Question about HP LaserJet 3030 All-In-One Printer

3 Answers

How do I scan a bunch of originals from the tray and get 1 file for each page?

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

Here is your manual
http://www.lavc.edu/IT/Manuals/Printer_HP_Laserjet_3020-3030_User_Guide.pdf

for information on scanning originals refer to page 62 of the manual or page 72 of the file, good luck and let me know if you need further help with this

Posted on May 13, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

I do not think its possible. You will have to manually put each document under the flatbed scanner to get a scan...

Posted on May 13, 2008

  • Swilin Sampson
    Swilin Sampson May 13, 2008

    The 3030 is not sheetfed type. Meaning, you cannot scan a bunch of originals from the tray directly...If you are looking for sheetfed scanners, try THIS page..

    Hope that helps..

  • Swilin Sampson
    Swilin Sampson May 13, 2008

    Ok, I may have been mistaken, THIS user guide should tell you how to do it..

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 13,433 Answers

How to scan images from the tray? I'm not sure if i know what you mean.

Posted on May 13, 2008

1 Suggested Answer

Danmart
  • 291 Answers

SOURCE: How do I scan a bunch of originals from the tray and get 1 file for each page?

Loading originals to scan
Use these instructions to load originals into your device for scanning. For the best quality
scans, use the flatbed scanner. See Selecting media for the automatic document feeder
(ADF) for guidelines on choosing original documents for scanning.
Loading originals onto the flatbed scanner
1. Make sure that the automatic document feeder (ADF) input tray is free of media.
2. Lift the flatbed scanner lid.
3. Place the original document face-down on the flatbed scanner with the top, left corner of
the document at the lower-right corner of the glass.
4. Gently close the lid.
5. The document is ready to be scanned.
CAUTION To prevent damaging the device, do not allow the scanner lid to fall onto the flatbed scanner
surface. Always close the scanner lid when the device is not in use.
Loading originals into the automatic document feeder (ADF)
input tray
Note The ADF capacity is up to 50 sheets of 75 g/m2 (20 lb) media (depending on the thickness of
the media), or fewer sheets if the stack fills the ADF.
The minimum size for media in the ADF is 127 by 127 mm (5 by 5 inches). For smaller sizes
use the flatbed scanner. The maximum size for media in the ADF is 215.9 by 381 mm (8.5 by
15 inches).
1. Make sure that the flatbed scanner contains no media.
2. Close the flatbed scanner cover and put the top end of the stack of originals into the ADF
input tray, with the media stack face-up and the first page to be scanned on top of the
stack.
3. Slide the stack into the ADF input tray until it does not move any farther.
If this helps you, let the Boss, FixYa.com Know...

Posted on May 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can I scan 3 pages together?


To create a single document from a number of scanned images, please click on this link and follow my instructions.
You can create a Word file or a PDF file.
http://www.fixya.com/support/r9689930-scan_multi_paged_document_create_single

Jul 23, 2011 | Kodak ESP 3 Multifunction Printer/ Copier/...

2 Answers

How do I scan more than one page at a time so I have a complete document of 6 pages instead of having 6 different document


you either select add a page, or use the document feeder. The document feeder will try to scan all pages into one file.

Mar 02, 2011 | Brother MFC 420CN All-In-One InkJet...

1 Answer

My Xerox CopyCentre C20 doesn't always print the entire page, as if it is only scanning part of the page. It happens when the original is placed on the glass surface as well as when the original is sent...


the paper size detector may not detect the original size of the document check the paper tray indicator light on the panel and make sure the direction is the same with the original document onthe glass

Aug 26, 2010 | Xerox CopyCentre C20 Black and White...

1 Answer

Original document fed into top feed tray of mfc 7440N model come out with few thin black lines on the mid left of the scanned file. Scanning file from glass has no issue.


You need to clean the narrow glass strip on the left side of the machine when you open the cover. There is likely lint or something on this glass. This is where the auto document feeder pages are "imaged".

