Question about Televison & Video

1 Answer

My cable company is going digital & am programing new remote & tv set to a digital adapter. The three digit codes provided for magnavox do not work with my tv or new remote. There are there are 23 provided but don't work. The tv is a small table top model. Model # is CJ3922 CH03. Serial # is 73654880. Can't find date of purchase. Can you provide any assistance? Thank you

Posted by on

  • robert hirtzel Sep 07, 2010

    I have tried all remote tv codes i can find with your references, none work withmy tv. My tv is a small table top model & some yearsold. It maybe made before codes were assigned to this model. the remote will cnange channels but not turn off & on nor will it adjust the volume, may have to settle for that. They can be worked from tv set.

    Appreciate your help & Thank You.

    bhirtzel@hur.midco.net

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,340 Answers

Most flat panels have 4 digit codes.Here is a link for some Magnavox codes.If these fail to work,just reply to this post and I will see what else I can dig up.Most,if not all remotes have the same codes for each product.For example,an RCA one might have 0099 for yours,then almost all others would have the same code.Here is the link.
http://www.rockabilly.net/ofa/codes-tv.shtml
Here are some more 3 digit codes.If you do not see some of these compared to what you already have,try them.When I googled your model #,it appears that your TV is older?It may be borderline for 3 digit code use and 4 digit code use.
http://en.kioskea.net/faq/281-universal-remote-codes

http://www.universal-remote.net/philipsmagnavox.html

http://www.thompsontv.com/rcarc.html

Good luck! Greg

Posted on Sep 03, 2010

  • Greg McCarthy Sep 16, 2010

    I was gone for a week and don't remember what I sent but I think I sent some 4 digit ones.I also returned with the flu.Over the next day or 2 I will look for some more possible codes.Would you please tell me the make/model of the remote you are trying with?That may give a more exact result.
    Thanks,Greg Also,I assume the remote is a universal one and not the original it sounds like.The cable company is going digital.Is there a cable box?They would normally do something like attach the box and give you a remote for the box they provide.Even though your TV may be old,the TV's produced have had digital capability because they knew this day was coming years ago also.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My remote was working fine until i moved. I have Direct Tv and the remote from Direct Tv works on guide. I bought a new remote from Magnavox but it doesn't work my tv. what should I try? '


You have to program the remote control to synchronize with TV. If you wish to get moredetails; codes, three digits, four digits or five digit ones, check this link. Pull up older posts there. Setup code list and setup instructions to some popular model remote controls are given. Select the 'Timeslide' option from the drop-down list by the 'Sidebar' at the display window. It will make search easy.

Mar 17, 2013 | Televison & Video

1 Answer

No remote have universal remote what are codes for magnavox sdtv


Hello
You haven't specified details about your Magnavox. There is Philips Magnavox and Magnavox. Anyway I'll give you codes for both Philips magnavox and Magnavox.

MAGNAVOX CODES
Three digit universal remote codes are
004/ 008/ 009/ 062/ 068/ 069/ 074/ 075/ 076/ 077/ 089/ 133/ 163/ 165
Four digit universal remote codes are
0062 0004 0009 0456 0183 0226 0288 0008 0068 0075 0141

PHILIPS MAGNAVOX
Three digit codes are
183/ 184/ 208/ 213
Four digit codes are
0062 0204 0207 0183 0226 0288
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.


Mar 03, 2011 | Televison & Video

1 Answer

How do I find out the code for a Magnavox TV?


Hello

Three digit remote codes for Magnavox are:
004/ 008/ 009/ 062/ 068/ 069/ 074/ 075/ 076/ 077/ 089/ 133/ 163/ 165

Four digit remote codes for Magnavox are:
0062 0004 0009 0456 0183 0226 0288 0008 0068 0075 0141

Four digit remote codes for Philips Magnavox are:
0062 0204 0207 0183 0226 0288

Three digit remote codes for Philips Magnavox are:
183/ 184/ 208/ 213

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
OK.

Feb 02, 2011 | Olevia Televison & Video

2 Answers

I NEED TO PROGRAM A MAGNAVOX TV WITH A PHILLIPS UNIVERSAL REMOTE CONTROLL


Find codes and methods here.
http://www.docstoc.com/docs/23925020/Programming-Remote-Control-Brand-Codes-TV-Sets

If those codes dont work try the last three(or four) numbers of your TV's serial number.

On my universal remote is just a matter of holding down the TV button till the light stays on, then punching in the three digit TV code. When the TV turns off it's the right code. But read your manual for your controller.

Oct 08, 2010 | Universal Remote Control Universal IR...

1 Answer

Looking for the tv code from a rca remote to a magnavox tv and how to set it


Hi! Try these steps I hope it helps..

  1. Find codes for each device and brand below.
  2. Press and "HOLD" CODE SEARCH.
  3. Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
  4. Enter the three digit code from the TV, VCR or Cable Box code lists.

  5. Release CODE SEARCH.
  6. With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists.
The codes for your tv are:

006,007,010,011,013,016
027,033,035,043,066,087,089

Jun 10, 2010 | RCA Televison & Video

1 Answer

TROUBLE PROGRAMMING COMCAST ADAPTER TO TV.


Please call me I can help you deal with this.
I am extreme familiar with Comcast issues.

for just tv/remote codes
Try
http://www.remotes.com/

Thanks
Frank
Live-Tech
1-888-361-8511
http://www.mylive-tech.com.


Apr 30, 2010 | Broksonic TV

1 Answer

I need to know how to program my tv using the rcr311w by rca i have a magnavox tv


Hello gailyoumans,

Here are the codes for your Magnavox Tv,

006,007,010,011,013,016

Press and "HOLD" CODE SEARCH.

Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.

Enter the three digit code

With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps with a different code.

Hope this helps you out, If so then please leave a thumbs up.

Cheers Little Dish Fitter.

Oct 17, 2009 | RCA Universal Remote Control

18 Answers

Universal remote code for digital converter


The code for a Magnavox Converter *Analog to Digital* to a Philips Universal Remote is 0759

Mar 21, 2008 | Televison & Video

1 Answer

Direct TV remote control won't work with my new TV


These are 4-digit codes : 0054, 0030, 1454, 0020. Here are 3-digit codes : 006, 007, 010, 011, 013, 016, 027, 033, 035, 043, 066, 087, 089. Try these.

Dec 06, 2007 | Philips Magnavox 27MS343S 27" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74473 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...