I don't know what's my password for my routeur Netgear WNB1100, please help me!!!

1. username should be admin and the password is password

default password is password

Looking for the NETGEAR WNR1000 default password?

You probably have little reason to access your router on a regular basis so don't feel too bad

f you've forgotten the WNR1000 default password.

However, when you're troubleshooting a network problem and need to get in to the device,

the WNR1000 default password suddenly becomes very important.

For most versions of the NETGEAR WNR1000, the default password is password. As with most passwords,

the WNR1000 default password is case sensitive

Be sure to change the default router password on your WNR1000 to something more secure as soon as you're in.

Then use a free password manager so you'll never forget your new WNR1000 password

hope this helps

Looking for the NETGEAR WNR1000 default password?

You probably have little reason to access your router on a regular basis so don't feel too bad

f you've forgotten the WNR1000 default password.

However, when you're troubleshooting a network problem and need to get in to the device,

the WNR1000 default password suddenly becomes very important.

For most versions of the NETGEAR WNR1000, the default password is password. As with most passwords,

the WNR1000 default password is case sensitive

Be sure to change the default router password on your WNR1000 to something more secure as soon as you're in.

Then use a free password manager so you'll never forget your new WNR1000 password
hope this helps

your wifi router has ssid and password. try to look the settings inside your router and go to wireless security settings.

If you can't remember your password your only option is to factory reset the router and reconfigure it.

There is a button on the router, it's recessed and will need to be pushed using a paperclip or something small. Push and hold this button for 30 seconds to reset the router to factory settings.

After this you will need to reconfigure the router and set up the new security/password.

This can help you out:

http://www.columbia.edu/acis/networks/aptnet/netgear/index.html

I hope this helps! If this did help you, please give a thumbs up!

Thank you for choosing FixYa!

I suggest you RESET the Netgear back to the defaults and configure the wireless settings (ie the encryption password etc.)
To RESET the Netgear, power up the Netgear then press andhold the RESET button at the back of the router until all the LEDs flash. Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = password You can now change the admin password and configure thewireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.

To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

There is a great article at Working with Windows Wireless Networks
If you need more help post back! Thumbs and testimonial are welcome!

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

Refer the below link to reset the password of netgear

http://tinyurl.com/netgear13

tu dit que vous n'avez pas d'access a votre routeur? peut etre l'address etait changez, avez-vous essayé de faire un reset?

To ilysurita, cj_mom, top_shutta…
First can I clarify what is meant by a ‘lost password’ …. The original poster here is asking about the password needed to login to the router configuration pages.

If you know the password to login to the router configuration pages, you can still get access to the network key (also known as passphrase, WPA or WEP key, PSK, pre-shared key) – which is the key Windows asks for to connect a new computer to the network. It will be found under a heading like ‘Wireless Security’ or ‘Wireless Settings’ within the router configuration pages. For this model, you can find the router configuration pages by typing www.routerlogin.net (or .com) into a web browser, or http://192.168.0.1

If you don’t know the username/password to login to your router, try using the defaults – for this model, they are admin and password.

However, if the router login username/password has been forgotten, the only way to regain access to the router configuration settings is to reset the router, as described in my posting above. I don’t know of any shortcuts to this one. :(

If you have to resort to this, you might want to wait for whoever set up the router to help with this. This is because resetting the router will remove all your settings – password, network key, ISP connection info – so you will lose your internet connection altogether until it is set up again.

On the other hand, if you’re willing to spend some time and patience, you can have a go yourself.

If you have your original setup CD this may contain a software wizard to walk you through it. If not, you might be able to download a setup wizard from the router manufacturer’s website, along with a quick installation guide (and a manual).

The Netgear site also has very clear troubleshooting and support pages which will help with setup, even if you don’t have any setup software:
http://kbserver.netgear.com/products/wgr614v9.asp

Make sure you use a wired connection. Also, print off all the information you need before you begin, as you will not be able to access the internet while you are setting up the router.
Good luck whatever you decide to do