May 20, 2010 | Brother MFC-7440N Laser Printer

3 Answers

I seem to have a problem scanning on the KM C351. When scanning a multiple page document I recieve 1 .pdf file per page. This happens whether or not Seperate Scan is selected. Right now the scan are sent...


the file type is set to single page
1.press the scan button on the control panel
2.select scan setting.
3.select file type.
4.select multi page to have the entire scan to be sent as a single file.
if you are sending jpegs they can only be sent as single page files on this machine. only pdf's and tiffs can be sent as multi page files

Nov 13, 2009 | Konica Minolta bizhub C351 All-In-One...

1 Answer

When faxing does paper face uup or down


You load the originals print side uo on the document feeder tray or print side down on the glass.
To send a single page fax you can either load the original on document feeder tray or on the glass; to send a multi-page fax you must use the document feeder tray.

The position of the paper is the same either you copy, fax or scan.
All this is clearly explained in the user's manual, that you should read and you can download from HP support pages for you printer:

Aug 09, 2009 | HP Officejet 6310 All-In-One InkJet...

1 Answer

I have the officejet 6310 but cant use the scan feature, how do I get it to work


this is how you use the scanning features of your printer.
To use the scan features, the HP all-in-one and computer must be connected and turned on. The HP all-in-one software must also be installed and running on the computer prior to scanning. To verify that the HP all-in-one software is running, look for the HP all-in-one icon in the system tray at the lower-right side of the screen, near the time.
NOTE: Closing the HP Windows system tray icon can cause the HP all-in-one to lose some of its scan functionality and result in the No Connection error message. If this happens, you can restore full functionality by restarting the computer or by starting the HP Image Zone software.
For information about how to scan from the computer, and how to adjust, resize, rotate, crop, and sharpen scans, see the onscreen HP Image Zone Help that came with the software.
Scan an original
Follow these steps if the HP all-in-one is directly connected to a computer through a USB cable.

1.
Load the original face down on the right front corner of the glass.
2.
In the Scan area, press Scan To . The Scan To menu appears, listing destinations, including applications, for anything that is scanned. The default destination is whichever one was selected the last time this menu was used.
3.
To select an application to receive the scan, use the arrow buttons to highlight it and then press OK or Start Scan . A preview image of the scan appears in the HP Scan window on the computer.
4.
Make any edits to the preview image in the HP Scan window. When finished, click Accept . The HP all-in-one sends the scan to the selected application.

Send a scan to an HP Instant Share destination
Follow these steps if the HP all-in-one is directly connected to a computer through a USB cable.

1.
Load the original face down on the right-front corner of the glass or, if using the document feeder tray, in the document tray.
2.
Press Scan To on the control panel of the HP all-in-one. The Scan To menu displays.
3.
Use the Up Arrow and Down Arrow buttons to highlight HP Instant Share .
4.
Press OK or Start Scan to select the destination and scan the image. The image is scanned and sent to the selected destination.
NOTE: If an original is detected in the automatic document feeder, one or more pages are scanned. If no original is detected in the automatic document feeder, a single page is scanned from the scanner bed.
NOTE: For Windows users, the HP Image Zone software opens on the computer, and the HP Instant Share tab displays. A thumbnail of the scanned image will display in the Selection Tray. For more information on the HP Image Zone, see the onscreen HP Image Zone Help that came with the software.

Stop scanning
To stop scanning, press Cancel on the control panel.

May 16, 2009 | HP OfficeJet 6210 All-In-One InkJet...

1 Answer

MCF 6490CW SCAN AS A PDF


I was trying to figure out how to scan multi-page documents to a single file and found this on the Brother website:

Double-click on the ControlCenter3 icon located in the Task Tray to launch the program window.

Click on CONFIGURATION -> SCAN.

Choose the type of scan you require. The choices are: IMAGE,
E-MAIL, and FILE.

The Scan to configuration window will appear.

The SOFTWARE BUTTON tab configures the Scan to button within theControlCenter3 software interface. The DEVICE BUTTON tab configures the Scan to key on the Brother machine. Choose the tab you want to configure.

