Question about Computers & Internet

1 Answer

Otiplex 760 will power up breifly and shut off as if the thing was unplugged , sometimes will stay running for a few minutes and sometimes will shut off immediatly. I cleaned the old heat element compound off and added new silver compound thinking this would take care of problem , problem did not change..

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 100 Answers

1. Try blowing the dust on the motherboard, if any hard dust is present, use soft brush to clear it.
2. Again remove the Heatsink on the processor, completely clear the compound using soft cloth, There should not be any hard particles or dust left, apply heat sink compound on both the heat sink side and on the processor, put back the heat sink and fan.
3. Check whether the power button on the cabinet is not struck and functioning if possible try to replace the button.
4. Blow the dust even from SMPS or try with another if handy.

Posted on Sep 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Whirlpool Super Capacity 465 and am having issues with the following. Sometimes while baking, the oven turns off and the power to the appliance stays on, sometimes everything shuts off and PF


PF stands for power failure you are loosing incoming power power check the terminal block the control will do goofey thing with loss of voltage rule of thumb no more than a 10% voltage loss 108VAC minuim

Aug 04, 2014 | Whirlpool Ovens

1 Answer

Dell otiplex 760 does not boot


it may due to recent update or changes in driver of the computer. go into safe mode then restore your computer to a week after or virus infection may also cause that

Mar 05, 2012 | Dell OptiPlex 760 MT Desktop Computer

1 Answer

Samsung HLN507W turns on for about one minute then shuts off, three blinking lights stay on in front. It is not the lamp, nor the blue lamp cover switch for sure. I unplug it and immediately turn it on. ...


Samsung HLN507W turns on for about one minute then shuts off, three blinking lights stay on in front. It is not the lamp, nor the blue lamp cover switch for sure. I unplug it and immediately turn it on. It always does the same thing: comes on for 1 minute, then powers down - there is no wait time in between unplugging and powering on. All fans seem to work and I cleaned the dust out of it. Help.

Nov 04, 2010 | Samsung HLN507 50" Rear Projection...

1 Answer

Multisync LCD 1700V turns on then screen goes blank and shuts off


Does the power light stay on? If so, you have an inverter problem. If the power light goes off, you have a power supply problem.

Sep 02, 2009 | NEC MultiSync LCD1700V 17" Flat Panel LCD...

1 Answer

Emachine Monitor comes on a few minutes and cuts back off


I have the same problem and I think its the circuit board on the power on button and blue led. I unplug the board when the monitor is on and then the monitor stays on and works OK.
It don't make any sence it is only 3 parts switch led connector
anybody else run into the problem

Mar 29, 2009 | E-Machines eMachines Monitor E15T4

1 Answer

Wii shutting down


If you are having to unplug the power supply then your powersupply is faulting out. Try a new location to plug it in and see if that fixes it. If so have the voltage checked at the outlet on your wall. If this doesn't fix it replace the power supply. LMK if you need one and I can help you with getting one at a discounted price.

Sep 09, 2008 | Nintendo Wii Console

1 Answer

Tv powers on, but turns off after a few min


somone with some sort of tv knowledge told me that sometimes people dont realize t but moisture builds up inside and it needs to be dried back out

Jan 28, 2008 | Televison & Video

1 Answer

Automatically powers off, flashing red LED


try removing one neck board at a time and see if it stays on and longer,don;t let the board touch any metal or a short wil follow and you got problems.try the red first,

Sep 03, 2007 | Toshiba 43H70 43" Rear Projection...

3 Answers

Magellan GPS Roadmate 760


Are you willing to part with it, I may be able to use it for parts denisdsouza@hotmail.com

Aug 05, 2007 | Magellan RoadMate 700 GPS Receiver

1 Answer

Tv power intermittant


As computer controlled as TV's are it is a good thing first to unplug the set for 2 minutes then trying operation again.

Feb 03, 2007 | Hitachi 35UX70B 35" TV

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...