Question about AEG S72348KA ST STEEL Refrigerator

1 Answer

From time to time stops working and making a noise like boling water

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • AEG Master
  • 3,740 Answers

A refrigerator must defrost 2 - 3 times a day. It does this via the automatic defrost cycle. When the cycle starts alll motors shut off and there is a heating element that is in the evaporator / freezer section of your unit. That heating element melts the ice until the 60 Deg F bi-metal thermostat cycles and terminated the automatic defrost cycle. During the defrost cycle is is normal to hear a hissing sound as the melting ice drips on the heating element assy. Addiionally you may hear coolant gurgles as the unit shuts off to start the defrost cycle and the coolant system equalizes the internal pressures between the pressure and return lines. Again another normal sound. If your unit did not stop to defrost 2 - 3 times a day in a matter of 3 to 4 days you would have a large block of ice in the back of your freezer section and the evaporator fan blades would be hitting that ice block. The freezer would say cool yet probably no longer make ice. Also the fresh food compartment would start warming up. Hopefully this resolves your concerns. If you need more assistance just respond to this post and I will help you.

Thanks for choosing FixYa.

Kelly

Posted on Sep 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I my wedding ring out of my washing maching, it fell in there last night, on the top part between the lid and the top back part


If it fell between the bole and the housing the cover will have to be removed. if it can be turned upside down it may fall out. If it is inside the bole it may be under the agertater or or in the water pump housing.

Jul 18, 2014 | LG Washing Machines

1 Answer

Kitchen Aid Imperial 21 has loud motor noise duing wash cycle


loud motor noises during the wash cycle usually come from a water pump. Either the water pump will stop working soon, or it will keep working for a while longer, and the unit will stop cleaning. Sometimes the pump will stop making the noise for a while before it stops.

Jan 29, 2012 | KitchenAid Dishwashers

1 Answer

Horn on 2002 Gmc Sierra 1500 stopped working. Horn stated boleing fuses a couple of years ago and was just changing fuses to fix problem short term. Last time horn stopped working I changed fuse and it did...


Sounds like the horn itself is shorted out. You didn't mention if the blown fuses were a result of using the horn. A horn in construction is an electromagnet acting on a diaphram; if the electromagnet develops a short, it causes an overcurrent condition and will blow the fuse.

Jun 23, 2011 | 2002 GMC Sierra 1500

1 Answer

Keurig continuously making sound like it is filling, but keeps displaying "not ready." Making a humming sound.


hello,

what this means is that the mixer has been hook up with some particles of coffee .

what you have to do to fix up this problem is to do what is call general clean up on the coffee maker with pure bole water two to three times using it to flush the particles

thank you.

Jun 10, 2010 | Keurig B60 Coffee Maker

1 Answer

Carburators


you have got sticky floats or float velves that are sticking shut/open,,, turn on the fuel and tap the top of the carbs one at a time this may jolt the floats back and shut the needle velves if this dont work the only way to fix it is to strip the cards and clean the cards up if you park the bike up for any time again drain all the float boles first by undoing the small screw under the carb float boles or run the carbs dry by turning off the fule tap and keep the motor running till it stops by its self

Jan 15, 2010 | 2003 Suzuki GSF 1200 Bandit S

1 Answer

I have to flush three time just to get one piece of toilet paper down


the first thing to look at is to see how much water is in the system if its very low it will only give you a short flush take off the top and see how much water it is holding when full up, if its lower that the over flow pipe you could rase it a little by lifting the ball to let more water in, then have a look at the bole itself were the water comes out there are a row of holes if there blocked with lime scale you will need to clean them all out its a messy job i know but this scale will slow down the flow of water and there wont be the forse to clear the bole out, an old drill bit of the right size will easly clean the holes out, dont just try useing lime scale remover and a stiff brush as it wont get right into the holes they need to be clear right through to the water pipe from the header tank ie: about 1.5 inches so only doing the job by hand will do this
it should work ok after that
best of luck,,,with a nasty job

Dec 01, 2009 | Optics

1 Answer

Samsung SR S2028CSS Fridge Freezer - Fridge temperature problems


Try setting it to lower temperature. If that don't work the thermostat is bad.

Jun 28, 2009 | Refrigerators

1 Answer

We turn on the gas it floods over


your floats arnt working what they do is stop the gas so it wont flood the engin or over flow. what causes it is old gummy gas or just rust take the bole off and make shure they are moving free and when you put it back to gether make shure the gasket stays inplace and dosnt slide that will stop it also

Jun 04, 2009 | 2001 Yamaha V Star 1100 Classic

1 Answer

Mixer tap makes a noise like a fog horn when cold water turned on


Usually happens when the stops and not ballanced(hot and cold pressures going to the faucet). Try ajusting the stops; open more on the hot or close more on the cold. 

Feb 04, 2009 | American Standard Plumbing

1 Answer

How to clean bar 14


Cleaning the calcium carbonate accumulated inside the boiler.Put only 200 ml of water in the water tank then add a 100 grams of citric acid cristals.Do not use coffee holder and open the machine and wait the heater ready lamp .Start the pump .Collect the pumpes acidic water in a cup.When the cup is filled stop the pump and recyle the water collected in the cup to water tank.Ater repeating this recycling 2 -4 times all crystals will be dissolved and the boiler will be filled with this weak acid solution.Wait the machine closed 2 hours.Then put fresh water and run the pump and remove the solution.Now your machine is free of scales inside the boiler. You will notice less noise during boiling of water inside the boiler(not pump noise).After some usage if you notice again that high noise of water boling it is time for another cleaning.

Oct 22, 2008 | DeLonghi BAR 14 Espresso Machine

Not finding what you are looking for?
AEG S72348KA ST STEEL Refrigerator Logo

398 people viewed this question

Ask a Question

Usually answered in minutes!

Top AEG Refrigerators Experts

ashburton

Level 3 Expert

417 Answers

Ian Jones

Level 2 Expert

77 Answers

David Jewell

Level 3 Expert

454 Answers

Are you an AEG Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...