Under FILE TYPE select an option that allows multi-page documents:

a) PDF (*.PDF)
b) Tiff Multi-Page # Uncompressed (*.tif)
c) Tiff Multi-Page # Compressed (*.tif)

Click OK.

Apr 28, 2009 | Brother MFC 6490CW InkJet Printer

1 Answer

How to convert this copier from inch to metric system??


SELECTING THE ORIGINAL SIZE
If you loaded a non-standard size* original or the original size was not correctly detected, set the original size manually.
Perform the following steps after placing the document in the document feeder tray or on the document glass.
1 Press the [SPECIAL FUNCTION] key.
The special function
screen will appear.
2 Select "ORIG. SIZE ENTER" from the
menu with the [ ] or [ ] key.
3 Press the [OK] key.
The original size selection
screen will appear.
4 Select the original size with the [ ] or
[ ] key.
The selected original size
is highlighted.
• To select an AB original size, press the [ ] key and
go to step 6.
• If you selected "SIZE INPUT", follow steps 4 through 6
of the procedure in "USING THE BYPASS TRAY TO
COPY A SPECIAL SIZE ORIGINAL" (page 51) to set
the horizontal and vertical dimensions of the original.
5 Press the [OK] key.
You will return to the base
screen and the selected original
size will appear in the original
size display.
Selecting an AB original size
6 Select the original size with the [ ] or
[ ] key.
To return to selection of inch original sizes, press the
[ ] key to return to step 4.
7 Press the [OK] key.
You will return to the base
screen and the selected original
size will appear in the original
size display.
* Standard sizes:
The following sizes can be detected correctly: 11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"
(A3, B4, A4, A4R, A5). If a non-standard size original is placed (including special sizes), the closest standard
size may be displayed, or the original size may not appear.
Note
DUPLEX
SPECIAL FUNCTION
ACC.
DUPLEX SCAN
DUPLEX SCAN
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
GH
PQR
DUPLEX
SPECIAL FUNCTION
DUPLEX SCAN
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
GHI
BACK OK
ORIG. SIZE ENTER
11x17
8 x14
81 x11
2
1
2
INCH
ORIG. SIZE ENTER
11x17
8 x14
8 x11
INCH
1
2
1
2
To cancel an original size selection, press
the [CA] key.
OK
ORIG. SIZE ENTER
A3
B4
A4
AB
OK
Note

Oct 02, 2008 | Sharp AR-207 Copier

1 Answer

How do I scan a bunch of originals from the tray and get 1 file for each page?


Loading originals to scan
Use these instructions to load originals into your device for scanning. For the best quality
scans, use the flatbed scanner. See Selecting media for the automatic document feeder
(ADF) for guidelines on choosing original documents for scanning.
Loading originals onto the flatbed scanner
1. Make sure that the automatic document feeder (ADF) input tray is free of media.
2. Lift the flatbed scanner lid.
3. Place the original document face-down on the flatbed scanner with the top, left corner of
the document at the lower-right corner of the glass.
4. Gently close the lid.
5. The document is ready to be scanned.
CAUTION To prevent damaging the device, do not allow the scanner lid to fall onto the flatbed scanner
surface. Always close the scanner lid when the device is not in use.
Loading originals into the automatic document feeder (ADF)
input tray
Note The ADF capacity is up to 50 sheets of 75 g/m2 (20 lb) media (depending on the thickness of
the media), or fewer sheets if the stack fills the ADF.
The minimum size for media in the ADF is 127 by 127 mm (5 by 5 inches). For smaller sizes
use the flatbed scanner. The maximum size for media in the ADF is 215.9 by 381 mm (8.5 by
15 inches).
1. Make sure that the flatbed scanner contains no media.
2. Close the flatbed scanner cover and put the top end of the stack of originals into the ADF
input tray, with the media stack face-up and the first page to be scanned on top of the
stack.
3. Slide the stack into the ADF input tray until it does not move any farther.
If this helps you, let the Boss, FixYa.com Know...

May 13, 2008 | HP LaserJet 3030 All-In-One Printer

Not finding what you are looking for?
HP LaserJet 3030 All-In-One Printer Logo

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...