Question about Televison & Video

1 Answer

REPLACE BOARD ON MODEL L26WD21

I WAS PUTTING MY TV ON A FLOATER STAND AND WAS GIVEN THE WRONG SIZE SCREWS AND THE SCREWS WENT THROUGH THE I GUESS IT IS THE CIRCUIT BOARD AND I AM TRYING TO FIND A NEW BOARD CAN YOU RECOMMED ANYPLACE WHERE I CAN FIND A NEW CIRCUIT BOARD

Posted by on

  • BLHAWK97 May 12, 2008

    THANKS FOR YOUR HELP. I ACTUALLY WENT TO THEIR SITE AND THERE WERE NO LISTING FOR MY MODEL. THE RCA WEB SITE ALSO HAS NO LISTING FOR MY MODEL. I DID FIND 1 SITE THAT HAS PICTURE OF THE DIFFERENT BOARDS AND I THINK IT IS THE PCB SCALER BOARD SINCE THE PICTURE ON THE SITE MATCHED WHAT I WAS LOOKING FOR BUT NO LUCK ARE PCB SCALER BOARDS INTERCHANGEABLE?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 131 Answers

The part store is the best has a world wide search.www.part store.com . The part number is located on the board itself . You could call them give them model number and ask them what boards are aviable for that tv , and take those parts and see if the numbers are on any of the board.
these board are not cheap 150 dollars to 350

thanks doctor video

Posted on May 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to know the size of screws that goes into TV stand for a Toshiba TV model number 40S51u


58 cents each mail order. Not only do they have to be right diameter and thread, also the correct length.

40S51U Toshiba Tv, 40" 1080P Led Lcd Replacement Parts

https://www.encompassparts.com/model/TBA40S51U/_/_/Toshiba/40S51U/Tv,_40
  1. Cached
Toshiba from Encompass parts & accessories. ... 40S51U Toshiba Tv, 40" 1080P Led Lcd. 40S51U Tv, 40 ... 75024004, Toshiba Screw, Stand, Mac000, 0.77.

Toshiba 40S51U Parts List - PartStore.com

https://www.partstore.com/Model/Toshiba/Toshiba/40S51U.aspx
  1. Cached
  2. Similar
List of Spare Parts for Toshiba 40S51U Parts List. 40S51U UNKNOWN ... Toshiba TV Mounting & Installation. 75024004. SCREW, STAND, MAC000. $0.58.

Toshiba TV Stand for 40S51U Complete with Neck and Screws ' eBay

www.ebay.com > ... > TV, Video & Audio Parts > TV Boards, Parts & Components
  1. Cached
TOSHIBA TV STAND FOR 40S51U COMPLETE WITH NECK AND SCREWS in Consumer Electronics, TV, Video & Home Audio, TV, Video & Audio Parts ' eBay.


Toshiba TV model number 40S51u Google Search

Nov 27, 2016 | Toshiba Televison & Video

1 Answer

I can;t find the screws for the table tv stand for my toshiba tv model:37av52r. Looked at owners manual didnt find size of screw


You may have to contact Toshiba directly for this information. This is a safety issue as the wrong screws could lead to abrupt relocation of your TV.

Dec 30, 2014 | Toshiba Televison & Video

1 Answer

Replacement stand Samsung LN S4051D 40 in LCD Television


Contact the authorized service center for Samsung. Or the authorized dealer for Samsung. They can provide you the exact size screws. If you wish to get more details, surf this link. http://electronicshelponline.blogspot.com/ There are more than two thousand and four hundred posts. All are related to television and other domestic electronic equipment service help. More than Nine and half Lakh viewers cannot be wrong. Disassambly procedure to many brand TVs are given in details. Check it out too. Pull up older posts.

May 16, 2013 | Televison & Video

4 Answers

Need Vizio E321VL TV Stand Screws


I have a M420VT Vizio TV. I used (4) M6-1.0 x 16mm screws to attach the stand to the TV stand adapter. The screws I used to attach the adapter to the TV were (3) M4-0.7x12mm. It worked out perfectly!

Feb 19, 2012 | Insignia Televison & Video

1 Answer

Hi there What size screws do I need to fit the stand to my Evotel tv - ELCD26DUSBHD. Have been given the set second hand with stand but no screws. Don't know where to start to get the right...


Look on the back of the set around the edge. Remove one screw and see how it fits in the position for holding the stand. If good then take the screw to a hardware store or home center store and get all you need. It will most likely be metric. If the screw was short, then get the length you need.
Replace the original screw.

Mar 03, 2011 | Televison & Video

1 Answer

RCA L26WD21 No picture/white screen but still have sound


It sounds like the LCD controller board went out, look inside to see if the cable may have come off the LCD controller board. You can look and see what it looks like here: http://www.shopjimmy.com/catalogsearch/result/?q=RCA+L26WD21+
Please post back what you find.

Dec 25, 2009 | RCA L26W11 26 in. HD-Ready LCD Television

1 Answer

Taking off stand from LG tv to mount on wall


I work on TVs and the amount of screws in the back is crazy.

find a place to lay the tv down on the screen, use some pads and a blanket to prevent scratching or cracking screen. your couch or bed may be a good choice, but make sure it is stable. let the stand hang over the edge with no weight on it. now look for 6-8 screws per per leg of the base. depending on the size of your tv. these are usually the larger screws on the tv and attached to the frame of the TV. remove these screws in the base and slide the base out.

your manual should also have a brief description of base removal as well. dont worry about taking out the wrong screws, you can put them back in it is not the right screw. with tv on its face, no parts will fall out. hope this helps.

Apr 08, 2009 | Televison & Video

2 Answers

Tv stand screws


Check the kitchen drawer next to the fridge for the screws !!

When you get new screws, use lengths 1/2".. any longer and you might hit something inside.

Don't know why this is posted under IS-LCDTV26.. I would pull a screw from my 26" and measure it, but it's most likely different than your 42"

Sep 01, 2008 | Insignia LCDTV26 26 in. Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69878 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6445 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...