Very shortly after I got my tv the remote started working very slowly. I don't know what i did to it, if anything, but each time I press a button I have to wait for the red light to blink 6 times before I can press another button. Very frustrating. Any solutions?
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Unfortunately the user manual does not have a pre-programmed code for Dynex, so your best bet is going to be performing a code search.
1. Make sure the TV is on 2. Point the remote at the TV and hold down "CODE SEARCH" for at least 3 seconds, until the red light lights up solid 3. Press the "TV" button once and the light will blink once, then return solid red. 4. Press the On/Off button repeatedly until the TV turns off (go slowly enough that you don't keep pushing on/off after the TV turns off) 5. Once the TV turns off, press the ENTER button and the code will save (and the red light should go off)
This may take a while, so be patient, but if anything should get it working with your TV this will be your best bet.
You hold the remote close to the three buttons on the vehicle. You choose which button you want the remote to transmit to, and you hold it down. With your other hand, depress the garage door remote opener, and hold it very close to the 3-button assembly. Wait for the red L.E.D. light to blink slowly. If it does not blink slow, continue moving the remote around, until it does blink slow. When it starts to blink slowly, stop moving the remote around. Wait until the light starts blinking rapidly. When the light blinks rapidly, the process is complete.
To get your Innovage Jumbo Remote Control connected to your TV you need to program it with control codes specific to the brand of your TV. If you know the brand of TV you have you can look up the control codes for that brand in a chart. If you don't know the brand, or if the codes in the chart do not work on your TV, you can perform the auto-search function of your remote to find the codes that work.
To search for the control codes that will work on your TV, follow these steps:
Turn on your TV.
Press and hold down the CODE SEARCH button for 3 seconds until the red LED lights up solid red.
Press the TV button on the remote. The LED will blink once and then remain solid red.
Press the ON/OFF button on the remote slowly and
repeatedly until the TV turns off. The LED will blink once each time
you press ON/OFF.
Once the TV turns off, press the ENTER button to store
the code. The LED light will turn off, and your remote is programmed
for your new TV.
jenson 300 series Sony tv codes 497,491,475,459,406 or the code you have hold the program or setup button untill it blinks. select the tv function and enter the code you have or one i listed above then enter
Or if your remote is this 300c series your code would be 0000 you would press down and release the device"mode key"tv,vcr,ect the red light will blink once.press and hold down the setup key untill red light blinks twice then release.enter the code the led light will blink once on each digit execpt the last one will blink twice to confirm valid code ****mode 1 is for the tv on this remote.