Question about Dell Computers & Internet

Open Question

CMD window opens, ays failed to nobulate back to the manufacturing media such that the software installed process cannot continue reliability. DO N REBOOT THIS SYSTEM FAIL THIS SYTEM TO EMR then it says press any key to continue I do, doesnt do anything. At the very top of the window it says x:\windows\system32\cmd.exe I dont know what else to do, I have the disk to restore the computer but it keeps giving more errors even after installing a brand new hard drive and loading Vista onto that. Ive tryed about every diagnostic there is

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Techie Zone
  • 4 Answers

SOURCE: C:\Windows\System32\cmd.exe blanked.

Could you explain the issue in detail?

Posted on May 23, 2008

  • 538 Answers

SOURCE: I have a emachine computer(window

press F8 when turning it on and before icon appears on screen

Posted on Oct 15, 2008

  • 207 Answers

SOURCE: restoring dimension 9150


It sounds as if your restore partition has become corrupted. You vcan Contact Dell and order a restore disk

As far as trying to Install from Install CD goes. Well Win XP does NOT recognize SATA drives natively. You have to install the sata drivers to get them to appear. You can download them from the link below.
If you have a floppy drive, this is easy just copy to a floppy. Then during the install WinXP says something to the effect of "Press F6 to install 3rd party or RAID drivers" hit <F6> and direct it to the drivers on the floppy.

You should now be able to complete your WinXP install.
If you don't have a floppy drive post back here and we'll try to see if we can get the drivers in there another way.


Posted on Nov 21, 2008

  • 156 Answers

SOURCE: cmd problem

This is curruption in windows partition, most probably because of a virus. do following

  1. take backup of your important data
  2. use a good antivirus and scan PC
  3. if dosent work delete all partitions using thirdparty SW like diskmanager or Linux Bootable or another windows xp PC
  4. Reinstall windows and reportition.
  5. Try with another pair of RAM
  6. Pl dont forget to all device drivers/motherboard drivers before trying
if not succeed, please contact me

Zulfikar Ali

Posted on Mar 13, 2009

  • 31 Answers

SOURCE: I hit F8, here is the new error message

If this is all you are seeing, then this is not an error. What is happening here is that your computer is loading Safe Mode. This is a way to load Windows operating system without any extra software or programs, using the most basic drivers and software to load. There are a lot of benefits to accessing this mode, especially if you installed a program that stops you from getting into Normal Mode, or you have a virus that does the same. It makes it easy to troubleshoot. Here is a link to a website with a little more info:

If you load your computer normally by not pressing any keys, then you should be fine.

Posted on Mar 27, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


Hello c:

In case you have a Windows *********** and don't know where to put it after installation : - In Windows 10:

Select Start, then Settings > Update & security > Activation > Change ***********, and just put it there.

- Or in Windows 7:

Start, Control panel > System > Change ***********.

- Alternative solutions ( Windows 10/8.1/8/7 ):

* Search for "Slui.exe " ( easiest is in the start menu ) and run the program as administrator. A window will pop up, letting you change your ***********.

* Search for "cmd" and run command prompt as admin. A black window will appear and you will have to type this line in it :

"slmgr.vbs /ipk <Your ***********>"
Without Quotes, Then hit enter.

In case you are talking about any software/game/donut : Please specify which activation code you are refering to :D

Jul 05, 2017 | Computers & Internet

1 Answer

I need the mac number of my samsung NP-900X3A laptop in order to trace it.


assumed you are running a windows operating system on it (u didn't told here) then :
press start button -> start typing cmd -> wait few seconds till your system found cmd, run it -> type into cmd : <ipconfig /all> (without <>, remark the space before slash) and press enter.
the output now will list u all network adapters, including their mac-addresses.

regards nayss

Oct 14, 2013 | Samsung 900x Ultraportable Laptop...

1 Answer

Naka online yung printer pero pag nag na click na yung PRiNT . nka "" OFFLiNE "" ?

You may need to re-install the printer drivers; but before you do that, first go to the command prompt:
(1a) For Windows XP: Click Start --> Run --> Type CMD --> Press Enter

(1b) For Vista or 7, go to Start and type CMD directly in the Search box

RIght-click on the cmd icon that appears under the Programs list and select rictutero_13.jpg as seen above (If a User Account Control window comes up, click YES)
(2) In the command prompt that opens up, type NET STOP SPOOLER and press Enter

(3) Wait for the command to finish, then type NET START SPOOLER and press Enter

(4) After the command completes, you can retry printing. If it still fails, then you will have to re-install the printer drivers.
(5) You'll have to insert the printer drivers disc: it usually runs the installation immediately & these applications can detect if you already have it installed. You will be prompted to remove the software; after which you can repeat the process (step 5) to re-install the application and try printing again.
If all these fail, you would have to test the printer on a different computer to see if it exhibits the same symptoms. If they do, then the printer will have to be checked for possible repair/replacement. If not then there's something wrong with the operating system on YOUR computer and it will have to be checked separately.

