Question about Cell Phones

2 Answers

Last night a phone number I do not recognise rang my phone, but never left a message. I did 1471 and the number is 01379 870428. I do not know anyone in the Suffolk area around Diss/Eye etc. I live in Chatham, Kent. I tried to call he number back today, but a recorded message said the number 'was invalid'. I have checked on the website and the number is Valid , belongs to the location I have put above and the number is a BT owned one. Can anyone tell me how I can find out who the number belongs to? Could it be that someone has unplugged their phone, so I can't ring back or what?? I really need to know who called me and was frightened to leave a message.

Posted by on

  • js006m5839 Sep 04, 2010

    But why would someone ring, not leave a message and then all of a sudden disconnect the phone?
    How comes the phone number is invalid when I rung it, but not when 'whoever' rang me last night??

  • js006m5839 Sep 04, 2010

    This is NOT a Cellular phone problem. It is a landline problem. I meant to say that when I phoned the number back today, the woman's recorded message was 'the number you have dialled has not been recognised'. Not what I originally put.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cell Phones Expert
  • 2,973 Answers

Friend, All telecom companies give some numbers for tele-marketing. These are the unlisted numbers and can not be called back. The call that you received is one of those calls trying to market some products. The number is genuine but unlisted and cannot be called back. It happens to most of us everyday. So, please do not give it a second thought. All you can do is to register your number with a service "Do Not Disturb", if your country has one. Once registered, such calls will stop unless they are from your service provider. To do this you must call up the helpline of your service provider.

Posted on Sep 05, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,865 Answers

Hello. The websites are always the last to learn that a number has been disconnected. You could try using what is called a reverse phone book which will allow you to type in the number and then it will give your the info on who's number it is. To find the reverse phone book just google reverse phone book... J.

Posted on Sep 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power substation blew up last night, which meant flickering lights, and low power (extremely weird). Today I have power -- finally -- but I can't reset my oven like I usually do when there is a power...


You have a defective touch pad(stuck button) probably from the surge that happened last night. to access this you will need to disconnect power and remove the back upper panel. Usually four screw hold on the board. Make sure when you are changing the board swap wire for wire to ensure correct install.
Part Number: 3191645

May 26, 2011 | Roper FEP330KQ Electric Kitchen Range

1 Answer

I dropped my phone and the battery came out when plugged it back in the phone says out of range and i dont know how to fix it


You need to reinstall the phone so that it can recognise its base signal.Your manual will show you how to do this.If no manual search online or message us back.

Oct 14, 2009 | Uniden Cordless Phone

3 Answers

"00 msg slots left."


click HOME, then go to SETTINGS, then you go down to MORE, then go to SECURITY, and it will ask for a USER LOCK ( it is the last FOUR digits of your cell phone number like for ex. 555-465-6788. 6788 could be the last for digits if this was somebody's cell phone number. after that click ERASE/RESET, and erase ALL of your Web cache; web history; and web cookies and erase all of your messages if you scroll down.

Aug 28, 2009 | Samsung Exclaim M550 Cell Phone

1 Answer

Night Service and Diver All Call to Voice Mail


make sure the call rerouting always is setup and points to the vm huntgroup, then check the call rerouting assignment points the answer point extn number to the relevant always alternative in night1 and night2 mode

ie; always alternative 10 set all to Reroute and supply vm huntgroup number then program call rerouting assignment for extn during night1 and 2 to 10.

let me know if this resolves the issue if not it could be a number of other timer related / vm configuration / call routing problems which might require a more indepth investigation

Feb 09, 2009 | Mitel 5020

1 Answer

Electronic touch pad not working on my oven


Hello beachlady80,
Welcome

You said, It was working fine last night but when you woke up this morning the display has 3 vertical lines and none of the electronic touch pads work. The burners on top of the stove still work.

What is the model number and how old is the range ?

Try turning the breaker off for 10 minutes and then on again after this allotted time.
This may reset the system.
Let me know how it works.


Waiting for your answer.
Huuum

Please remember to leave a rating.
Hopefully it will be a solved!
Let me know

Oct 16, 2008 | Maytag MGR6772 Gemini Gas Kitchen Range

1 Answer

Enable Custom Messages


It's hard to see what you recorded the custom messages on, since you left that part out.

I'm guessing that whatever you recorded the messages on has a manual. Try reading it. Is your day greeting a custom message or is it one of the 32 announcements? However you play that message, you need to either replace it, or assign a new message or mode to the auto attendant.

Carl

Aug 25, 2008 | Panasonic KX-T7453 Corded Phone

1 Answer

W850i


take the phone to a service center to be fixed

May 19, 2008 | Sony Ericsson W850i Cellular Phone

1 Answer

Power outage last night. Deleted all saved voicemail messages. when turned on - machine says "no massages" How do I retrieve lost messages?


I'm sorry there isn't. Answering machines like this have very little ROM memory. After a powersurge and outage like last night, it wiped the whole memory chip. You can try there support page. It's actually pretty good. http://telephones.att.com/telephones_ui/support/index.cfm

Jun 28, 2007 | Lucent 1872 Corded Phone

Not finding what you are looking for?

Open Questions:

Cell Phones Logo

Related Topics:

347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

William Alequin

Level 3 Expert

922 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...