Question about Kodak EasyShare M853 Digital Camera

2 Answers

KODAK LENS ERROR 122 1 0 0

CAN YOU PLEASE HELP ME OUT OF NOWHERE MY CAMERA SAYS LENS ERROR 122 1 0 0

Posted by on

  • Kuh-Ayla Jun 13, 2008

    i had my camera & it was working perfectly fine. i have no idea what happened because all of the sudden the lens wouldnt go in correctly all of the way. the lens looks kinda jammed & 1 end is out farther than the other. when i cut it on it read error 122 1 0 0. Pleeeeeeeeeeeesase!! help me!

  • pelupear Feb 10, 2009

    Hello, I have a Camera Kodak EasyShare M753, the display says Error 122.1,0,0.

    I bought it 4 months ago.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If your looking where it says lens error 122 then when you turn it on it will say it i have the same problem but worse

Posted on May 25, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Go to kodak.com and review the product troubleshoot. hope it works out
My easy share lens got damaged and i never used it. i got a raw deal i suppose, take care of your cam., and keep it in the recommended kroo case

Posted on May 15, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem with Kodak EasyShare M753 My camera was working just fine before but then i try to turn my camera on and i get camera lens error 122 1,0,0 the lenses look crooked and after i try to turn it on it...


You can try to pull and twist on the lens as you turn it on. Sometime this will work. Do it carefully.
Sometimes the lens jumps out of the track, and may be able to be put back with some careful help.

If not, sell as a used as is or repair camera on a site such as Amazon on Ebay.

Jul 10, 2011 | Panasonic Lumix DMC-TZ3 Digital Camera

1 Answer

I have a kodak easyshare c182 camera. i dropped it and now it says lens error 122 then shuts right back off.. the lens wont go back in.. its stuck.. please help!!!! i just bought it 4wks ago and lost the...


OK, I would try to get the receipt information from the retailer and try to exchange for another.

If this proves futile, the camera will have to be serviced or replaced.

Kodak.com says that they are not responsible for cameras that have been dropped, but if you contact them, they may have a solution for you.
http://www.kodak.com/global/en/service/repair/troubleshooting/troubleshooting.jhtml?pq-path=6198

Try the above troubleshooting and repair link to get service that must be paid for since it was dropped or exposed to liquid for evaluation.

Aug 22, 2010 | Cameras

1 Answer

Lens Cap Error


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Apr 27, 2010 | Panasonic Lumix DMC-FZ28 Digital Camera

1 Answer

Screen says lens error and it will not close


Hi Dear,

This error is due to some fault in alignment of the lens. This is a hardware problem.
Hence, i will recommend you to take it to nearest service center and hand over it to some technical expert guys. Trying to resolve it on your own might worsen the issue.

Hope this will help you. If you need more information on this, please do write to us.

Have a nice day.

Nov 09, 2009 | Kodak Easyshare M753 Digital Camera

1 Answer

Lens error 122


Hey blondgal12,
From your description you should most likely have your camera looked at by an authorized service technician and get and estimate on a repair done. The manufacturer usually has a list of authorized service technicians in your local area, or you could try looking in the yellow pages. I hope this helps!

Sincerely,
Allan
Go Ahead. Use Us.

Jun 05, 2008 | Cameras

8 Answers

Lens error 122


ok,white screen is LCDproblum or flex conecting pro,error 122 is ur lens barrel stuckup or mechanical gears problum this is repareable u try ur local repairer

Mar 03, 2008 | Kodak EasyShare M853 Digital Camera

1 Answer

Digital camera photosmart r725


it wont open when power is turn on,i keep getting ,(camera has experienced an error)(please reset your camera)this number accompanies the message-00000018-4489-957-000,ive read the manuel nowhere does it say how to reset, help ?

Dec 13, 2007 | HP Photosmart R727 Digital Camera

2 Answers

Lens problem


You have damaged lens barrel mech. Within the lens barrel, there are couple of tiny plastic gears and any damage to one of those gear will cause this kind of problem. I'm not sure it would be worth repairing the problem because of the cost of repair around $100. Good luck.

Mar 13, 2007 | Fuji FinePix A330 Digital Camera

Not finding what you are looking for?
Kodak EasyShare M853 Digital Camera Logo

Related Topics:

559 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Tony

Level 3 Expert

2600 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...