Question about D-Link Xtreme N DIR-655 Wireless Router

1 Answer

All I did was reset my Router Now it says i'm coneccted but nothing.

I keep getting hung up on because I think i'm not under warranty. They want me to upgrade firmware but it comes in a bin file that I don't know how to open. Please help me if anyone can thanks.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • D-Link Master
  • 6,487 Answers

You need to access the router setup page:
To access the configuration utility, open a web-browser such as Internet Explorer
and enter the IP address of the router (192.168.1.1).
Type “admin” for the User Name and “admin” in the Password field.

To access the FIRMWARE UPDATE setting window, click on the Firmware Update button under the MAINTENANCE tab.
FIRMWARE UPDATE
To update firmware, click on the Browse… button to
search for the file and then click on the Update
Firmware button to begin copying the file. The Router
will load the file and restart automatically.

Posted on May 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I dont know the code forgot the code for other computers to get conecct like a ipone for the computer


Hi,

Welcome to Fixya. If you forgot the code or the Network Key (Passphrase) we can access the Wireless Settings Page of the router to obtain the information needed to connect your iphone.

To access the router page you need a working computer that is connected to the router. To access your router you need to use a computer that is connected to it. Open a Browser then type 192.168.0.1 or http://routerlogin.net. The Default username is admin and the password is password. Password is case sensitive.

Go to the Wireless Tab select Wireless Security under the Security Mode you will see there Network Key or Passphrase. The Network Key serves as a password or security code on your network to make it secure. Network Key is case sensitive.

Don't forget to say thanks. Thanks for using Fixya

Feb 07, 2011 | NetGear Routers

1 Answer

Router just has an orange power light and does nothing else


Hi Challywags,

Normally if the router's power light is orange, red, or blinking there is problem with it's software/firmware. Or in some worst cases, it might also be a faulty unit already.

Here are things that you can try:

* Unplug it and wait for 1 minute before powering it on.
* Reset the router using the reset button. Note, this will restore the default settings configured in your router. You may need to reconfigure the router after doing this.

In case none of the solutions above will work, and none of these steps will turn the power light green I recommend that you contact the router's manufacturer for further troubleshooting. If the device is still under the warranty you will be able to get it replaced.

Jun 17, 2010 | D-Link DIR-615 Wireless Router

1 Answer

I cant connect my laptop to my DI-524 router after I reset router


To configure wireless:

1. Open browser, type "192.168.0.1" under the URL and press Enter

2. Username & password will be prompt
Username = admin
Password = by default is empty

3. Once entered inside the router config, on your left u can see a wizard tab, just click on it and follow the on screen instruction.


Mar 10, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Router problems


Try to reset again the router follow this steps in resetting it, Press and hold the reset button of the router for 30 seconds while the power is ON , then after that unplug the power of the router for 10 seconds and check if all the lights are now back to normal if still no and router is still under warranty better have it replace because router is already bad........

Nov 03, 2008 | Dell TrueMobile 2300 Wireless Broadband...

1 Answer

Belkin Router


If you cannot even ping the router IP address the next step that you can do here is to reset the router , To reset it press and hold the reset button for 30 seconds then after that try to ping the router again, if still not able to ping it, I will advcie you to call Belkin so they can wlak you through in checking this router and since its only about a year I think its still under warranty so they can still replace it incase the router is bad already....

Hope that helps...........

Sep 09, 2008 | Belkin (F5D7230-4) Router (587009)

1 Answer

Router keeps having to be reset


jbsta, the best move at this point is to consult the warranty status of your router, you may call Linksys' toll free number at 1-800-546-5797 option 3

Jul 31, 2008 | Linksys Wireless-G WRT54G Router

4 Answers

I have a belkin n wireless router keeps freezing


First step of solution would be performing Reset. Press and hold the reset button about 30 seconds and release. Check again. If you need customized settings just type 192.168.2.1 in your browser and get into settings.

If issue persist please post for further troubleshooting.

Good Luck

Jan 24, 2008 | Belkin (F5D7231-4) Wireless Router

Not finding what you are looking for?
D-Link Xtreme N  DIR-655 Wireless Router Logo

Related Topics:

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Mike

Level 3 Expert

4331 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a D-Link Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...