Question about iRiver T10 MP3 Player

1 Answer

No longer seen by any computer

Suddenly, none of my computers 'see' the T10. They make the 'USB connected tone', when I plug it in... But, nothing shows up in My Computer, or Explorer. I reformatted it. But, it reboots, and nothing is seen on the computers....
Any ideas?

Posted by on

  • Capt36 Jul 24, 2008

    You would hope that would work. But, it seems to be a T10 problem. I have tried to use it on several computers. The computers 'see' it in Hardware Manager..... But, nothing else happens... You do not 'see' it in 'My Computer', or any other program.... The T10 is screwed... It was a 'rebuild' on eBay..... Now, it is a 'rebroke', on my desk.....

    But, thanks for adding a reply. That may help someone else someday.....

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

For me, having upgraded Windows Media Player to version 11 caused the problem you are experiencing. Find a computer with Windows Media Player Version 10, then use iRiver's firmware update tool to install new firmware (version 1.77), then your T10 will work fine even with Media Player Version 11.

Posted on Jul 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My philips gogear vibe wont turn on


Reset your GoGear with something sharp like the tip of a pen or the end of a paper clip,

if you're device isn't working properly or there's a frozen display.


Insert the sharp object into the "Reset" hole (located at the bottom of the player), and hold it there until the device turns off.


If resetting the device does nothing to restore the display, access the "Philips Device Manager" through your computer to recover the GoGear.


Click "Start" on your computer, then "Programs," "Philips Digital Audio Player," "Aria Device Manager," and then "Philips Device Manager."


This will launch the "Philips Device Manager." Make sure the GoGear is turned off completely. Connect your GoGear to your computer while holding down the "Volume Up" button.


Continue to hold the "Volume Up" button on your GoGear, until the "Philips Device Manager" recognizes the device and enters recovery mode.


Click the "Repair" button when it appears on your computer, then folow the steps to fully recover the GoGear.


Properly disconnect your GoGear from your computer and restart the device.


Recharge your device if your GoGear dies suddenly while playing.

Connect the GoGear to your computer via the supplied USB cord.


Plug one end of the USB cord into a functional, open USB port on your computer. Plug the free, smaller end of the USB cord firmly into the small USB jack on your GoGear and turn your computer on.

This will begin the charging process of your GoGear.


If recharging doesn't work, the battery may need to be replaced.

Check that your GoGear isn't in standby mode. Hold the "Power" button for two seconds to turn it back on.


hope this helps





Oct 07, 2012 | Philips GoGear ViBE SA1VBE08K MP3 Player

1 Answer

Why when i plug the MP3 player (YP-T10) into the computer, the computer says 'One of the USB devices attached to this computer has malfunctioned, and Windows does not recognise it'?


Here are a few things you can try:
1) Plug it in to other USB ports of your PC/laptop. The port might be faulty. 2) Replace the USB cable 3) Download the latest driver from Samsung's website here:
http://www.samsung.com/my/support/detail/supportPrdDetail.do?menu=SP01&prd_mdl_cd=YP-T10AB/XME&srchword=YP-T10
Click on "Downloads"

Mar 07, 2011 | Samsung YP-T10 Digital Media Player

1 Answer

USB not connecting.


Hi there,

Well you need to install the driver/software of your player into computer, install them from the cd comes with your player. If you don't have the cd then please follow the below link to download the driver/software -

http://www.samsung.com/uk/consumer/tv-audio-video/mp3-digital-audio/yp-t10/YP-T10JAB/XEU/index.idx?pagetype=prd_detail&tab=support

(First connect your player to computer and then install the driver/software after downloading. If your computer ask to restart then restart them)

Good Luck!!

Mar 31, 2010 | Samsung YP-T10 Digital Media Player

2 Answers

I bought a new usb for my yp-t10 but its not charging it anymore


it probably has something to do w/ the mp3 player not the new charger. just call samsung and see if they can possibly do something about it.

Jan 10, 2009 | Samsung YP-T10 Digital Media Player

3 Answers

I need help deleting recorded files or songs from Samsung YP-T10


plug your Yp-t10 with the usb, and then go to the samsung media programme
and from there push the ETC next to the other icons on portable part , and list of files comes up. then press recorded files, press the file u want to delete and that's it

hope this helped

Aug 23, 2008 | Samsung YP-T10 Digital Media Player

1 Answer

Hi my yp-t10 2GB can't be switched on


There is one last ditch method, but this is most likely a hardware issue that cannot be resolved without replacement:
Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.

Apr 22, 2008 | Samsung YP-T10 Digital Media Player

1 Answer

IRiverT10 1gb


well i have an iriver t10, but i can't get any music on it...

Sep 12, 2007 | iRiver T10 MP3 Player

4 Answers

Iriver T10


Somehow the driver went missing. Click on "My Computer" and then click "view system information," then "hardware," then "device manager," then click on iRiver (it'll be there even without the driver) and then it will give you a yes/no option to look for driver software. Obviously, click "yes" but notice that you are also cued to put in a CD "if you have one." I still had the CD. It will search both the CD and online for a driver, but the computer found the driver software on the CD. Make sure you only put the CD in when cued to do so. If you don't have the CD, then contact iRiver about getting a driver download or having them send you a copy of the CD.

Mar 12, 2007 | iRiver T10 MP3 Player

7 Answers

My iriver T10 is not being detected


That happend to me and i found a solution. First go to my computer and on your left click on VIEW SYSTEM INFORMATION then go to HARDWARE now click in DEVICE MANAGER it should say T10 around there look for T10 or IRIVER T10 and click on it press in UPDATE THIS TIME ONLY or an option you like and click next then click on the RECOMENDED OPTION to install the iriver t10 after you do that a magnifying glass should appear and wait and it would install saying MTP.
If still need help send me a message at NOHEMYGIRALDO@SBCGLOBAL.NET

Nov 26, 2006 | iRiver T10 MP3 Player

Not finding what you are looking for?
iRiver T10 MP3 Player Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top iRiver MP3 & Digital Media Players Experts

kakima

Level 3 Expert

96333 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

SmartAviator
SmartAviator

Level 2 Expert

449 Answers

Are you an iRiver MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...