Question about Panasonic Office Equipment & Supplies

1 Answer

I have a panasonic projector model no.PT-AX100E. It is currently turning it self off after about a minute when i turn it on. There are no flashing on the lamp or temperature leds. The lamp has about 1100 hours of usage. I have also cleaned the filter but thios has not solved the problem. What could it be.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Enter the service menu under self check and you will most probably see that the fault is cause by the iris (will be in red). The iris needs to be oiled so that it can open and close again properly (you can find a youtube video showing you how to do this).

Enter Service menu like this:

From the projector being on, press the power button to turn it off then press:

Cursor left
Cursor up
Cursor down
Cursor up
Cursor down
Enter

Posted on Sep 20, 2010

  • skelectri898 Sep 24, 2010

    Didnt use the projector for about 2 weeks then your suggestion turned up. Turned the projector on and it seems to be woking fine. Still tried your suggestion and it said the iris was ok. Sooooo I dunno, I'll try it tonight and see how we go.

  • mnash1234 Sep 24, 2010

    This is typical behaviour. I am sure that the auto turn off will happen again. Here is a good linkhttp://www.youtube.com/watch?v=6jGwB05_g... for solving you problem. If your a practical person you will find it no problem. I had to do it on my beamer at 600 hours, but since then it has worked like new.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My name is Callie and my panasonic PT-60LCX64 projector tv wont turn on. I can hear it running and hear the fan, and read about a switch that needs to be pressed in but i cant find the switch.


PT-60LCX64 - Panasonic

shop.panasonic.com > Get Support

Panasonic60" Diagonal LCD Projection HDTV. ... Details http://shop.panasonic.com/support-only/PT-60LCX64.html ... Will the Touch Pen (TY-TP10U) work with my TV?

Panasonic TV Not Turning On? (PT-60LCX64)? ' Yahoo Answers

https://answers.yahoo.com/question/index?qid...
Jul 13, 2010 - When I power the TV on, the green light flashes for about a minute, and ... Source(s): panasonic tv turning pt 60lcx64: https://tr.im/EBjDN ... I have apanasonic tv PT-56lCX66 and it wont turn on? Why won't my Panasonic PT-52lcx16TV turn on? Panasonic lcd rear projection 60 inch tv..model #PT-60LCX64.

Panasonic PT60LCX64 Lamp with Housing TY-LA1000

www.amazon.com > ... > Projector Accessories > Lamps

Amazon.com, Inc.
Rating: 3.8 - ‎30 reviews
PANASONIC PT-60LCX64 TV Replacement Lamp with Housing ... Howere, EVER TIME we turn the TV On a Pop Up Message comes up to Set a Lamp Timer!

Panasonic LCD Projection 1 Orange Amber Blink PT 43 50 ...

? 5:48
https://www.youtube.com/watch?v=Z9tLqxpD1qU
Apr 18, 2013 - Uploaded by norcal715

Dec 26, 2015 | Panasonic Televison & Video

1 Answer

Panasonic PT-AE700E projector light does not turn on, instead the fan runs on high for an infinite time until turned off


1,Check the fans ,whether the fan is running,when you turn on the projector
2,if the fans run, then ,check the lamp or lamp ballast

We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry Lampdeng Limited

May 04, 2013 | Panasonic PT-AE700E Projector Lamp

1 Answer

Projector turn off into two minutes and do not turn on


If the Panasonic Logo comes and then the projectors turns off, the main board of the projector requires replacement!

Dec 27, 2012 | Panasonic PT-AE3000U LCD Projector

1 Answer

Panasonic PTAE 900U with new lamp and counter reset shut off


Reseat the lamp.  I had a similar problem.  Replaced the lamp and everything worked for about 3 hours.  Then, turned the projector off.  Next morning, when I turned it on, nothing.  Stanby/On light flashed green for a minute then the lamp light came on and the projector went into standby.

Jan 27, 2009 | Panasonic PT-AE900U Multimedia Projector

1 Answer

Panasonic PT L501u Replacement Lamp


panasonic projectors , even if the lamp has reached end of life gives u 10 minutes to reset the lamp counter
so when u replace a new lamp, go to options, lamp counter, reset & press stanby button for confirmation!
thats all the unit powers off & when u check the lamp counter , its shows 0
u r done!!!!!!

Jan 22, 2009 | Panasonic PT L501U Multimedia Projector

1 Answer

PT-L785U Projector


if the lamp warning light is flashing, this indicates a defective ballast (lamp power module). if the lamp warning light is lit steadily, then the lamp would be at fault.

Oct 13, 2008 | Panasonic PT-L785U Multimedia Projector

2 Answers

Panasonic projector PT-AX100E (PTAX100U) shuts down every few minutes, must be re-started several times before it will stay on for good.


Problem is the dynamic iris its broken. The only solucon is to change it so get the projectorn to the nearest panasonic sevice and thety will fiks it on waranty

Jun 07, 2008 | Televison & Video

1 Answer

Projector self power off


Have you tried looking to see if the lamp has expired? Or could simply be cause by a faulty power supply unit?

Jan 13, 2008 | Office Equipment & Supplies

2 Answers

Panasonic PT-L759U


With the power on and the lamp off, hold the input button down on the projector then press and hold the power button for 5 seconds

Nov 16, 2007 | Panasonic PT-AE900U Multimedia Projector

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

1,215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Mitch S
Mitch S

Level 1 Expert

25 Answers

Are you a Panasonic Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...