Question about Dacor DMT2420 1200 Watts Microwave Oven

1 Answer

Ewave microwave This morning I discovered there is no response to any of the keypad entries. I was greeted with the running message to touch the clock pad to enter the time in several languages, but there was no response. There was no response to any other key pad either, fan, light, timer, coffee heater. What happened? And is there anything I can do other than throw the microwave out?

Posted by on

  • 5 more comments 
  • gatordfq Jun 28, 2008

    I've seen th no responding keypad several times after a power glitch, if you don't enter the time withen a few minutes of the power glitch the touch pad will not respond. I recycled power to the microwave and it works for now. The problem I'm actually trying to resolve is the keypad is intermittent. If you keep pressing in the touchpad, it starts working. I'm looking for a fix to that problem. 6-28-08

  • Anonymous Oct 17, 2008

    flakey touch pad- very agravating

  • mrsrlsgjs Dec 04, 2008

    keypad

  • Yanze Dec 19, 2008

    I have e wave over the range microwave I was using it and all of a sudden it tripped a breaker. I reset the breaker but only thing that works is the light in the oven what could be the problem.

  • Jobless in O Jan 09, 2009

    We have the same problem...only one button works on the keypad...ours is less than 5 yrs old with less than average use

  • rlsmithnm Jan 13, 2009

    I purchased a replacement keypad for my DTM2420 fromhttp://www.microwavedisplay.com

  • Anonymous Mar 16, 2009

    Ewave microwave no functioning at all.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 117 Answers

Replace keypad

Posted on May 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

F3 code


An F3 error code indicates that the keypad for the control panel is bad or has a short. This will cause the microwave to beep continuously after the set clock message appears.
On many models of microwave oven means a problem with the touch panel, (tact switches).

Replace the switch panel to fix the fault.


Hope this helps.

Aug 10, 2011 | General Electric Microwave Oven

1 Answer

My ewave microwave oven fan keeps running will not shut off unless power is unplugged


Sorry to read about your problem, I hope this helps you out.

you have a defective fan relay switch

I tried to help you. Please help me and Rate/Vote on my response, thanks and good luck

Dec 23, 2010 | Microwave Ovens

1 Answer

F2 E0 "Stuck key" ????????????


F2-E0 - Shorted Touch Pad (Keypad) - Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure.
Select the 'cancel' function and wait 60 seconds.
If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!^!^

Jan 03, 2010 | KitchenAid KCMS1555RSS Stainless Steel...

2 Answers

Set clock


Does it have a clock button. If so simply push clock, input the time then clock again.

Nov 28, 2009 | Microwave Ovens

1 Answer

Ewave panel is on lock


As per the owner's manual:

The oven operation can be locked to prevent the microwave from accidentally being turned on. All oven functions can be locked.

To Set: Touch and hold the CANCEL/OFF Pad for three seconds. The Display shows “LOCKED” and the oven beeps.

To Cancel: Touch and hold the CANCEL/OFF Pad for three seconds. “LOCKED” disappears from the Display and the oven beeps.

If this does not work, then try a hard reset: Unplug the unit for a minute or so. Then plug it back in, set the clock and try again.

If it still fails, you probably have a problem with the controller.

We regularly repair such control units for customers nationwide by mail for $39.95 postpaid in about a week or so with a one-year guarantee. It may cost a little more if you need parts, such as a new keypad.

Feel free to contact me directly (and please remind me of your full model number from the tag on the unit) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
prototech@usa.net
http://www.microwavedisplay.com
Microwave Oven Control Panel Repair Nationwide

Aug 26, 2009 | Frigidaire Microwave Microwave Oven

1 Answer

My microwave magic chef mco160uw just keeps turning on by itself. The microwave is only about 5 months old


The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again.

If it still fails, you have a failed keypad.

This can be dangerous, and you should keep it attended to when in use (as with any microwave) and unplugged when not in use.

Since it's less than one year old, it should be fully covered under warranty. I'd suggest contacting the manufacturer to get it fixed free.

For more help from Magic Chef / Ewave see here or their contact page.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Aug 06, 2008 | Microwave Ovens

1 Answer

Kenmore microwave


The Keypad is a Circuit.Each of the Function Buttons is a switch. The same "Touch" Techinology as is used of your TV Remote Control Pad or your Telephone. It would appear that your Keypad Circuit is Open, not allowing touch commands to reach the Control Board.The Keypad will have to be replaced. Best done by a Professional. I have seen "Rare" cases of a defective Door Switch causing such symptoms.

Jan 26, 2008 | Microwave Ovens

3 Answers

Keypad doesn't work


check control panel and clean the control circuit, any moisture is there clean the circuit. any dry solder is there check overall circuit and confor it ...door switches and sensors

Oct 26, 2007 | Emerson MW8779W Microwave Oven

Not finding what you are looking for?
Dacor DMT2420 1200 Watts Microwave Oven Logo

Related Topics:

1,380 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dacor Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9011 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Are you a Dacor Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...