Question about Hitachi 53UDX10B 53" Rear Projection Television

1 Answer

Hello Recently my Hitachi 53uwx10ba ultravision, went blank, I am curious if you have any possible soultions. Here is wha happened one day we came home and the TV would not turn on, the red light on the front of he tv was on but that was it, I can here some clicking inside the tv when I try to turn the tv on but that is it, I thought it might be the bulbs but not sure, also there is no sound when we try to turn it on, so that makes me think that is something else, if you can help I would appreciate it very much, again Thank you Dustin Offerdahl

Posted by on

  • bumos28 Nov 10, 2008

    mine does the same thing where are the things we are supposed to check

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hitachi Master
  • 8,617 Answers

The clicking is the relay. I would suggest checking the voltage regulators and horizontal output transistors

Posted on May 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV Exploded


Sounds like the DLP lamp failed. You can decipher the Hitachi flashing red light. That should help to be sure.
The DLP lamp replacement is fairly straightforward and can be done with minimal tools

Sep 10, 2009 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

Hitachi 53uwx10ba turns on & off when off red flashing light/clic


Same problem. Replaced both convergence ICs about 5 months ago. Worked fince since then and just recently no sound, no video, blinking red on front panel and clicking sound. I suspect that the ICs went bad again and blew a resistor or two. I used cheap Chinese ICs instead of the Sanyo ones and thing this is why. I'll be looking at it again and post solution.

Jan 21, 2009 | Hitachi 50SBX78B 50" Rear Projection...

2 Answers

Hitachi 60vf820 ultravision


Good Day, bgblueeyess;
Your somebody is wrong; replace the LAMP.
Good Luck, big IRISH.

Aug 04, 2008 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

PROJECTION TV HITACHI ULTRAVISION COLOR CONVERGENCE PROBLEM


it sounds like your blue convergence ic is getting weak you need to replace the ic's STK392-110 and you should replace both because when 1 is bad the other will go real soon. They are inexspensive at the sight I posted and you will also get free tech online support if you purchase them there.
http://servicemanuals.vstore.ca/

Apr 12, 2008 | Hitachi 53UDX10B 53" Rear Projection...

2 Answers

Hitachi 53uwx10ba no sound/picture flashing power light cricket sound


Possible shorted cap C702 ? Open E994 pico fuse.....check
carefully with ohmmeter...all fuses and let me know.....T.

Mar 05, 2008 | Televison & Video

3 Answers

Hitachi ultravision tv


tv comes on ,i hear but can not see

Dec 27, 2007 | Hitachi 50UX58B 50" Rear Projection...

1 Answer

I have a 50 inch hitachi ultravision that has no picture or sound but power light is on


you have lookse connection on the video convergance amp ic

KIT10 $29.50
Repair Kit for Hitachi convergence Chassis DP-14G
KIT10 Includes 2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors:


http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Nov 04, 2007 | Hitachi UltraVision CineForm 55VG825 55"...

6 Answers

Problem in Hitachi 53UWX10BA


The convergence ic's, and related components that could'be affected need to be replaced cost to repair 250.00 2hrs job max with alignment this depending on the tech. If you need more help let me know

Jun 14, 2007 | Hitachi 53UDX10B 53" Rear Projection...

Not finding what you are looking for?
Hitachi 53UDX10B 53" Rear Projection Television Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69878 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...