Question about Linksys Wireless-G WRT54G Router

2 Answers

No connection i have not connection through my router at all. i know its the router because i can connect my comcast line directly to my computer and it works. i an now longer able to get to 192.168.1.1. o ya and i put a WEP password on before i got locked out. i triked reseting my router thousands of times. idk what to do. at this point ill do anything to get this working.

Posted by on

  • Anonymous May 16, 2008

    cant connect other pc

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 50 Answers

That should do the trick, if not email me and I will give a new direction
Aloha
Bob

Posted on May 12, 2008

  • Lindsey & Associates
    Lindsey & Associates May 27, 2008

    You need to PC Config, and IP Config, then go back to 192.168.1.1 then to set up tab, but I need you to do a Hard BOOT to the router, and you will be ok

    Aloha

    Kahuna

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 144 Answers

Hello!

-- who is your internet service provider
-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings
Step 7: test the Internet connection.

Posted on May 12, 2008

  • serra baby
    serra baby May 12, 2008

    note:



    configuring the router settings will depends who is your provider. if your isp is dsl you need to configure your ISP username and password on the router. if your router is a cable no need to change any settings on the router. it should automatically work

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Comcast unhooked it and i dont know how to hook it back up


Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Click Here for more information about the routers and network

May 10, 2010 | Belkin (F5D7230-4) Router (587009)

1 Answer

I have a Zonet Router that I am hooking up to Comcast DSL internet. i show that i am connected but i can not get online. i duplicated the MAC address i just dont know what else can be wrong. is there a...


The first thing is that Comcast is Not a DSL connection it is Cable connection. Now first make sure that your computer will be able to go on line when connected directly to the modem. Connect your main computer directly to the comcast modem and check if that goes on line. If not then you will need to contact Comcast and get main computer on line. If it is online then reset your router for 30 seconds. release the reset and wait for 1 minute. Now connect the main computer to the router and comcast modem to the router. open the set up page and Clone the MAC address of the " Main " computer.
power cycle the modem and the router. See if it works.
Click here for more information about router and networking

Apr 19, 2010 | Zonet ZSR1104WE Wireless Router

1 Answer

I have recently moved from Pittsburgh, PA to Charleston, SC. My linksys Wireless G 2.4 gHz router worked great with the ISP in Pittsburg (Comcast). Now, with Time Warner's Road Runner, I get an error and I...


Connect your main cmoputer directly to the time warner modem. make sure that your computer will be able to go on line when connected directly to the modem. If not then call Time warner.
If your computer is able to go on line when connected to the modem then your modem is working properly. You will need to change the settings of the router.
First reset the router for 30 seconds. On the router you will find a small reset button. Hold it down for 30 seconds. release it. wait for 1 minute. now unplug the power to the router and plug it back in. wait for 30 seconds till the power light on the router will be solid.
Now connect the modem and the computer to the router.
Now you will need to clone the MAC address of your main computer to the router. you will neeed to open the set up page of the router.
once your main computer is online , you can change the wireless settings of the router and connect to the wireless network on the laptop.
Click here for step by step solution

Apr 10, 2010 | Linksys Wireless-G Broadband Router

3 Answers

D-link has stopped working with comcast internet.


Are you trying to install the router.You can do it manually
without the CD.
MAke sure that your computer is able to go
online through the modem.
If your computer is able to go online
through the modem
Then you need to connect the computer to the
router ad the modem to the router.
open the set up page of the
router and change the settings of the router according to the
ISP.
Click Here for step by step by instructions

Jan 16, 2010 | D-Link AirPlus Xtreme G DI-624 Wireless...

1 Answer

Moved router to connect directly to the Comcast modem that also provides VOIP. Comcast activated modem and internet works when computer is connected directly to Comcast modem. Router does not connect to...


Your ISP should have given you the following information...
Static IP, Internet IP Address, Subnet Mask, Gateway, Static DNS 1-3.
With that information at hand, follow tis link to the router user manual and go to Page 11 of the manual to go through the step by step process of setting the router up for an internet connection.

http://downloads.linksysbycisco.com/downloads/WRT54GX2v2_ug,1.pdf

Nov 26, 2009 | Linksys WRT54GX2 Wireless-G Broadband...

