Question about Akai Mpc1000 Music Production Center

1 Answer

Good evening, I have an MPC1000 with JJOS and was trying to save a beat and it just froze. Then I got an error message. I turned it off and on and it froze during A.Load. I took out the mem card and it loaded the internal seq's/samples fine. I've had this machine for 3 yrs with no problems...Please HELP!!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Akai Master
  • 5,603 Answers

I would look for either corruption of the file you loaded or attempted to save or if it might be too big to store in the unit.

It might be the memory card was not properly formatted for the machine.

A real problem is those who try to use a memory card that is bigger than the machine allows. MANY of them allow ONLY a 2 GB card maximum. If one tries to use a larger the units will freeze. Check that your card is listed as compatible as many, even the correct size, are not fully compatible.

Posted on Sep 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mpc 1000 loud static


Maybe try adjusting the MASTER level?

Good Luck

Other settings
Adjusting the master level You can adjust the level of the headphone and the stereo out by turning the MAIN VOLUME knob. The MAIN
VOLUME changes the analog signal level. This will also adjust the entire level of the MPC1000 digitally.
01. Press the [MODE] key and then the [PAD 10] (OTHER).
It switches to the OTHER mode.
02. Press the [F1] (GLOBAL) key.
The GLOBAL page will be displayed.
03. In the Master level field, set the level.
You will set the digital signal level, which will be sent out to the DA converter. The MPC1000 can output up to
32 sounds simultaneously. There is the great difference in the level when you play single sample and play 32
sounds. If you increase the value in the Mater level field, you can increase the entire level of the MPC1000 to
create more powerful sound with less noise. However, if you playback many sounds at the same time, the
level may be overloaded, which may cause distortion. If you decrease the value in the Master level field, you
can prevent distortion when you play many sounds at the same time. However, you cannot have a good
result in respect to the noise or punch of the sound. Set the appropriate value in the Master level field
depending on the application.

Mar 31, 2014 | Akai Mpc1000 Music Production Center

1 Answer

How to repeat a beat?


You directed this question at me, but unfortunately this isn't my expertise and I am unable to provide you with a real solution at this time.

Hopefully one of other experts will be able to provide you with a real solution.

Thank you for using FixYa.

Dec 25, 2011 | Casio Music

1 Answer

Hello, Im trying to install beat box anthology. when doing so i receive an error code -36. how do i resolve this problem?


First thing when getting an error message on install is to VERIFY the system requirements meet that specified by the software you are installing.
I am sure you looked for a "troubleshooting guide" in the index of your manual.

Feb 15, 2011 | Ultimate Sound Bank Beat Box Anthology...

1 Answer

My Zoom h4 has been struggling for a couple months now. Most of the time I get either an error message concerning the card or saying the card is full. Even when the card has been reformatted both on my pc...


Make sure the batteries are good... some people try to use re-chargeable batteries and because of their lower voltage they cause problems. First thing is to try new batteries.

Feb 12, 2011 | Zoom H4 Handy Recorder

1 Answer

Akai MPC 1000 is stuck in USB mode


I'm having the same problem. This is my second MPC 1000 and my first one didn't have this problem. I bought one of the first one-thousand MPC 1000's sold in the US. I loved it. I sold it for rent, boo hoo. I'm glad to have another one back in my life. But sad to see it having issues already. I've only had it for a week. I have emailed Akai regarding this issue. I'll post pack here if they give me a good fix.

Mar 25, 2010 | Akai Mpc1000 Sampling Music Production...

1 Answer

Looking for akai mpc2000 part/n s-11114b * 20 pcs


Try http://www.akaipro.com/content1024 Contact them for the nearest parts distributor.

Jul 15, 2009 | Akai Mpc1000 Sampling Music Production...

1 Answer

I can't get my mpc 1000 to play chopped samples on the pads


Have you checked it out from the manual. If you have get in touch with www.akai.com and ask them. they are the manufacturer and YOU ARE THE CUSTOMER.
Good Luck

Jul 05, 2009 | Akai Mpc1000 Sampling Music Production...

1 Answer

Is it a bad idea to fly with my akai mpc 2000?


Good idea to carry it with you. Fluctuating barometric pressure will not affect it.

May 27, 2009 | Akai Mpc1000 Music Production Center

Not finding what you are looking for?
Akai Mpc1000 Music Production Center Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Music Experts

T-Comtech Repairs
T-Comtech Repairs

Level 2 Expert

417 Answers

ray gallant

Level 3 Expert

41378 Answers

Are you an Akai Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...