Question about Audio Players & Recorders

Open Question

Nexxtech Model N2000-CDR 1. We put it in record mode. It starts to record and then stops. The screen indicates it is recording, but it isn't. Then the timer counter stops. 2. Sometimes when it does record, it comes to the end of the recording time. the operator hits the stop button twice, per instructions. The screen says "stop record in progress." But it doesn't stop. The operator after a few minutes finally unplugged the unit to get the cd out. The operator has been using this machine since we purchased it 5 yrs ago.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
djeddieb
  • 1 Answer

SOURCE: Recording Errors

easy fella

sounds funny but ive got the exact same problem with the same machine but by the sounds of it philips aint that good for recording from a cd form from that model anyway!!
theres an old skool mix that i wana put out, but it will only play back on the recorder not on another source, ive managed to open the file up with nero show time on the pc thou and it will also play but just cant manage to convert to mp3 as the file is a wpl or something...

well annoying if you ask me

hpe thats helped a bit

Posted on Feb 04, 2008

Ad
ginko
  • 19396 Answers

SOURCE: KLH CDR 2000 2-Disc CD Recorder

Manual is not available for free download.

If you have the product code enter it here:Download Manuals

Or contact Koss: Contact

Posted on Dec 03, 2008

petraman7
  • 1175 Answers

SOURCE: Cdr 880 wont finalize?

The manual is here. Cut and paste the whole link

http://www.m4c.magnavox.com/cgi-bin/dcbint/cpindex.pl?scy=US&slg=AEN&cat=ZZCA_PHILIPS_GEN_GR&sct=ZZSU_PHILIPS_GEN_GR&grp=PHILIPS_GEN_GR&session=20090105073605_209.134.37.191&ctn=CDR880BK&mid=Link_UserManuals&hlt=Link_UserManuals

It's on the magnavox site

Posted on Jan 05, 2009

dunnbiker
  • 8546 Answers

SOURCE: I have a Phillips CDR 775 2 -disc cd recorder and

It's all in the manual...

20 seconds is the amount of digital 'silence' the machine will let pass during recording before it marks a new track. t will Pause and wait one minute for a digital signal to resume. (Page 21)

On digital copying it will automatically increment track numbers as the source advances.

For analog sources you should switch Auto Track to OFF and manually press Track as applicable. (Page 28)

Posted on Jan 21, 2011

dunnbiker
  • 8546 Answers

SOURCE: nexxtech n2000 The manual says CD-R with "Digital"

I'm pretty sure it actually says something to the effect of "These discs are marked with "Digital Audio" and the logos shown below...', the operative word being AUDIO.

DATA discs do not work on a consumer CDRecorder.

Posted on Jul 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Nexxtech n2000 The manual says CD-R with "Digital"


I'm pretty sure it actually says something to the effect of "These discs are marked with "Digital Audio" and the logos shown below...', the operative word being AUDIO.

DATA discs do not work on a consumer CDRecorder.

Jul 09, 2011 | NexxTech N2000

1 Answer

Hi. My Philips CD Recorder CDR 785 stops and turn off when i try to recorder from spotify.


The Unit turns itself off automatically after a few (variable) time when simply reading a CD and also when burning, then after 1 or 2 seconds it turns on and goes automatically in stand by mode. Any solution? Thanks.

Mar 08, 2011 | Philips CDR785 3-Disc CD Recorder

1 Answer

Camera appears to be recording but on rewind no display


Start by trying a different casette and make sure the switch is in play back position. The switches are so tiny it can be ard o tell which mode is active.

Jul 11, 2010 | JVC GR-D290 Mini DV Digital Camcorder

2 Answers

Recording Error, Can not record on this disc, E 4 54040990 Just trying to record from TV on a Memorex DVD+RW. Keep getting this error. Any ideas?


Recently started getting the same error message. I thought it was because I was getting to close to full or something that was trying to over fill the discs. Have tried EP and LP and this just started when I had a disc set to record to the end. I can't even open that one or finalize it. The rest do the same. They are working fine and when the error comes up, ZAP the disc is dead, no access.

I also tried putting the same disc into another Magnavox DVD recorder, still no access. These are both the most reliable recorders I've ever owned and I've had a number.

magnavox error message dvd "e 6 2a031000 can not record on this disc."

I suspect at this point, a batch of cheap Nexxtech DVDs. Also it's possible that it's a heat problem with the recorder? Once the disc goes into error mode, it's unreadable and all recordings that haven't been written to the TOC become invisible, but that time is forever lost on the DVD.

DVD is visibly (looking at recording surface) FULL but the supposed record time isn't used up. Data error. Discs reporting wrong size. Try a different brand of DVD.

Mar 28, 2010 | Philips Magnavox MWR20V6 DVD Recorder/VCR

1 Answer

I need a manual for a nexxtech n2000 cdr.Where can I find one? stevebrownlee714@hotmail.com


I tried to locate the manual with google, but unfortunately had no success. You could ask some specialized manual search engines, like here or here. The services are not for free, but most times worthy - saved my live more than once.

Mar 05, 2010 | NexxTech Computers & Internet

1 Answer

Problem with analog recording on Yamaha CDR D651


Your assessment that it duplicates CD's internally fits with an analog-only failure mode. Let's make sure the signal is getting past your RCA jacks on the deck...

Put the deck in a Rec/Standby mode and make sure an analog source registers adequate volume on the meters. If it's good there and doesn't change with cable swapping between the input channels, you're right, the problem is internal. Maybe the volume potentiometer itself has developed a dead spot. Manually rotate it throughout its range many times to wipe it clean.

If you have an external optical digital source use it to check the meters in digital recording mode to be sure they're about even. The same knob affects analog and digital levels.

If you have the deck connected via the traditional Tape Monitor circuit in a receiver you should be able to tell by ear if the one channel is dead or too low. This puts all of the recording circuitry including the volume knob in line with your receiver.

May 16, 2009 | Yamaha CDR-D651 2-Disc CD Recorder

1 Answer

My philips cd recorder is not recording


the recorder philips cdr-778 put my 80 min sony cd-r audio in it start recording 20 second on track 1 go to track 2 for 20 second then stops goes to update some times it reads no disc when installing the disc we have been recording at the Church for the past 2 years

from clyde

Mar 02, 2009 | Philips CDR778 2-Disc CD Recorder

1 Answer

Need user manual


I have the CDR-200 and did not have the manual either. However, I did discover the same problem and found the solution. There is a "confirm" button on the front of the unit under the display area. After you press the record button "Record" will begin to flash in the display area and then you press "Confirm". It should start recording. Note however the following:

BURNING FROM EXTERNAL CASSETTE OR PHONO
Before starting this procedure make sure you have an AUDIO recording CD in the RECORDER tray of the CDR-200. A regular CD-R type of disc for computers is not going to work and may cause an annoying message on the display which does not go away until you put the right type of recording CD in the unit. It must be either an AUDIO CD-R or an AUDIO CD/RW.

1. When copying from an external cassette deck, you should set the source (press source button) until the setting is "Analog".

2. The "Dual" button should not be in effect. In the lower right portion of the screen you should only see a small number "1" with a circle around it. This indicates the CDs currently being used by the burner. In "dual" mode you can copy from the Playback CD of the CDR-200 to the Recorder CD. In dual mode you see "1" and "2" with circles around them. The active CD tray will flash on the display.

3. When copying from an external cassette unit, you use the "Record" button to start the recording. At the end of the cassette track you MUST press the STOP button by the CD Recorder tray. After you press STOP the unit will say "Update" which indicates it is closing out the track on the CD-R. You can continue to write tracks by pressing RECORD again, then CONFIRM when the tape is positioned at the right PLAYBACK track. It is usually helpful to have a few seconds of blank tape at the start of the PLAYBACK track before pressing RECORD. Press play on the cassette deck, then RECORD followed by CONFIRM on the CD burner.

4. When the track has finished burning you must press STOP to close the track on the CD-R. After you press STOP, the unit will display "Update" to indicate it is updating or closing the track. When the process completes, the unit will display the tracks it has written to the CD-R and will be ready for you to copy another track or FINALIZE the CD-R. When the unit is waiting after the STOP, you can change the cassette tape, reposition to a playback track and ready the playback tape for more recording. When the PLAYBACK tape is ready repeat STEP 3. Repeat steps 3 and 4 until you have about 14 or 15 tracks on the CD-R.