1 Answer

Internet connection problems


Sorry but that seems to be a pretty convoluted explanation. Here is how it should go.
Vonage unit connected to phone line(s) and cable modem. Linksys connected to Vonage box. Computers connected to Linksys.
Ethernet has a length limitation of about 300 feet before you need another switch (hub) or a repeater. Does your wire length exceed this?

Apr 20, 2009 | Linksys WRT54GX2 Wireless-G Broadband...

1 Answer

Loss of internet connection when going through router


Your laptop seems to be hooked to your neighbours unsecured network automatically and it is going online with that. About comcast, when you connect a router to the modem or a computer to the modem, the modem has to be rebooted to give a valid IP to the connected device. If the modem is not rebooted the computer or the router will get 192.168.x.x IP address which is called private IP address.

Nov 19, 2008 | Check Point (CPWSHCRA6500UUS) Router

1 Answer

I HAVE A COMCAST WIRELESS ROUTER THAT I AM TRYING TO USE TO CONNECT MY PC TO THE INTERNET. I TOOK THE COMCAST ROUTER AND PLUGGED IT INTO MY PC AND IT HAS THE GREEN LIGHT ON HOWEVER IT WON'T LET ME CONNECT...


You have a lot of different things going on here.
First, your provider is AT&T so you have ADSL service.
Comcast supplies their service over cable.
AT&T should have provided you with an ADSL modem that is connected to a phone wire. Normally another cable (ethernet, patch, RJ45, Cat5) connects the modem to the network card in your computer.
I don't know what model of router you have but there are 2 possiblities as to type. It can be a regular wireless router or it can actually be a cable modem with a built-in router.
If this is a normal router it will have a port labelled either Internet or Wan (normally, some companies do strange things), you should connect the cable from the ADSL modem to this port.
If it does not have a Internet or Wan port but has a round screw type cable connection, you have no way to connect this to the DSL modem and it will not work for you unless you switch to a cable provider. Even the it may not work because some providers check the MAC address of the unit and will not issue it an IP address unless it matches the one in their files.

Ok, lets say this is a normal wireless router. You have the phone line going to the ADSL modem and then a Cat5 cable going to the Wan port of the router, you are not out of the woods yet because most desktops do not come with wireless hardware. You need to get a Wireless PCI card and install it or if you prefer they also come in USB.

Done? Probably not. If this was a used router it was probably configured at one time and you will not be able to connect to it unless you happen to know the security key. This means you will have to reset the router back to factory default and configure it from scratch. Of course you could luck out and security was never configured for this router but you should still configure it unless you want everybody within range to be able to connect to your router and possibly your computer.

If after this long winded explaination you still want to do this, get back to me with the specific make and model of the router and what operating system you are using and we can go from there.

Oct 17, 2008 | 2wire (1000-400108-001) Router

1 Answer

Wireless connection


Possible you did reset the router. Its okay to connect to that linksys network name. But if you want to customize you network name.

MAKE SURE TO USE THE WIRED COMPUTER TO SETUP WIRELESS CONNECTION.
Example : The Desktop computer that is connected to directly to router.


Just follow the steps.

http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3967&p_created=1159257209&p_sid=aNKUFggj&p_accessibility=0&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9ODExJnBfcHJvZHM9MCZwX2NhdHM9MTcyMSwxNzIzJnBfcHY9JnBfY3Y9Mi4xNzIzJnBfc2NmX2xhbmc9MSZwX3BhZ2U9MSZwX3NlYXJjaF90ZXh0PUNoYW5nZSBTU0lE&p_li=&p_topview=1

Hope it will work..

Oct 14, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Belkin router


you need to access router configuration page and have it get an IP from Comcast DHCP server.


Jul 01, 2008 | Belkin (F5D7231UK4) Wireless Router

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Mike

Level 3 Expert

4331 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...