Question about Washing Machines

2 Answers

Indesit wd12x operating instructions wanted

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Indesit WD12X - will not take in hot water, coil is open circuit, trying to find replacement

Posted on Feb 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My WD 12X machine is not drying the clothes. They get hot but not dry. Is there a filter somewhere that needs to be cleaned?


Presuming that this is an Indesit WD12X.

Yes, there is a filter at the bottom left of the machine (It can be clearly seen in the illistration on Page 14 of the manual, figure 6).

If you don't have a manual, you can download a PDF of it here:
http://www.indesit.co.uk/indesit/_pdf/manuals/19503326500_UK-USA-AUS.pdf

It's highly likely that the water isn't getting evacuated because the filter is blocked and so there is just too much water to dry. Unscrew the filter, clean and replace. I'm amazed to discover that (so far as I can see) The manual never even mentions the filter! Well done Indesit

Jul 19, 2011 | Washing Machines

1 Answer

Indesit washing machine wd12x manual


Go to the following site.

WWW.INDESITSERVICE.CO.UK

In the menu on the left, click on---INDESIT USER MANUALS.

Then in the search box, enter your model number, and downloat the instructions.

Dec 06, 2010 | Washing Machines

1 Answer

I have a 2 year old indesit wd12x been fine


could be the catch has broken you may have to force it open and new complete door is about £25.00

Mar 01, 2010 | Washing Machines

1 Answer

The dial stops on 2 will not spin or empty when switched manually it move round like a second clock through the programes. I have had the pcb. board checked by post with Q E R and they say its ok.INDESIT...


hello any spin problem can be down to the module board the fact you've had turn the dial which is the programmer sound like this is the fault if this is the case you may need to be looking for new washer. sorry to be negative i hope you find a solution

regards
shaun

Feb 28, 2010 | Indesit W 123 Front Load Washer

1 Answer

Where can i buy a door seal for an indesit wd12x


If you are in the u/k, then try yellow pages for washing machine repairers, or go to WWW.INDESIT.CO.UK, Then go to :after sales.
Please rate my solution.
Thanks.

Aug 11, 2009 | Indesit W 123 Front Load Washer

1 Answer

Indesit washing machine not spinning - fault code timer and dor lock light flashing


my indesit washer/dryer wd12x programme dial goes all the way when it reaches spinning

May 30, 2009 | Indesit W 123 Front Load Washer

1 Answer

Rumbling bearings indesit wd12x


It is a normal right hand thread, what you need to do is to apply heat to it with a blow torch,this wiil expand the metal , and should enable you to unscrew it.
Plz rate my solution.
Thanks.

Jan 11, 2009 | Indesit Washing Machines

1 Answer

Broken handle


patience and an empty house got the job done try it yourself throw wife and kids out it works a treat

Dec 09, 2008 | Indesit W 123 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

1,485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...