5. When you have finished recording about 14 or 15 tracks onto the CD-R, you will want to finalize the CD-R. Press the FINALIZE button, and then press the CONFIRM button. You will see the the unit start to display the progress of the finalize by advancing the level meters of the left and right channels in the display. When the unit is finished finalizing it will return to the number of tracks display for the CD-R. After finalizing the CD-R you can play it back to make sure the burn was successful. Be sure to wait for the tracks display before removing or playing the CD-R after the finalize is done. Removing before the finalize is done may damage the unit and may render the CD-R bad.

BURNING FROM THE PLAYBACK CD
Before starting this procedure make sure you have an AUDIO recording CD in the RECORDER tray of the CDR-200. A regular CD-R type of disc for computers is not going to work and may cause an annoying message on the display which does not go away until you put the right type of recording CD in the unit. It must be either an AUDIO CD-R or an AUDIO CD/RW.

1. Set the unit to "Dual" mode. As described above, you will see "1" and "2" with small circles in the lower right portion of the display.

2. Make sure the "Source" mode is set to "Analog" by repeatedly pressing the SOURCE button until it shows "Analog".
3. When copying from the PLAYBACK CD tray you will not use the RECORD button by the CD Burner tray. You will use the 'DUB" button just to the right of the display.

4. Put an audio CD in the PLAYBACK CD tray and press the skip track button ">>" until you arrive at the track you wish to record from. If the track you want to start at is track 1, then you don't need to skip tracks.

5. When positioned at the correct playback track, press the DUB button. The unit will show "CDR" and then "DUB" on the display. When it says "DUB" press the CONFIRM button. The unit will start recording. You can adjust the record level during the first few seconds to make sure you don't have the recording volume level set too high.

6. When the track is finished, you should see the unit indicate on the display "Update". This indicates it is closing the track and it should do this automatically. If it does not do this you may have to press STOP near the RECORDER Tray to force closing of the track. Usually the unit indicates "AUTO" in the display area and I believe that is what controls the automatic track numbering feature. I am not sure how the AUTO feature is turned on. I noticed on the CDR-200 it is on by default.

7. After the UPDATE is complete, the unit will display the number of tracks it has written to the CD-R. You can at this point change the PLAYBACK CD to another one or advance to another track for continued recording. When at the correct track simply go back to step 5 and continue.

8. When you are all done copying tracks from one or more CDs, and you wish to finalize the CD press FINALIZE and then press CONFIRM to start the finalize process. I noticed on the CDR-200 if you wait too long after recording a track the unit may start the finalize process automatically. This happened after at least 5 minutes. It is best to try and stay with the copy process to monitor what is happening. The finalize can also start if you have written to many tracks to the CD-R and it runs out of space. Typically, your safe if you burn about 14 to 15 tracks to a CD-R at a time. You might be able to fit more if the tracks are very short (2-3 minutes each).

One last note about the connections on the back of the unit. Read the labels of the connections on the back very carefully. The CDR-200 and probably the 201 have separate outputs for the PLAYBACK CD (CD) and BURNER CD (CDR). You will want to connect these to seperate inputs on your audio amplifier. Or you might also wish to merge them using adapters into one input on your audio amplifier. If you keep them separate you will need to change sources on the audio amplifier to hear each tray. For example, you might need to switch to "CD/TAPE" for the CD, and "AUX" for the CDR. It is probably easier to merge the two using audio adapters which can be readily obtained from RadioShack.

I hope this helps!

May 08, 2008 | Classic Electronics CDR201 CD Recorder

1 Answer

RCA CD recorder/player CDRW120


You sure it's recognizing the CDR? And you are using 'consumer audio' cdr? Watch it at all times. If it 'opc fails' after you put a blank in it still shows as a CDR and 0:00 on the display but won't record. It's easy to miss.

Nov 02, 2007 | RCA CDRW120 2-Disc CD Recorder

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

The Knight
The Knight

Level 3 Expert

74468 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...