Question about KitchenAid KUDS01DJ - Multiple Color Dishwasher

1 Answer

I have a Kitchen aid model KUDS01DJBL0 There seems to be a two fold problem: 1) cannot set reset cycel even tho the panel lock is off. When you close the door the light for normal goes on but you cannot select another cycle even after opening the door. 2) Once you start the diswasher it steams, heats but the water does not seem to be flowing. I've checked for obstructins with the float inside the machine, there are none. The water arms are all free. I'm perplexed. I'm not sure if it would be the water valve assembly or the control sensor panel. HOw do I differentiate?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You have to touch certain of the front panel touchbuttons in a certain pre-specified order. This sequence will cause the built in computer to initiate a "Diagnostic Mode", the repairman will step quickly through all the cycles at 1-2 minute intervals so that he doesn't waist his time. At the end of the diagnostic steps the computer will revert back to normal mode. You will need the "controls and cycles diagnostic sheet for repairman" map-sheet to be able to do the above, this sheet was with the machine when you first bought it.
I suspect the computer in your machine is stuck in the "Diagnostic mode" and is not getting out of it.
You can reach me at mariopapas@yahoo.com.

Posted on Oct 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model KUDR01TJ wont work no lights on


1) test the fuse blown +c.breaker reset.
2) Test the switch door, if close not will close the startign relay, and will not operate the motor.see the diagram.



5_8_2012_8_35_53_pm.gif5_8_2012_8_36_07_pm.gif

May 08, 2012 | KitchenAid Kitchen Aid Dishwasher Part...

2 Answers

Kitchen Aid KGRA806PSS


hmmm....that interlock is dependent on a temperature sensor, to ensure that no one opens that door when it's too hot inside. I'm assuming that it's still locked, even after the temperature has dropped off?

Feb 26, 2008 | KitchenAid KGRA806PSS Gas Kitchen Range

1 Answer

My Kitchen Aid dishwasher, model KUDK03FTSS3, is stuck in a loop of some sort. It starts, but freezes after a few minutes. Does anyone know the reset key sequence to make this go away? Kitchen Aid customer...


Hi. Pressing and holding the cancel button may reset the unit at this time,as well as, pulling the ac plug out of the wall outlet for five minutes. With that said, I will provide the proper reset sequence below. 1. Open the door of the unit slightly. 2. Within three seconds, press the following sequence in this order-high temp scrub,energy saver dry,high temp scrub,energy saver dry. 3. After the sequence, close the unit door and latch it. 4. After the door is closed, press the cancel button. This will reset the main control, unless there is major damage to the circuitry of the control board.

Oct 13, 2011 | KitchenAid 24 in. KUDI01FLSS Stainless...

1 Answer

I have a Kitchen Aid range model KGST307GBS0. The


The door light switch was broken (upper right face of oven). The door switch is automatically activated when the door is opened to turn on the oven light. When the door is closed the switch is depressed to turn off the light. It seems the switch position is detected by the oven and if it is in the open position it will not allow the oven to function properly (reach temperature or allow the cleaning cycle to run). I temporarily locked the broken switch in the closed position, which allows the oven to function. A new switch was ordered for replacement.

Jan 02, 2010 | KitchenAid KGST307 Gas Kitchen Range

2 Answers

Want to replace dishwasher panel with stainless steel


Yes indeed! If you know the measurements, you can buy a stainless panel from www.applianceart.com cut to any size you would like. THey also have a cheaper "faux" stainless option too. Many colors and designs as well.

Mar 03, 2009 | KitchenAid 24 in. KUDS25SH Built-in...

1 Answer

Control Lock light is on and nothing works on my stovetop


Hi. Research your stovetop on the kitchenaid website. You should be able to download a user manual for your model. The manual should tell you how to reset the lock. If a manual is not available, try disconnecting the power supply to the stove. This might clear the memory of the stove. Good luck. ricardok45

Feb 02, 2009 | KitchenAid KITCHEN AID 5 Quart Artisan...

1 Answer

Kitchen Aid dishwasher Child lock light on and dishwasher will not start.


if your unable to unlock the "childlock" by holding down the button, then it woud seem that theres a problem with the user interface itself

Oct 19, 2008 | KitchenAid 24 in. KUDS25 Built-in...

Not finding what you are looking for?
KitchenAid KUDS01DJ - Multiple Color Dishwasher Logo

720 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Dishwashers Experts

Mike

Level 3 Expert

4340 Answers

Cindy Wells

Level 3 Expert

5125 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you a KitchenAid Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...