Question about Fisher and Paykel Washing Machines

Open Question

I have a Fisher & Paykel Gentle Annie GW52 washing machine and am trying to get the manual. The machine stopped on the final spin and the drum will not move or agitate. I believe it may be a shear pin but i need a manual to try to ID the area and part

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 57 Answers

SOURCE: I have a Fisher and Paykel ECS Gentle Annie GW52-k

Make sure there is voltage going to the valve solenoids. That is what opens up and lets water into the washer. You will have to open up the top of the washer control. The valve assembly is where the hoses screw in the back. I don't have the technical on it but most likely should be 120V. Sometimes the valve goes bad and won't open up.

Posted on Feb 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model gw 712. Why are lights 3, 5, 7, and 8 flashing?


Hotpoint, GE, RCA Washer Repair - Does not spin or drain ...

? 6:13
https://www.youtube.com/watch?v=69az-ZA3eSQ
Jul 10, 2013 - Uploaded by ApplianceVideo.com
Hotpoint, GE, RCA Washer Repair - Does not spin or drain - VWSR4150DAWW ... Fisher & Paykel ... my washer won't drainnor spin. what is the problem? .... But in the end, this video helped me fix our washing machine.

How to repair a Fisher Paykel Washing Machine

www.instructables.com/.../How-to-repair-a-Fisher-Paykel-W...

InstructablesHow do I remove the lid on a F&P intuitive eco washing machine to get to the motor panel?? IMadeIt ... It runs until the spin cycle and it drains but won't spin.

Dec 18, 2015 | Fisher and Paykel Washing Machines

1 Answer

It was on the last cycle spin it stopped had pumped the water out but stopped spinning.


Expert Tips, Troubleshooting & FAQs - Fisher & Paykel ...

https://www.fisherpaykel.com/us/support/expert-tips/Fisher & PaykelFind Tips, Troubleshooting Information, How-tos, FAQs and Answers to Commonly Asked Questions about Fisher & Paykel Appliances.
also on Youtube

Aug 17, 2015 | Fisher and Paykel Washing Machines

1 Answer

Gentle Annie GW52-F The cold water is just dribbling in.


Don't run hot wash only as the spin cycle will be reduced to a slower speed. Can you swap the wires and hoses to the solenoids only and try that.

Jan 16, 2013 | Fisher Paykel EcoSmart GWL15

2 Answers

My fisher & paykel 7.5 kg excellence smart drive doesn't spin


Check the out of balance switch (under the larger Grey board)
for corrosion on the terminals and replace if faulty.

9f16c24b-b2e5-47c5-96e4-cee2ec2bf2e0.jpg

Jul 03, 2012 | Fisher and Paykel Washing Machines

2 Answers

Fisher & Paykel Gentle Annie washing screeching sound


remove drive belt.check 2 see if main drive pulley turns freely.check to see if motor turns freely. could b belt. what country r u in . parts hard 2 get in australia. please reply 4 more help. please turn off power b4 u work on it. do not want any accidents.good luck

Apr 04, 2010 | Washing Machines

1 Answer

I have a Fisher and Paykel ECS Gentle Annie GW52-k


Make sure there is voltage going to the valve solenoids. That is what opens up and lets water into the washer. You will have to open up the top of the washer control. The valve assembly is where the hoses screw in the back. I don't have the technical on it but most likely should be 120V. Sometimes the valve goes bad and won't open up.

Feb 17, 2010 | Washing Machines

1 Answer

F&P ECS Gentle Annie, Frigidaire & Kelvinator model compatibility


Almost all parts are interchangeable- Gentle Annie and Frigidaire are all the same machines- only parts different are main power board in base of machine, and display board- everything else the same. Motors are interchangeable, as long as the plug connection is the same- there are two different types of plug connection (ie male and female plugs are opposite ways around).

Aug 26, 2009 | Frigidaire Washing Machines

1 Answer

Gentle annie motor wiring


This according to googled results, and somewhat verified by me:

For the Gentle Annie connect the white/orange/green wires together to from a
star point and the three other ends (red, yellow & blue) go to your 3 phase
rectifier.
You can leave the others hanging. Don't form the star point with the wire
that's green with a yellow stripe, that's the chassis earth. The brown,
purple, and brown with black stripe I think are sensing coils, with a star
point connected to the black wire. 1.4ohm each, whereas the main coils are
4.8ohm and apparently rated for 5A.

Dec 20, 2008 | Fisher and Paykel Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Owen Barnes

Level 3 Expert

867 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...