Question about Health & Beauty
No lcd display, even when plugged into 240vac, is it the polemer battery?
a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to an Expert (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Braun Shaver 360 Complete #8985
the 110 plugin goes into a circuit which changes AC to DC for charging the internal NiCad batteries. If there is NO charge whatsoever in the batteries, the shaver will not work. If you have any electronics background a simple test with a VOM will determine if the bridge rectifier is putting out any DC.[you must disassemble the shaver] If you have no experience on circuits take it to a repair location.
Posted on Sep 10, 2007
SOURCE: braun 6512 shaver stop working
hi i would say that you have major problem with this did you drop it sounds like a problem with the circuit contact braun or shavers uk kevin.
Posted on Dec 19, 2007
SOURCE: Braun battery replacement
Unfortunately this is almost impossible. The batteries are part of the circuit board, and Braun only authorize their service agents to replace the whole unit, and my local agent found that it had been discontinued. If you still want to have a go, two screws are hidden beneath the two grey plastic caps either side of the charging socket on the underside of the shaver which can be prized off quite easily. Once you have removed the screws, the small plastic section comes off. Now you can slide the outer casing off. A thin black cover at the back can then be unclipped, revealing the circuit board and batteries. The whole unit simply lifts out and would be easy to replace if you could find one! Rplacing the batteries would be far more difficult and risky. Good luck.
Posted on Sep 02, 2008
1) Use a small flat screw driver pry off the bottom (where the cord plugs in)
2) Remove the silver sides
3) Using a small torq driver remove the 4 scews
4) Open shaver
5) Remove circuit board with batteries
6) Install new circuit board and reassemble
Posted on Jan 07, 2009
Tips for a great answer:
Jul 05, 2014 | Braun Health & Beauty
Sep 18, 2011 | Braun Flex Integral 5550 RB Electric...
Aug 12, 2011 | Braun Health & Beauty
Aug 02, 2011 | Braun Flex Integral 5550 RB Electric...
Jan 09, 2011 | Braun Flex Integral 5550 RB Electric...
You will find the oil at shaveroutlet.com. Seelink below
Oil is applied to the foils. About a drop per week
Sep 05, 2010 | Braun Syncro 7680 Electric Shaver
Mar 24, 2009 | Braun Syncro 7526 Electric Shaver
Jun 10, 2007 | Braun Flex Integral 6520 Electric Shaver
Feb 18, 2018 | Taylor Health & Beauty
235 people viewed this question
Usually answered in minutes!