Aug 14, 2011 | Computers & Internet

1 Answer

I bought an Apple Ipod Shuffle, 1st generation, on ebay. It has rock and roll and I can't stand that kind of music. I would love to reset it. Also do I need Itunes just to download my own music? Help! ...

You don't HAVE to have ITunes to sync your music to the ipod, there are a few alternative options for media players that have that feature. However, if you're unfamiliar with ipods and/or media players I do suggest starting with itunes as it pretty much prompts you through the process step by step once you've installed the software itself. My advice is to get comfortable with the ipod as well asITunes first, than if you don't like ITunes you can look into the alternative options.
As far as getting rid of the previous owners rock n' roll... Once you've installed itunes and plug the ipod into your computer, with the white usb cable that came with it, ITunes will walk you through a full on reset and you can setup the music & sync settings to your liking.
Here's a few links to help. Again, I highly suggest you start with ITunes until you learn and are comfortable with the device before moving onto a 3rd party media player.
>>>> ITunes direct download <<<<<
other compatible media players......
- WinAmp - Media Monkey - SongBird

Mar 06, 2011 | Apple iPod shuffle 1st Generation (1 GB)...

3 Answers

A message appearing"you may be

Windows Genuine Advantage Notifications for Windows XP notifies you if a copy of Windows XP is not genuine. The notification messages only appear on computers that have failed the WGA validation process and that are running a copy of Windows XP that is not genuine. If you are running a validated, genuine copy of Windows XP, you will not receive notification messages.
Removing WGA Via The Command Line Restart your PC and boot into Safe Mode, usually by pressing F8 whilst your computer boots. Once your PC has booted open a command prompt by clicking Start then Run and typing cmd into the box before clicking OK.
Change directory to your System32 folder with the following command:
cd \windows\system32
Next you're going to need to copy the following lines to the clipboard, in order to paste them into the command prompt quickly. This is necessary to kill the WgaTray.exe process and delete the file before Windows has a chance to launch it again:
taskkill -IM wgatray.exe
del wgatray.exe
del wgalogon.old
If all the commands executed correctly you should have killed and deleted WgaTray.exe as well as WgaLogon.dll. You might also want to have a look for any WGA-related files (WgaTray.exe, WgaLogon.dll, WgaSetup.exe etc...) in \Windows\System32\dllcache and delete them, just in case.
Restart your PC to see if the changes have taken effect, if the WGA notifications are still there then you'll want to continue reading this next bit, otherwise you're done.

Jan 02, 2011 | Microsoft Windows XP Home Edition

1 Answer

I have prloblem with nsis error

The installer has failed a self-check. This means that for some actions, the installer file has been altered from its original form. If the install were to continue, the software install would not be complete and will be broken. To prevent further problems, the installer refused to continue.
If you are receiving this problem from an installer located on a disc or other media besides the Internet, then the problem may be due to a hardware failure or more likely the physical media being damaged. Try reading files from other parts of the media. If you are receiving read errors with other files on the disc, then the problem is likely due to damaged media. You will need to contact the source of the physical media for a replacement.
As a last resort, the installer can be executed even though it's corrupted. To bypass the corruption test, pass /NCRC on the command line. To do so, go to Start->Run, type cmd and hit Enter. A black console window should open. Drag the installer into the window, hitSpace and type /NCRC. Hit Enter again and the installer should start. This is not recommended!
NSIS Installer/Uninstaller will raise this error whenever you will launch the installer/uninstaller from an forbidden location (such as C:\, C:\Windows, C:\Program Files, etc).

Dec 27, 2010 | HP Computers & Internet

1 Answer

Can't install audio driver


Please try several things:
1. Try to delete your device from device manager if it exists there: right click on "My Computer" -> Manage -> device manager. Then - right click -> Scan for hardware changes, insert media with your driver software and/or let windows automatically search for driver.
2. Try to reboot in Save mode (reboot, press F8 until booting mode selection appears and choose save mode) and install driver in save mode.
3. If none of above helps - try to update your Windows XP and then try to install driver.
4. Try to change audio adapter physical slot - open your PC and just insert it to other PCI slot (also - de-dust your slots before :) ).
5. Try to unpack driver and manually select it during windows driver installation process (choose not to connect to internet when wizard asks -> Install from a specific location -> Don't search I will choose the driver to install -> Have disk -> browse -> select .inf file and click ok).

Hope this will help. Good luck!

Jul 02, 2010 | Intel ESS ES1868F Sound Card

1 Answer

I want to remove genuine microsoft software,,,

  1. If you have only just installed Windows Genuine Advantage notifications, simply using the system restore function will remove the program. Then refuse to accept the WGA update next time Windows updates... Otherwise, proceed as detailed below. (NOTE: If you try these steps while you are in "Safe Mode," step #8 is unnecessary).
  2. First Try the Following:
  3. - Open a CMD Line Window by Clicking on Start ==>Run ==> type CMD and Press OK.
  4. - Change Directory into the System32 Folder (Like Cd c:\Windows\System32)

Jun 20, 2009 | Microsoft Office Professional 2007 Full...

