Question about Jenn-Air JGS8860BDP Stainless Steel Gas Kitchen Range

Open Question

I recently purchased a used Jenn Air range model JGS8860BDP. When I looked at the range all burners turned on as did the oven. We have just hooked the unit up and the burners are not working well and the oven is not climbing in temperature like it did when I tested it before buying. However, I set the convection oven on to 350 and it did climb, VERY SLOWLY, to 158 before I just turned it off. Do I need to order a new spark module, and what about thte oven? Is there a pilot light that needs to be lit? Thank you! Lisa

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Jenn-Air Convection Oven

Our 7 year old "Jenn-Air Convection Oven", Canadian Model # SVE47600 also has a very dim display. We can barely read the temperature on the oven. Does anyone know what is wrong, how to fix it, and what it may cost us?

Posted on Jan 02, 2008

Ad
  • 1 Answer

SOURCE: Jenn-Air electric range

my jen-Air has a problem with it continuing to beep. Ive tried to get it to stop by pushing all the buttons. When I pust the off/cancel button it just keeps beeping. Tried the stop timer button and same thing. When I turn on either the bake or convection bake button it automatically just shuts off by itself. It is approx 10-13 years old. HELP, or please tell me to get a new one.

Posted on Oct 23, 2008

  • 1 Answer

SOURCE: How to replace spark igniter - Jenn-Air SEG196 gas-electric range

took off the knob to the ignition system to clean and spray got onto the ignition under the dial and now the two front burners won't ignite unless I turn on one of the functional back burners then turn on the front burner. How do I repair this?

Posted on Oct 11, 2009

  • 1 Answer

SOURCE: Jenn-Air S136 Grill-Range--auto clean not working

Selector to Clean
Temperature to Clean
Move lock lever to the right
Press the enter button Twice

Posted on Nov 27, 2009

  • 254 Answers

SOURCE: Our jenn air model js9860aab control panel buttons

no.. u must replace the touch pad assrmbly that whole unit.... i think u have a jds9860aab i believe... the part number u would need would be 74005750 it is for sale through sears at $272.00... u might need service.. u can take a look at part at repairclinic.com just type that part number in. ohhh also i believe this is a backordered part so most companies would prob take 2-3 weeks to get soo hope this helps..

Posted on Jan 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I purchased a house w/ a Jenn-air elect. drop-in range. The Model # is 87946 or 87847. I believe the range was originally purchased in 1975. I am in need of an instruction manual .


Neither of these are a typical Jenn-Air model number. http://shared.whirlpoolcorp.com/product_literature/search.jsp?siteCd=JA_EN_US suggests that the model number is on the back wall under the burner on the right side of a drop-in cooktop. For a range the model number is often on the frame inside the oven door, below the vent or on the back of the top of the range.

87946 or 87847 are the part numbers for the cartridges (the elements or the surrounding housing).

Look at the model number locations at the "Help me find my model number" link and try to locate a model number on your range. Then enter that model into the search box. The manual is probably available with the correct part number. Most Jenn-air electric cooktops start with JEC in their model number.

I hope this helps you locate the manual.

Cindy Wells
(I did try JEC87847 just in case you left off the leading alphabetical characters.)

May 08, 2011 | Jenn-Air Microwave Ovens

1 Answer

My folks recently purchased a house with a Jenn-Air S160 electric grill-range/oven. The left hand side electric burner cartridge's back burner superheats on the low setting. I've switched the burner...


Sounds like the problem is in the control assy. especially if you switched the burnners and the problem remained. Go to the jenn-air website and see if they have a parts breakdown for your unit.
Record the model number of the unit before you search, you will need that info.

Apr 16, 2011 | Microwave Ovens

2 Answers

Gas range igniters won't shut off


The problem that you're describing is commonly associated with the spark modulator. It usually occurs after a spill or when the ignitor electrodes have remained wet after a cleaning. If after a day or two it continues to spark intermittently on its own, then the only recourse would be to replace the module. Hope this helps,,,, Bill

May 28, 2009 | Jenn-Air JGS8860BDP Stainless Steel Gas...

1 Answer

Jenn air gas/elctric slide in range self cleaning does not work


iF THEY ALREADY REPLACED THE EXHAUST FAN , MAY WANT TO REPLACE THE HI LIMIT THERMOSTAT AT REAR OF OVEN... THE THERMOSTAT MAY RESET AFTER 20 MININUTES OF COOL DOWN..

Apr 02, 2009 | Jenn-Air JGS8860BDP Stainless Steel Gas...

1 Answer

My electrician is here to do the electrical for my new Jenn-Air Gas stove Model # JGS8860BDP.  The store said we need both 110 and 220 outlets inside the stove space.  My electricial doesn't think...


Trust the Electrician. 99.9% of the time, the only requirement for working at a retail store is to know absolutely NOTHING of the product they sell. Where an electrician is liable for any damage to property or person injured due to his/her work... not to mention to 2 years of required training to get your journeyman lisence.

Jan 13, 2009 | Jenn-Air JGS8860BDP Stainless Steel Gas...

1 Answer

Reigniting burners


the oven is suffocating the to burners with the heat coming from that draft you can put some oven insulation there to stop the problem.

Nov 28, 2008 | Jenn-Air JGR8775QD Gas Kitchen Range

1 Answer

Have a slide in Gas Jenn Air model JGS8860BDP, but no manual. Ho


Google your range (i.e. Jenn Air JGS8860BDP). You will be brought to Adobe Reader which will have a copy of the User Guide for your range. Doenload it to your computer, or print it directly.

Nov 11, 2008 | Jenn-Air JES9860 Electric Kitchen Range

1 Answer

Ignitor would not turn off on front left burner


Same problem with the ignitors on the burners myself.  But only when i turn on the left side burners do they continually spark.  Any one know what ignition module on this?  How does it prove flame?  To ground?  Might I have a bad ground causing it to not rectify the flame?

May 16, 2008 | Jenn-Air JGS8860BDP Stainless Steel Gas...

Not finding what you are looking for?
Jenn-Air JGS8860BDP Stainless Steel Gas Kitchen Range Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Kitchen Ranges Experts

Mike Carew

Level 3 Expert

969 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2286 Answers

Are you a Jenn-Air Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...