Question about KitchenAid KHWS01PWH Global Horizontal Axis Washer

1 Answer

KitchenAid Washing machine stops mid-cycle and stays stopped

I have a KitchenAid washing machine (Model number KAWE577B) that stops mid-way through the wash cycle and I have to "bang" on the lid to get it to resume. Once it does, it finishes without a problem and washes fine. It just seems that something is loose or stuck that keeps it from clicking through to the next step in the cycle. Thanks!!

Posted by on

  • dukeoutdoor Jun 14, 2008

    Thanks for the help!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • KitchenAid Master
  • 2,651 Answers

Sounds like you need to replace your lid switch asssy part number 285671, unit not recognizing the door closed so for safetyreasons stops after first rinse and wont drain/spin. your tripping the switch by bangin on it

Posted on May 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Its stops when it reaches in 39 minute the function set on cottons what is the problem


Try resetting the mainboard by removing the wall plug overnight. May also be a faulty lid switch if it is a top loader.

  • Hello, my washing machine stops completely when it reaches ... www.shopyourway.com > Manage My Life > Questions ... my washing machine stops completely when it reaches the pause cycle, ... Answered in 5 minutes ... Kenmore washing machine 417 44252500.
  • Washing machine stops mid cycle - White Goods Help www.whitegoodshelp.co.uk > ... > DIY Washing Machine Repair Help Possible causes when washing machine stops mid cycle by a repairman with 30 years experience.
  • What could cause my washing machine to stop before the ... diy.stackexchange.com/questions/21181/what-could-cause-my-washing... What could cause my washing machine to stop before the ... i.e. it never reaches the end of the cycle ... What would cause my washing machine to stop at the rinse ...
  • Washer Stops Mid Cycle - Repair Parts - RepairClinic.com www.repairclinic.com/...A-Washing-Machine/50---/Washer-stops-mid-cycle ... listed below for the symptom Washer stops mid cycle are ordered from most likely to least likely to occur. ... Electrolux Front Load Washing Machine Disassembly
  • once my washing machine reaches the rinse cycle, about 3 ... https://answers.yahoo.com/question/index?qid=20080526150940AA3izVT
    • RESOLVED
    • 6 POSTS
    • 5 TOTAL ANSWERS
    2008-05-26 · Once my washing machine reaches the rinse cycle, about 3 minutes after ... Once my washing machine reaches ... My washing machine stops after the ...
  • Common Problems to all Washing Machine Brands ' Washing www.appliancerepair.net/washing-machine-repair-2.html Washing machine designs vary widely, ... but stop agitating after a few minutes and fill some more. ... stop the spin cycle and unplug the washer.
  • My washing machine will not spin and now it does not stop ... www.shopyourway.com > Manage My Life > Questions My washing machine will not spin and now it does not stop when it reaches the water level. ... Answered in 5 minutes
  • washer stops in the middle of washing cycle - Appliance ... forum.appliancepartspros.com > ... > Washer Repair
    • 6 POSTS
    • FIRST POST: 2012-02-07
    2012-06-22 · Appliance Repair Forum > Appliance Repair Help > Washer Repair » washer stops in the ... but when the timer reaches 24 minutes left to ... Washing Machine stops ...
  • LG Washer Stuck Timer 2 - YouTube Youtube
    • BY SBUBANDIT
    • 14 MIN
    • 4.9K VIEWS
    2012-08-29 · Video embedded · In this video the washer display shows 8 minutes remaining in ... machine stops and turns ... 10kg Top Load LG Washing Machine


  • http://www.bing.com/search?q=washing+machine+stops+when+it+reaches+39+minutes&qs=n&form=QBRE&pq=washing+machine+stops+when+it+reaches+39+minute&sc=0-47&sp=-1&sk=&cvid=04BC47135B524BD8B5BAC3759F010C1B

    Jun 10, 2016 | Washing Machines

    1 Answer

    Doesn't work. Why does it stop mid-cycle?


    washing machine stopped mid cycle, won't drain : DIY - Reddit

    https://www.reddit.com/.../washing_machine_stopped_mid_cycle_...

