Question about Panasonic SDR-H80 Hard Drive Camcorder

2 Answers

My photo's are not sharp and clear. What am I doing wrong?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Clean front lens of camera and make sure its shining clear then give little time to camera to focus the image then press shutter button to take picture.
This will help you to have sharp, good focus pictures.

Posted on Sep 04, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Panasonic Master
  • 3,866 Answers

You could be doing nothing wrong, These cameras have auto focus and when there pas there prime, you need to get them fixed basically.

If the output is out of focus more then likely the auto focus is your issue.

Hope this does help, would be considerate if you do leave a rating or feedback before you go, Thanks

Posted on Sep 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp 2618


This problem on your copier heater section,I mean bnormal temparature.So you can reset it,.
Press your copier panal board button
C (Clear) Photo(exproser bytton) C Photo
Press 14 Make up and down arrow key press print key(Start key)
C>Photo>C>photo>14>print key
all are ok

Apr 22, 2010 | Sharp AL 1631 Copier

1 Answer

Sharp Z-835 Copier with H3 error code. Your


Hello sir; I don't know which button you are talking about,but follow my steps to reset ; press " clear" , " exposure mode " , "clear " , " exposure mode" those keys , then enter 14 press start. should take care of you. the exposure key is under auto, manual, photo.

Jan 29, 2010 | Sharp Office Equipment & Supplies

1 Answer

How do I clear F2 and H4 on Sharp photocopier


F2 means wrong cartridge installed, could be a bad cartridge. H4 is a low fuser temp error. try resetting by pressing "#","interrupt","C","interrupt. then press"1","4","start". then turn off/on and see if it clears. if not you will need a tech.

Nov 12, 2009 | Televison & Video

2 Answers

SHARP AL1631 drum light wont go off.


you have to reset the drum code by doing the following

press clear / density select /clear / density select

select 24 and enter
7 and enter
restart copier and away you go

Jun 19, 2009 | Sharp AL 1631 Copier

2 Answers

SHARP AL-1631 DIGITAL COPIER SHOWS ON THE SCREEN CODE H4 WHEN SWITCHED ON.


Hello sir; You do need following procedure to reset; once begun procedure must enter within four seconds; Press "clear", "exposue mode", "clear", "exposure mode" these 4 keys within 4 seconds, then enter 14, then press start, should take care the problem.

Jun 12, 2009 | Sharp AL 1631 Copier

2 Answers

Need reset code for Sharp AL1631 copier drum


USING ONE FINGER PRESS CLEAR, AUTO(EXPOSURE SETTING), CLEAR & AUTO YOUR DISPLAY WILL GO BLANK, IF IT DOESN'T GO BLANK TRY IT AGAINSOME MACHINES ARE TEMPERMENTALWHEN YOU GET IT GO BLANK PUNCH IN 24 THEN PRESS THE START KEY THEN PUNCH IN 07 AND THEN PRESS THE START KEY AGAIN. THAT WILL RESET THE DRUM COUNT. TO GET OUT OF THAT MODE PRESS CLEAR A COUPLE TIMES OR TURN IT OFF & BACK ON

Apr 09, 2009 | Sharp AL 1631 Copier

1 Answer

Code H4 is showing on the machine


h4 code in sharp .that s fuser temperature very high .just reset it.press clear key,auto photo key,clear,auto photo key.copier goes dead .when it goes dead just press 14 then start key.copier will bi ready after some time.it works.by mian jee

Dec 17, 2008 | Sharp SF 2020 Copier

2 Answers

Sharp AR-M160 H4 error code


Clearing a trouble code on a AR-M160 is a little different than the AR160.

Try "#" "interrupt" "clear" "interupt" "1" "4" "start key"

This should clear the error. Even if you replace the fusion unit you will need this code to clear the error

Oct 26, 2008 | Sharp AR-M160 Laser Printer

Not finding what you are looking for?
Panasonic SDR-H80  Hard Drive Camcorder Logo

Related Topics:

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Video Cameras Experts

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1805 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

zimcloud

Level 2 Expert

135 Answers

Are you a Panasonic Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...