Question about Projection Televisions

1 Answer

I can receive all channels through the top box. But cant receive channell 7

Posted by on

  • muslin May 13, 2008

    my set top box is a sansui. I receive all channels except 7. On analog tv i receive all channels

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 319 Answers

Local service may not be supported by your cable/sattelite provider. Call them for advice on local channels

Posted on May 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cant seem to tune in after digital switch over not got any chanels


If your TV is an older variety that wasnt set up for digital signal you will need a set top converter box.

Jun 22, 2011 | Toshiba Projection Televisions

5 Answers

Telefunken analogue color TV model MP-A2055VT-H to connect up digital decoder set-top box. The TV only has an RF input. no other plugs. Searched all 80 channels and I cannot find an AV channel on the...


Hi,

The simplest solution would probably be the use of an RF Modulator. Feed the RF Mod with the A/V signals from the Conia CSTB12, set it to transmit on Ch 3 or 4, tune the Telefunken to either channel.

In most Telefunken TVs we have worked on, the A/V INput/OUTput would be on the SCART connectors as shown below.
9775210.jpg
To my understanding, a Conia CSTB12 as sold in Australia has a composite RCA (yellow) Video OUTput and L/R White/Red audio OUTputs. What would be needed would be a A/V signal to SCART adapter/converter.
7906648.jpg
If your Conia CSTB12 has an S-Video, then this may be used.
If your Conia CSTB12 has an HDMI, then something like this may be used.
Incidentally, should you be interested, there are comparable receivers to a Conia CSTB12 that has SCART OUTputs.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.



Sep 14, 2008 | Projection Televisions

1 Answer

The mitsubishi model vs-60805 tv will provide air channels off of cable hook-up, but does not provide cable channels. What needs to be done to recieve cable channels? The menu does not provide an apparent...


Hi,
Mitsubishi VS-60805 is 1999 model tv and unable to receive digital cable channels because it is equipped with analog tuner that can not receive cable channels because it is almost 11 years old.
You need to hook Cable Box in AV input of tv, plug digital cable in cable box and get digital cable channels in tv. Cable box has its own remote control and inbuilt digital tuner to receive all digital cable channels and widely available in Store, Radio Shake, amazon.com etc.
Let me know if you have additional question.
Thanks.


Aug 07, 2010 | Mitsubishi Projection Televisions

1 Answer

Hdtv tuner


According to RCA this set only has a digital receiver for the antenna. The cable input doesn't have a digital receiver.

Sep 22, 2009 | RCA R52WH73 Projection Television

1 Answer

Turn on goes blue then turns off


The most common reason for a TV to display a blue screen with no picture is because the source device has not been set to the proper mode.

If you are using a cable or satellite set-top box, ensure that it is turned on and set to an active station. If the set-top box is connected to the television using a coaxial cable, then the television should be set to Channel 3 or 4 to receive the signal.

If you have are using a VCR that is turned on, but not playing a tape and not tuned to a receivable channel, then a blue screen will be displayed on the TV. To resolve this, turn off the VCR or tune it to a receivable channel. If a cable or satellite set-top box is connected to the VCR using a coaxial cable, then the VCR should normally be set to Channel 3 or 4 to receive the signal.

If the blue screen is not because of a connected VCR or set-top box, the TV may require service.

Sep 22, 2009 | Sony KP-57WS500 57" Rear Projection...

1 Answer

2 AV inputs, only 1 works at a time.


hello try using a scart block at the rear good luck
shaun a5b01b4.jpg

Jul 19, 2009 | Sanyo Projection Televisions

1 Answer

Digital Channels??


Direct from the Hitachi website - "Integrated HDTV Tuners: Hitachi's new top-of-the-line XWX series features built-in ATSC terrestrial and cable HDTV tuners to provide integrated high resolution, high-definition signal decoding." You will need a seperate HDTV tuner if you do not have cable or satellite and want to watch off-air High Definition channels.

Apr 30, 2009 | Hitachi 57SWX20B 57" Rear Projection...

1 Answer

Recently installed two Philco TB100HH9 Converter boxes. Both worked well at first then both lost a major local TV station within days and cannot reprogram it into the box. Have two other TV's without a...


I just had a similar problem with this box - For the first month or two, I got the local NBC affiliate (KING-5 in Seattle) just fine on 5.1, then, after fiddling with my antenna setup, I lost it completely - NOTHING I could do would get it back. I tried a bunch of stuff - Multiple types of antenna, adding an antenna amp box, a handful of "homebrew" antennas - Nada. Yet all my other channels came in fine (although a couple were right on the edge - This box seems to need a "17" or higher on the signal strength - Some of my channels were reading in the 15-18 range, and suffering the "blockies" and sound dropout)

After hitting TVfool.com, found out that the KING digital signal is actually broadcasting on channel 48. Punched in 48.1, and there it was, clear as a bell, using nothing but a "wick" antenna (Basically, strip 4-1/4 inches of the outer braid off one end of a piece of co-ax cable, leaving the center wire alone, then plug the other end into the box) getting me a 23 signal strength. But a second or two later, the box is displaying "5.1" - Weirdness...

Reconnected a near top-of-the-line Winegard Yagi/Log-periodic antenna - VERY directional, and has some gain all by itself - and the signal jumped above 50.

Still couldn't "channel-up/channel-down" or punch in "5.1" to tune it, though - Channel 5.x was a "dead zone" as far as the box was concerned.

Re-did the "autoscan", and now, it's back to normal - I can channel-up/channel-down to it at 5.1, or I can punch it in as 5.1, or I can punch it in as 48.1, and it's all good.

So, try re-doing the auto-scan. Worked for me...


Dec 01, 2008 | Philips Projection Televisions

1 Answer

I have a centrex CTDV100 set top box that has lost all its channels. Rescanning only finds SBS channels - ie no ABC, 7, 9 or 10. I've reset to defaults and rescanned but no change.


HI

I have a remote that stopped working could I purchase yours, alternatively I could email pages from my manual so you can try to have your box work again

Lindsay

Apr 19, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...