Question about 3M Volition Networking Switch

1 Answer

Ping to my device via network

Hi Sir,

I have a network device, when I link it to our company network, it can't be pinged from another PC on the same network. but when I link it with linksys switch, no problem at all. I got IP, netMask, gateway addr from our IT deparment, all these address are valid. what could be the problem?

Posted by on

  • 1 more comment 
  • qfchen May 12, 2008

    network problem with cisco switch

  • Colin Wright
    Colin Wright May 11, 2010

    Have you asked the IT department if ping is something their network allows ?

  • Jason May 11, 2010

    The reason it's getting information from the linksys is b/c the linksys is acting as a DHCP server. What are you connecting it to on the company network?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

They are correct a lot of networks will block an echo request or a "ping" because or security and bandwidth issues. Just because your device will not pint doesn't mean its not on the network. I would check with your IT department.

Posted on May 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have small network in an office, with 8 - port Ethernet switch. after buying two new PCs, i have tried to expand the LAN by adding another switch and i couldnt dont know why. i have connected the two...


Sir your computers are not in the same workgroup that's why coundn't ping the computer please open up *my computer then right click in it and go properties then on to the computer name > network id at the right side of that properties then add you network name what ever your have then it will work properly
( Note: do these things on that computers which is connected to the other port)
Thank you

Mar 29, 2012 | D-Link DES-1008D 8-Port Ethernet Switch...

1 Answer

I have installed dlink 1016 10/100 Switch I have two computers and one dsl router connected to this switch but i am facing slow internet problem. when i connect my pc directly with router it works fine...


you'll probably find the router is set up to ignore ping requests, most are by default, for better results, try pinging a website and compare the results both with and without the switch. The switch shouldn't make any noticable difference to your connections, I use one and there's not perceivable difference in performance.

Apr 19, 2011 | D-Link DES 1016D (DES-1016D) 16x10/100...

1 Answer

LAN Network, both PC's with static IP's and defaullt and DNS addresses are 192.1683.1.1 tried the other defaults. Both machines connected. when i ping each others IP's request timed out. please help


Hi,
Can not really understand what exactly you have done. Please try the following steps:
1. Assign static IP on pc 1 as 192.168.1.2 assign subnet mask as 255.255.255.0. 2. No need to assign default gateway and DNS. 3. Assign static IP on pc 2 as 192.168.1.3 assign subnet mask as 255.255.255.0. 4. No need to assign default gateway and DNS.
Open dos and try to ping. In case if the ping fails then disable all the firewall on both the pc's and try again.
If you are running windows vista then in network and sharing center make sure network discovery and file sharing is enabled.
Regards,
Rashish

Aug 06, 2010 | Accton CheetaHub Classic 2040 Networking...

1 Answer

Problem Dell PowerConnect 6248


go to the web interface and disble storm control and flow control

Dec 08, 2009 | Computers & Internet

1 Answer

I have now idea how to use it


this is compaq ethernet hub and very easy to use.

just powerup this hub nad give ip to each PC or laptop and connect through CAT5 or CAT6 cable .To ensure connectivity ping PC and laptop .

its working fine.

Apr 24, 2009 | Compaq Netelligent 2016 (267046-001)...

1 Answer

Di-524 to netopia 2210-02 wan drop


set a pc inside the network to issue a "ping" command to any website every 5 mins. that will keep the link alive. you can either write a script or use a program such as ws watch.

Dec 04, 2008 | Computers & Internet

1 Answer

About connectivity problem


Sir please use a router where you can connect all your switch's. However router needs to be configured properly based from your internet type and settings

Nov 04, 2008 | D-Link DES-1008D 8-Port Ethernet Switch...

1 Answer

Networking


The computer you are conserned about most likely doesn't receive DHCP, but either manually configured or gets the APIPA. The best way to check if that is the case to run ipconfig /all in command prompt.If adress starts at 169. search for break in line. If it is some manual configuration change it in TCP/IP in network connections properties. Have fun.

Jul 01, 2008 | Trendnet TEG-224WS 24-Port Ethernet Switch...

6 Answers

DLINK SWITCH DES-1008D


other units cant connect to my installed port hub and were having hight mare connecting it

Apr 09, 2008 | D-Link DES-1008D 8-Port Ethernet Switch...

1 Answer

Connecting 2 PCs Via the D-Link Hub


Hi Ajog,

Those Ips look good. Make sure the Subnet on both is 255.255.255.0. Since they are both getting to the internet, I assume the Gateway IP is correct.

On the 192.168.1.3, got to Start>Run and type in CMD. A black window will open, and type in PING 192.168.1.65. You should get four responses. If you don't, you probley have a firewall issue.

Do that same on the 192.168.1.65 machine, back to the 192.168.1.3 machine.

On the XP machine, follow these instruction, just skip down to Step 9.
http://www.geekgirls.com/windowsxp_home_network.htm

Vista gets a little tricker, but not bad. To setup the network on the Vista machine, go here, ad click on the Network icon.
Great link to save to your desktop!

http://windowshelp.microsoft.com/Windows/en-US/default.mspx

Using the network wizards should setup your firewalls to allow File and Printer Sharing.

Good luck

Jan 08, 2008 | D-Link DE 805TP/C (DE-805TP/C) Networking...

Not finding what you are looking for?
3M Volition Networking Switch Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top 3M Computers & Internet Experts

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

NIK
NIK

Level 2 Expert

206 Answers

Raj Patel

Level 3 Expert

847 Answers

Are you a 3M Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...