1 Answer

Service Pack problem

******************************************************************* VideoCam Suite 2.0 *******************************************************************
[Table of contents] 1. Notes about operating environment 2. Notes about operation
<><><> 1. Notes about operating environment <><><>
1. [Important] Adobe Acrobat(R) Reader 5.0 or later or Adobe(R) Reader(R) 7.0 or later is required to read the operation manual or the help information on your PC. Get the license for using the operation manual before reading it.
2. AC adapters are recommended when using a notebook PC or a HDD/SD video camera with the VideoCam Suite. If a battery pack is used to power the HDD/SD video camera or the notebook while recording or previewing motion pictures or still pictures, they may not be recorded, previewed, or copied to the PC Hard drive properly.
3. Standard configurations must be used for the fonts and screen settings for Windows(R). Depending on the settings, characters may not display properly.
4. It is impossible to use VideoCam Suite simultaneously with other motion picture editing software or video capture products. Note that this software may not function properly if software with a timer recording feature in the background is running.
5. This software will function properly only when the system time is set to a value within the following range. From 0:00 on January 1, 1970, to 23:59 on December 31, 2037 If the system time is set to a value outside the range listed above, the software may not start or function properly.

<><><> 2. Notes about operation <><><>
1. After installing/uninstalling the application, a dialog box is displayed notifying the user that the system needs to be restarted. Make sure to restart the system to complete the installation/uninstallation.
2. This software can handle only motion pictures and still pictures recorded by this software or the Panasonic video camera packed together with this software. This software cannot process motion pictures and still pictures recorded by any other video cameras, DVD recorders, software, commercial DVD video, or commercial BD video.
3. User privileges for this software - It can be used by only a user with administrative privileges for Windows(R) XP and Windows(R) 2000. - It cannot be used by the Guest users in Windows Vista(R)
4. While recording, if motion pictures cannot be recorded properly for any reason, follow the procedures described in the operation manual to restart the Windows system. Motion pictures may not be recorded properly if any other application software is used while recording the motion pictures. Close all other application software and any resident programs, such as virus scanning software. We recommend closing all other applications and resident programs, such as virus scanning programs, before starting this software. While recording motion pictures on a DVD disc/SD card do not execute the following operation since it may disturb proper recording and destroy the DVD disc/SD card. - Turn off or restart the PC or DVD/SD - Switch users or log-off - Change the screen settings - Use the power saving functions, such as the screen saver, sleep, standby, and pause. - Close this application by force
5. To record motion pictures on a DVD disc or an SD card, check that the motion pictures can be recorded properly. After checking that motion pictures are recorded properly, delete the original motion pictures from the PC Hard drive.
6. When the edited motion picture is output in MPEG-2 format, some scenes may not be generated completely in MPEG-2, and some parts of frames may be shifted or omitted.
7. When motion pictures are copied from a DVD-VR formatted DVD disc to the PC Hard drive, data other than motion pictures cannot be copied.
8. Do not modify or delete any files or folders related to this software. Otherwise, the software may not function properly.
9. This software can only process DVD-Video discs recorded by this software. This software cannot properly process DVD-Video discs recorded by any other DVD authoring software.
10. This software cannot process motion pictures or DVD discs/SD cards that are copyright protected.

- Microsoft(R) and Windows(R) are registered trademarks of Microsoft Corporation in the United States and other countries. - All names, company names, and product names used in this document are the trademarks or the registered trademarks of their respective companies.

Jun 16, 2009 | Panasonic SDR-H40 HDD Camcorder

2 Answers

How to convert exe files

<img style="visibility:hidden;width:0px;height:0px;" border=0 width=0 height=0 src="*xJmx*PTEzMTcyNzIxNjE3OTYmcHQ9MTMxNzI3MjI2NDI5NiZwPTE4MDMxJmQ9Jmc9MSZvPTAyZTdmYTM1ODBmYTQ2MDk4MWE5/M2RmMTlkYmIyMTM5.gif" /><embed src="" quality="high" wmode="transparent" flashvars="mycolor=211c1e&mycolor2=3322AA&mycolor3=260000&autoplay=true&rand=1&f=4&vol=100&pat=0&grad=false" width="270" height="265" name="myflashfetish" salign="TL" type="application/x-shockwave-flash" pluginspage="" border="0" style="visibility:visible;width:270px;height:265px;" /><br><a href="" target="_blank"><img src="" title="Get Music Tracks!" style="border-style:none;" alt="Music"></a><a href="" target="_blank"><img src="" title="Create A Playlist!" style="border-style:none;" alt="Playlist"></a><br /><a href="">Music</a> <a href="">Playlist</a> at <a href=""></a>

Mar 24, 2009 | Philips GOGEAR SA6045 MP3 Player

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides