. This will manually open your safe. If you lose your key, you may purchase a replacement key by referencing the serial number located under the central panel by the lock.
MAINTENANCE FOR KEY AND ELECTRONIC SAFE
If the door of the safe starts to rub on the door frame, open the door per the instructions above. By the door hinges you will find a threaded stem. Use an Allen wrench to tighten the threaded stem. This will help realign the door and give you trouble free access to the contents of your safe.

Nov 01, 2009 | Home Security

1 Answer

Lost key to sandleford es20 safe typed in code will not open


149 then A key
or try 149 and B key

these codes can be turned off tho if i remember in the manual...

if it works open dor... press down red button located inside the thick door kinsid the unit.. it beeps.. type new code and A

test to see if it works.

oh and throw it away


Jul 12, 2009 | Sentry Fireproof Safe

2 Answers

I cannot open safe with the usual code.Safeguard electronic digit


To open a Safe International Digital Electronic Safe

User override key to open safe

Then:

a. Inside the open door you would find hidden a red button press this button, the yellow light will be on, input the user code in 30 seconds try 1,5,9 then press A or B to finish

b. If the yellow light keeps flashing with beeps the code is wrong( revere to user manual)

c. To change code repeat step a.

Test your new code before closing safe.

Apr 27, 2009 | Safe International Digital Electronic Safe...

3 Answers

Factory code will not open model # DA3831 safe


i am a locksmith that has worked on several of these. The safe is manufactuered with three types of lock mechanisms 1. combo dial 2. digital 3. advanced digital the advanced digital is what you have there are no green lights on it. look at the manual carefully there are 2 seperate sections on the digital key pads yours will be the second.

Nov 23, 2008 | Sentry Fireproof Safe

7 Answers

Bunker hill safe


i had the same problem this is what i did. i took the lil leg off the bottem it held on by a srew take a cloths hanger put it in the hole and now u can hit the lil button that is for makin a new code it is on the hing side of the door the yellow light will come on and stay on now put ur new code in then hit a or b i used 1111a then changed it once i got in o by the way ''the factory code is 159a try this first" and the cloths hanger i shoved a ear plug on the end of it so that way it could grip the button hope this helps somebody

Sep 20, 2008 | Check Point Network Adapter

1 Answer

My sentry safe will not open after entering the code it reads "err"


You have to press the program / enter button after you enter the code How to open electronic sentry safes.
Locksmith opening instructions manual for sentry fireproof electronic security safes. Insert the tubular sentry key into the lock to the left of the key pad. Turn the key all the way to the right until the plunger pops out. Press the five-digit factory code. The green Proceed light will come on. Pull the handle down; to crack the sentry door open

Aug 10, 2008 | Sentry Fireproof Safe

2 Answers

How to open my safe with the code


How to open electronic sentry safes.

Locksmith opening instructions manual for sentry fireproof electronic security safes. Insert the tubular sentry key into the lock to the left of the key pad. Turn the key all the way to the right until the plunger pops out. Press the five-digit factory code. The green Proceed light will come on. Pull the handle down; to crack the sentry door open

Apr 18, 2008 | Sentry Fireproof Safe

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...