    RedditSep 3, 2014 - helpwashing machine stopped mid cycle, won't drain (self.DIY). submitted 1 ... I get home. Any ideas on how I can just drain the water out of it?

    Troubleshoot - washer stops mid cycle, won't drain or spin ...

    ? 1:58
    https://www.youtube.com/watch?v=6Gc0ZgLD6a4
    Jun 20, 2012 - Uploaded by searspartsdirect
    Troubleshoot - washer stops mid cycle, won't drain or spin .... I agree, this was not helpful, and did not address the no spin issue. like thanks. ... how to fix a Kenmore / whirlpool washing machine that wont drain agitate or spin ...

    Washing machine stops mid cycle - White Goods Help

    www.whitegoodshelp.co.uk > ... > DIY Washing Machine Repair Help
    Sep 9, 2013 - Possible causes when washing machine stops mid cycle by a ... If thewashing machine can't drain the water out then it will stick on the rinses, ...

    Why does my washer stop half way through cycle - Ken



    Dec 18, 2015 | Washing Machines

    1 Answer

    W6444


    make this steps and fix it. God bless you

    Lid Switch Assembly

    If the washer stops mid cycle the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Door Lock Motor and Switch Assembly

    If the washer stops mid cycle the door lock assembly should be checked. The door lock can fail either mechanically or electrically. Test any switches on the door lock with an Ohm meter. The switches should have continuity according to their design.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Water Inlet Valve

    If the washer stops mid cycle the water inlet valve cold water side may have failed. Most washers have a cold water rinse and so if they can't fill with cold water they just sit indefinitely waiting for the cold water to enter. If there is cold water to the water inlet valve and the cold water works in other parts of the cycle - or to make warm water - the valve is not the problem.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Main Control Board

    If the washer stops mid-cycle the main control board might be defective. This is not common. Check other causes first such as the lid or door switch and other components.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Timer

    If the washer stops mid cycle the timer might be defective. This part is often misdiagnosed, check other components before replacing this timer.

    Jul 25, 2013 | Washing Machines

    1 Answer

    Washer stops between wash and rinse, and stays full of water. ld code


    see this steps and fix it. God bless you


    Lid Switch Assembly

    If the washer stops mid cycle the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Door Lock Motor and Switch Assembly

    If the washer stops mid cycle the door lock assembly should be checked. The door lock can fail either mechanically or electrically. Test any switches on the door lock with an Ohm meter. The switches should have continuity according to their design.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Water Inlet Valve

    If the washer stops mid cycle the water inlet valve cold water side may have failed. Most washers have a cold water rinse and so if they can't fill with cold water they just sit indefinitely waiting for the cold water to enter. If there is cold water to the water inlet valve and the cold water works in other parts of the cycle - or to make warm water - the valve is not the problem.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Main Control Board

    If the washer stops mid-cycle the main control board might be defective. This is not common. Check other causes first such as the lid or door switch and other components.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Timer

    If the washer stops mid cycle the timer might be defective. This part is often misdiagnosed, check other components before replacing this timer.

    Jul 21, 2013 | Kenmore Washing Machines

    1 Answer

    The washer work but stop along the way,ie unable to complete the circle


    see this steps and fix it. God bless you

    Lid Switch Assembly

    If the washer stops mid cycle the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Door Lock Motor and Switch Assembly

    If the washer stops mid cycle the door lock assembly should be checked. The door lock can fail either mechanically or electrically. Test any switches on the door lock with an Ohm meter. The switches should have continuity according to their design.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Water Inlet Valve

    If the washer stops mid cycle the water inlet valve cold water side may have failed. Most washers have a cold water rinse and so if they can't fill with cold water they just sit indefinitely waiting for the cold water to enter. If there is cold water to the water inlet valve and the cold water works in other parts of the cycle - or to make warm water - the valve is not the problem.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Main Control Board

    If the washer stops mid-cycle the main control board might be defective. This is not common. Check other causes first such as the lid or door switch and other components.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Timer

    If the washer stops mid cycle the timer might be defective. This part is often misdiagnosed, check other components before replacing this timer.

    Jul 13, 2013 | Washing Machines

    1 Answer

    Skipping wash cycle


    follow this steps and fix it. God bless you

    Lid Switch Assembly

    If the washer stops mid cycle the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Door Lock Motor and Switch Assembly

    If the washer stops mid cycle the door lock assembly should be checked. The door lock can fail either mechanically or electrically. Test any switches on the door lock with an Ohm meter. The switches should have continuity according to their design.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Water Inlet Valve

    If the washer stops mid cycle the water inlet valve cold water side may have failed. Most washers have a cold water rinse and so if they can't fill with cold water they just sit indefinitely waiting for the cold water to enter. If there is cold water to the water inlet valve and the cold water works in other parts of the cycle - or to make warm water - the valve is not the problem.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Main Control Board

    If the washer stops mid-cycle the main control board might be defective. This is not common. Check other causes first such as the lid or door switch and other components.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Timer

    If the washer stops mid cycle the timer might be defective. This part is often misdiagnosed, check other components before replacing this timer.

    Jul 13, 2013 | Admiral 3.4 cu. ft. Top Load Washer in...

    1 Answer

    Affinity stops in the middle of a cycle a just shuts off no signal or anything?


    use the following steps. God bless you

    Lid Switch Assembly

    If the washer stops mid cycle the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Door Lock Motor and Switch Assembly

    If the washer stops mid cycle the door lock assembly should be checked. The door lock can fail either mechanically or electrically. Test any switches on the door lock with an Ohm meter. The switches should have continuity according to their design.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Water Inlet Valve

    If the washer stops mid cycle the water inlet valve cold water side may have failed. Most washers have a cold water rinse and so if they can't fill with cold water they just sit indefinitely waiting for the cold water to enter. If there is cold water to the water inlet valve and the cold water works in other parts of the cycle - or to make warm water - the valve is not the problem.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Main Control Board

    If the washer stops mid-cycle the main control board might be defective. This is not common. Check other causes first such as the lid or door switch and other components.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Timer

    If the washer stops mid cycle the timer might be defective. This part is often misdiagnosed, check other components before replacing this timer.

    5df92395-72cf-4824-8843-aff749d310c8.gif6271898b-c716-46bf-8d1a-8d8745766aab.gif

    May 23, 2013 | Frigidaire ATF6000ES Front Load Washer

    1 Answer

    Washer heavy duty cycle issue


    Lid Switch Assembly

    If the washer stops mid cycle the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Door Lock Motor and Switch Assembly

    If the washer stops mid cycle the door lock assembly should be checked. The door lock can fail either mechanically or electrically. Test any switches on the door lock with an Ohm meter. The switches should have continuity according to their design.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Water Inlet Valve

    If the washer stops mid cycle the water inlet valve cold water side may have failed. Most washers have a cold water rinse and so if they can't fill with cold water they just sit indefinitely waiting for the cold water to enter. If there is cold water to the water inlet valve and the cold water works in other parts of the cycle - or to make warm water - the valve is not the problem.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Main Control Board

    If the washer stops mid-cycle the main control board might be defective. This is not common. Check other causes first such as the lid or door switch and other components.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Timer

    If the washer stops mid cycle the timer might be defective. This part is often misdiagnosed, check other components before replacing this timer.

    God bless youcb4af627-0171-42f5-ad0a-5f8e85e72ae0.gif6634bf88-8eca-4d0f-b59c-0e8829e5d59d.gif419f93c3-fea0-4d93-af85-2e59d98d88e0.gif

    May 23, 2013 | Whirlpool AWG320 Front Load Washer / Dryer

    Not finding what you are looking for?
    Washing Machines Logo

    Related Topics:

    1,031 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top KitchenAid Washing Machines Experts

    gbob59

    Level 3 Expert

    2963 Answers

    thinksewfast

    Level 2 Expert

    81 Answers

    Brad Brown

    Level 3 Expert

    13569 Answers

    Are you a KitchenAid Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...