Question about Logitech QuickCam Chat Personal Web Camera

1 Answer

Image quality how to improve the image quality

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 268 Answers

Hi,

Many factors can affect the image quality of your pictures. If you are experiencing blurry images, please try adjusting the focus ring located around the lens.

This will allow you to focus the camera image on objects at different distances.

Also, make sure there is good lighting. Improving the lighting conditions can improve the image quality considerably.

Connection Issues:

If the image quality is poor while transmitting video over the Internet using video enabled programs such as MSN Messenger, Yahoo! or AOL Instant Messenger, your connection speed to the Internet directly affects the image quality of the transmitted video.

Corporate LAN, DSL/cable modem connections will result in the best image quality experience, while dial-up connections may result in choppy and overall poor quality because of the slower connection speed.

Even broadband connections such as DSL/cable modem may experience choppy video at times because of Internet traffic or slow upload speeds.

If the image appears clearly in the camera software, most likely your Internet connection may be responsible for the poor image quality in your video program.

Changing Display Adapter Settings:

If you are still experiencing a distorted, fuzzy or grainy image, you may need to change the settings for your display adapter.

For optimal image quality, please make sure the video display adapter is set to display at least 16-bit high color or higher.

To change the color palette please perform the following steps:

Click on "Start," "Settings," and "Control Panel."

Double-click on the Display icon.

Click on the tab labeled Settings.

In the dialog box labeled Color Palette, verify the video mode is set to 16-bit (high color) or 24-bit (true color).

Also, check with the manufacturer of the video card for updated video drivers.

Low Light Boost:

If you cannot do anything to improve the lighting situation, some Logitech video cameras have an option for "Low Light Boost."

If there is an option for "Low Light Boost," try enabling the "Low Light Boost" in the QuickCam software.

To do this:

Open the QuickCam software.

At the bottom right hand corner of the camera image box, click on the arrow next to the QuickCam icon.

Choose "Advanced Camera Settings".

Under the Image Enhancement box, place a check mark in the "Low Light Boost" option.

If that does not improve the image quality, try adjusting the other image settings, such as contrast, saturation brightness, gain and white balance.

Click OK when your are done.

Last, make sure that you ae using the latest drivers.

You can upodate them from here.

http://www.logitech.com/index.cfm/492/&cl=us,en?prodcrid=492

Hope this helps.

Good Luck.

Live, Love, Laugh.

Posted on May 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Webcam has a fuzzy image


See if it has a round ring on the front of the webcam lens. If so turn it manually to see if the focus improves. Also try this blog post on How to Improve Webcam Image Quality as it provides a lot of tips and techniques to getting the best image possible out of your webcam.

Jan 12, 2011 | Micro Innovations IC014C Webcam

1 Answer

It is giving blurr view? What should be done to improve the picture quality?


Your webcam is one of the less expensive ones, and the best image resolution you can achieve is 0.3Mp, or 640x480. Better webcams can provide images at 1.3Mp or 2Mp. To get the best image possible from the webcam you have try the tips in this article How To Improve Your Webcam Image Quality. Beyond that you'd have to just buy a better webcam. Sorry.

Aug 12, 2010 | Microsoft LifeCam VX-1000 Webcam

1 Answer

The view is very bad. What can be the reason?


Check if it has a focus ring on the front. You can go to this free webcam test site and adjust the ring until you are happy with the image quality. Also the article How To Improve Your Webcam Video Quality provides many helpful tips and recommendations on getting the best image quality possible out of your webcam.

May 26, 2010 | Sony PCGA-UVC10 Webcam

1 Answer

Image


Start > All Programs > Locate your Microsoft lifecam folder, there should be some program to load. Then there are options on how to change the quality in options tab.

May 31, 2009 | Microsoft LifeCam VX-3000 Web Camera

1 Answer

QuickCam Express, blurry, snowy picture...sometimes the picture is totally shaded red


Hi,

Many factors can affect the image quality of your pictures. If you are experiencing blurry images, please try adjusting the focus ring located around the lens.

This will allow you to focus the camera image on objects at different distances.

Also, make sure there is good lighting. Improving the lighting conditions can improve the image quality considerably.

Connection Issues:

If the image quality is poor while transmitting video over the Internet using video enabled programs such as MSN Messenger, Yahoo! or AOL Instant Messenger, your connection speed to the Internet directly affects the image quality of the transmitted video.

Corporate LAN, DSL/cable modem connections will result in the best image quality experience, while dial-up connections may result in choppy and overall poor quality because of the slower connection speed.

Even broadband connections such as DSL/cable modem may experience choppy video at times because of Internet traffic or slow upload speeds.

If the image appears clearly in the camera software, most likely your Internet connection may be responsible for the poor image quality in your video program.

Changing Display Adapter Settings:

If you are still experiencing a distorted, fuzzy or grainy image, you may need to change the settings for your display adapter.

For optimal image quality, please make sure the video display adapter is set to display at least 16-bit high color or higher.

To change the color palette please perform the following steps:

Click on "Start," "Settings," and "Control Panel."

Double-click on the Display icon.

Click on the tab labeled Settings.

In the dialog box labeled Color Palette, verify the video mode is set to 16-bit (high color) or 24-bit (true color).

Also, check with the manufacturer of the video card for updated video drivers.

Low Light Boost:

If you cannot do anything to improve the lighting situation, some Logitech video cameras have an option for "Low Light Boost."

If there is an option for "Low Light Boost," try enabling the "Low Light Boost" in the QuickCam software.

To do this:

Open the QuickCam software.

At the bottom right hand corner of the camera image box, click on the arrow next to the QuickCam icon.

Choose "Advanced Camera Settings".

Under the Image Enhancement box, place a check mark in the "Low Light Boost" option.

If that does not improve the image quality, try adjusting the other image settings, such as contrast, saturation brightness, gain and white balance.

Click OK when your are done.

Last, make sure that you ae using the latest drivers.

You can upodate them from here.

http://www.logitech.com/index.cfm/492/&cl=us,en?prodcrid=492

Hope this helps.

Good Luck.

Live, Love, Laugh.

May 12, 2008 | Logitech Webcam

1 Answer

Logiteck quickcam communicate


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>- --> Troubleshooting: Image Quality for Cameras trnsp.gif Detailed Description This article covers some standard troubleshooting for issues such as fuzzy, grainy, out-of-focus or off-color camera images. trnsp.gif Answer The information in this article applies to the following software
QuickCam 9.x and below
ImageStudio 7.x and below
Many factors can affect the image quality of your pictures. If you are experiencing blurry images, please try adjusting the focus ring located around the lens. This will allow you to focus the camera image on objects at different distances. Also, make sure there is good lighting. Improving the lighting conditions can improve the image quality considerably.
Connection Issues:
If the image quality is poor while transmitting video over the Internet using video enabled programs such as MSN Messenger, Yahoo! or AOL Instant Messenger, your connection speed to the Internet directly affects the image quality of the transmitted video. Corporate LAN, DSL/cable modem connections will result in the best image quality experience, while dial-up connections may result in choppy and overall poor quality because of the slower connection speed. Even broadband connections such as DSL/cable modem may experience choppy video at times because of Internet traffic or slow upload speeds. If the image appears clearly in the camera software, most likely your Internet connection may be responsible for the poor image quality in your video program.
Changing Display Adapter Settings:
If you are still experiencing a distorted, fuzzy or grainy image, you may need to change the settings for your display adapter. For optimal image quality, please make sure the video display adapter is set to display at least 16-bit high color or higher. To change the color palette please perform the following steps:
  1. Click on "Start," "Settings," and "Control Panel."
  2. Double-click on the Display icon.
  3. Click on the tab labeled Settings.
  4. In the dialog box labeled Color Palette, verify the video mode is set to 16-bit (high color) or 24-bit (true color).
  5. Also, check with the manufacturer of the video card for updated video drivers.
Low Light Boost:
If you cannot do anything to improve the lighting situation, some Logitech video cameras have an option for "Low Light Boost." If there is an option for "Low Light Boost," try enabling the "Low Light Boost" in the QuickCam software. To do this:
  1. Open the QuickCam software.
  2. At the bottom right hand corner of the camera image box, click on the arrow next to the QuickCam icon.
  3. Choose "Advanced Camera Settings".
  4. Under the Image Enhancement box, place a check mark in the "Low Light Boost" option.
  5. If that does not improve the image quality, try adjusting the other image settings, such as contrast, saturation brightness, gain and white balance.
  6. Click OK when your are done.

Mar 05, 2008 | Logitech QuickCam Communicate STX Personal...

1 Answer

Logitech web cam


Many factors can affect the image quality of your pictures. If you are experiencing blurry images, please try adjusting the focus ring located around the lens. This will allow you to focus the camera image on objects at different distances. Also, make sure there is good lighting. Improving the lighting conditions can improve the image quality considerably.
Connection Issues:
If the image quality is poor while transmitting video over the Internet using video enabled programs such as MSN Messenger, Yahoo! or AOL Instant Messenger, your connection speed to the Internet directly affects the image quality of the transmitted video. Corporate LAN, DSL/cable modem connections will result in the best image quality experience, while dial-up connections may result in choppy and overall poor quality because of the slower connection speed. Even broadband connections such as DSL/cable modem may experience choppy video at times because of Internet traffic or slow upload speeds. If the image appears clearly in the camera software, most likely your Internet connection may be responsible for the poor image quality in your video program.
Changing Display Adapter Settings:
If you are still experiencing a distorted, fuzzy or grainy image, you may need to change the settings for your display adapter. For optimal image quality, please make sure the video display adapter is set to display at least 16-bit high color or higher. To change the color palette please perform the following steps:
  1. Click on "Start," "Settings," and "Control Panel."
  2. Double-click on the Display icon.
  3. Click on the tab labeled Settings.
  4. In the dialog box labeled Color Palette, verify the video mode is set to 16-bit (high color) or 24-bit (true color).
  5. Also, check with the manufacturer of the video card for updated video drivers.
Low Light Boost:
If you cannot do anything to improve the lighting situation, some Logitech video cameras have an option for "Low Light Boost." If there is an option for "Low Light Boost," try enabling the "Low Light Boost" in the QuickCam software. To do this:
  1. Open the QuickCam software.
  2. At the bottom right hand corner of the camera image box, click on the arrow next to the QuickCam icon.
  3. Choose "Advanced Camera Settings".
  4. Under the Image Enhancement box, place a check mark in the "Low Light Boost" option.
  5. If that does not improve the image quality, try adjusting the other image settings, such as contrast, saturation brightness, gain and white balance.
  6. Click OK when your are done.

Feb 27, 2008 | Logitech Quickcam Chat Webcam

1 Answer

Pic quality


Many factors can affect the image quality of your pictures. If you are experiencing blurry images, please try adjusting the focus ring located around the lens. This will allow you to focus the camera image on objects at different distances. Also, make sure there is good lighting. Improving the lighting conditions can improve the image quality considerably.
Connection Issues:
If the image quality is poor while transmitting video over the Internet using video enabled programs such as MSN Messenger, Yahoo! or AOL Instant Messenger, your connection speed to the Internet directly affects the image quality of the transmitted video. Corporate LAN, DSL/cable modem connections will result in the best image quality experience, while dial-up connections may result in choppy and overall poor quality because of the slower connection speed. Even broadband connections such as DSL/cable modem may experience choppy video at times because of Internet traffic or slow upload speeds. If the image appears clearly in the camera software, most likely your Internet connection may be responsible for the poor image quality in your video program.
Changing Display Adapter Settings:
If you are still experiencing a distorted, fuzzy or grainy image, you may need to change the settings for your display adapter. For optimal image quality, please make sure the video display adapter is set to display at least 16-bit high color or higher. To change the color palette please perform the following steps:
  1. Click on "Start," "Settings," and "Control Panel."
  2. Double-click on the Display icon.
  3. Click on the tab labeled Settings.
  4. In the dialog box labeled Color Palette, verify the video mode is set to 16-bit (high color) or 24-bit (true color).
  5. Also, check with the manufacturer of the video card for updated video drivers.
Low Light Boost:
If you cannot do anything to improve the lighting situation, some Logitech video cameras have an option for "Low Light Boost." If there is an option for "Low Light Boost," try enabling the "Low Light Boost" in the QuickCam software. To do this:
  1. Open the QuickCam software.
  2. At the bottom right hand corner of the camera image box, click on the arrow next to the QuickCam icon.
  3. Choose "Advanced Camera Settings".
  4. Under the Image Enhancement box, place a check mark in the "Low Light Boost" option.
  5. If that does not improve the image quality, try adjusting the other image settings, such as contrast, saturation brightness, gain and white balance.
  6. Click OK when your are done.
Using Latest Software:
Finally, make sure you are using the latest release of Logitech camera software. You can download the latest release from the Logitech Downloads + Parts page.

Feb 26, 2008 | Logitech Webcam

3 Answers

Blury Pictures


My Logitech Quickcam for notebooks Deluxe webcam was blurry.

I spent 3 hours surfing the net looking for the answer, only to find a load of vague and technical responses about OS's and other ****. I fiddled about with the focus ring around the lens on my cam, which wouldn't move, so i figured i had an inferior version that had some sort of in-built auto-focus.

Eventually i lost my rag with the poor quality of information i was finding on this issue.

I went downstairs, got my pliers out of my tool bag, and wrenched the lens ring.

It moved.

Camera focused.

Job done.

Voila, no techy **** required.

Feb 16, 2008 | Logitech Webcam

1 Answer

Shows Dark


Many factors can affect the image quality of your pictures. If you are experiencing blurry images, please try adjusting the focus ring located around the lens. This will allow you to focus the camera image on objects at different distances. Also, make sure there is good lighting. Improving the lighting conditions can improve the image quality considerably.
Connection Issues:
If the image quality is poor while transmitting video over the Internet using video enabled programs such as MSN Messenger, Yahoo! or AOL Instant Messenger, your connection speed to the Internet directly affects the image quality of the transmitted video. Corporate LAN, DSL/cable modem connections will result in the best image quality experience, while dial-up connections may result in choppy and overall poor quality because of the slower connection speed. Even broadband connections such as DSL/cable modem may experience choppy video at times because of Internet traffic or slow upload speeds. If the image appears clearly in the camera software, most likely your Internet connection may be responsible for the poor image quality in your video program.
Changing Display Adapter Settings:
If you are still experiencing a distorted, fuzzy or grainy image, you may need to change the settings for your display adapter. For optimal image quality, please make sure the video display adapter is set to display at least 16-bit high color or higher. To change the color palette please perform the following steps:
  1. Click on "Start," "Settings," and "Control Panel."
  2. Double-click on the Display icon.
  3. Click on the tab labeled Settings.
  4. In the dialog box labeled Color Palette, verify the video mode is set to 16-bit (high color) or 24-bit (true color).
  5. Also, check with the manufacturer of the video card for updated video drivers.
Low Light Boost:
If you cannot do anything to improve the lighting situation, some Logitech video cameras have an option for "Low Light Boost." If there is an option for "Low Light Boost," try enabling the "Low Light Boost" in the QuickCam software. To do this:
  1. Open the QuickCam software.
  2. At the bottom right hand corner of the camera image box, click on the arrow next to the QuickCam icon.
  3. Choose "Advanced Camera Settings".
  4. Under the Image Enhancement box, place a check mark in the "Low Light Boost" option.
  5. If that does not improve the image quality, try adjusting the other image settings, such as contrast, saturation brightness, gain and white balance.
  6. Click OK when your are done.

Jan 13, 2008 | Logitech Quickcam Chat Webcam

Not finding what you are looking for?
Logitech QuickCam Chat Personal Web Camera Logo

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Webcams Experts

gaucherre

Level 2 Expert

180 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

378 Answers

Pieter Vleeshouwers

Level 3 Expert

1423 Answers

Are you a Logitech Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...